工程科學學報

<listing id="l9bhj"><var id="l9bhj"></var></listing>

<var id="l9bhj"><strike id="l9bhj"></strike></var>

<menuitem id="l9bhj"></menuitem>

<var id="l9bhj"></var><cite id="l9bhj"><video id="l9bhj"></video></cite>

<menuitem id="l9bhj"></menuitem>

<cite id="l9bhj"><strike id="l9bhj"><listing id="l9bhj"></listing></strike></cite><cite id="l9bhj"><span id="l9bhj"><menuitem id="l9bhj"></menuitem></span></cite>

<var id="l9bhj"></var>

<var id="l9bhj"></var>

<var id="l9bhj"></var>

Just Accepted

Research Progress on Separation and Extraction of Rhenium from Copper Waste Acid

, doi: 10.13374/j.issn2095-9389.2023.04.06.001

A New Swarm Intelligence Method for Multi-Modal Optimization: Sheep Flock Migrate Optimization Algorithm

, doi: 10.13374/j.issn2095-9389.2023.05.23.001

Study on the removal of gaseous mercury by ZnS adsorbent prepared from by-products of zinc smelter

, doi: 10.13374/j.issn2095-9389.2023.03.10.001

Study on pore structure and its evolution characterization in leaching system via morphological open operation

, doi: 10.13374/j.issn2095-9389.2022.12.01.001

Study on the Penetrate model of laminae shale oil under drilling fluid invasion

, doi: 10.13374/j.issn2095-9389.2023.01.28.004

Application and Research Progress of WO3 Hydrate in the Field of Photocatalysis

, doi: 10.13374/j.issn2095-9389.2023.04.13.003

Effect of effective Ca/S ratio on sulfide morphology in a 303 t heavy steel ingot with calcium treatment in molten steel

, doi: 10.13374/j.issn2095-9389.2023.02.17.003

Research on Short-term Prediction of Photothermal Power Generation Based on FCM-LSTM

, doi: 10.13374/j.issn2095-9389.2023.02.24.001

Inhibition effect of CMC in sulfide ores and influencing factors of its inhibition performance

, doi: 10.13374/j.issn2095-9389.2023.02.28.006

Effect of oxygen content on corrosion resistance of steel

, doi: 10.13374/j.issn2095-9389.2023.03.01.001

* 通信作者，E-mail: jiabaorui@ustb.edu.cn，qinml@mater.ustb.edu.cn

, doi: 10.13374/j.issn2095-9389.2023.03.14.001

Performance comparison of different kinds of separators for lithium-ion battery

, doi: 10.13374/j.issn2095-9389.2023.01.16.004

Effect of heating temperature on the hydrogen embrittlement susceptibility in hot stamped medium-Mn steel

, doi: 10.13374/j.issn2095-9389.2023.03.28.001

Simulation of forced flow on the evolution of directional solidification microstructure of Mg-9wt%Al alloy

, doi: 10.13374/j.issn2095-9389.2023.03.05.001

Modeling and Control Simulation of a Rigid-Soft Coupled Underwater Snake Robot

, doi: 10.13374/j.issn2095-9389.2023.04.05.001

Development of a New Fast and High-precision Active Learning Algorithm: Taking the Material Mechanical Properties Prediction of MAX Phase Crystals as Examples

, doi: 10.13374/j.issn2095-9389.2023.03.15.001

Helmet detection method based on improved YOLOv5

, doi: 10.13374/j.issn2095-9389.2022.12.07.002

DFA-ODENets: Research on Predictive Simulation Framework for Periodic Multi-stage Complex Systems

, doi: 10.13374/j.issn2095-9389.2022.12.05.001

Fibrous Xerogel-V2O5·1.6H2O for Long-cycle Aqueous Zinc-ion Batteries

, doi: 10.13374/j.issn2095-9389.2023.02.12.001

Spatial distribution of stochastic discontinuities of Shazaoyuan granite masses in Beishan

, doi: 10.13374/j.issn2095-9389.2022.12.17.001

Study on Rheological Properties and Regulation of Baier Red Mud based foam Light Soil

, doi: 10.13374/j.issn2095-9389.2023.02.04.003

Prediction of environmental severity in Tibet based on the polycarbonate(PC) aging behaviors

, doi: 10.13374/j.issn2095-9389.2023.01.04.002

Contract Text Markup Language (CTML): A Generation Method for Smart Contracts Based on Regularization of Extracting Legal Elements

, doi: 10.13374/j.issn2095-9389.2023.01.13.003

Application of additives for the electrodeposition of metals and alloys from ionic liquids

, doi: 10.13374/j.issn2095-9389.2023.02.17.002

Application of machine learning in predicting service performance of metallic materials

, doi: 10.13374/j.issn2095-9389.2023.03.07.002

Effect of hydrogen on corrosion behavior of duplex stainless steel in oil and gas industry

, doi: 10.13374/j.issn2095-9389.2023.03.06.001

OTFS：An advanced integrated sensing and communication technique in the next-generation V2X

, doi: 10.13374/j.issn2095-9389.2022.12.30.002

Hydrogen based phase transformation separation of high iron and low manganese ores

, doi: 10.13374/j.issn2095-9389.2022.11.03.005

Intelligent edge computing unloading algorithm for space-based LEO satellite network based on GA-DDPG

, doi: 10.13374/j.issn2095-9389.2022.11.30.002

Flotation Behavior and Surface Properties of Spent Lithium-ion Battery Electrode Materials

, doi: 10.13374/j.issn2095-9389.2022.12.05.002

Application of Geometallurgical Modeling in SICOMINES Refractory Copper Cobalt Deposit in Congo (Kinshasa)

, doi: 10.13374/j.issn2095-9389.2023.01.02.001

Hot Deformation Behavior and Microstructure Evolution of SP700 Titanium Alloy

, doi: 10.13374/j.issn2095-9389.2023.03.09.004

Experimental and numerical study on deformation and failure of unsaturated soil induced by gas pressure

, doi: 10.13374/j.issn2095-9389.2022.11.06.001

Action Recognition Model Based on Spatio-temporal Sampling Graph Convolution Network and Self-calibration Mechanism

, doi: 10.13374/j.issn2095-9389.2022.12.25.002

Intelligent human-robot collaborative handover for arbitrary objects based on 6D pose recognition

, doi: 10.13374/j.issn2095-9389.2022.12.03.001

Preparation and performance of ZnSnO3/C composites as anode for lith-ium ion battery

, doi: 10.13374/j.issn2095-9389.2022.12.16.001

Effect of Coarse Aggregates and Hybrid Fibers on the Mechanical Properties of Ultra High Performance Concrete (UHPC)

, doi: 10.13374/j.issn2095-9389.2022.12.21.003

Obstacle avoidance of seven-joint manipulator based on double interpolation trajectory control

, doi: 10.13374/j.issn2095-9389.2022.11.03.001

Synergistic optimization model of sintering allocation cost and energy consumption based on PSO-VIKOR

, doi: 10.13374/j.issn2095-9389.2022.08.30.004

Trip Distance Adaptive Equivalent Hydrogen Consumption Minimization Strategy for Fuel Cell Vehicles integrating Driving Cycle Prediction

, doi: 10.13374/j.issn2095-9389.2022.11.22.005

Combustion spreading law of loose coal under the condition of lateral wind flow on the surface

, doi: 10.13374/j.issn2095-9389.2022.12.02.002

Development and experiment of grippers to prevent debonding in H-shaped steel beams strengthened with CFRP plates

, doi: 10.13374/j.issn2095-9389.2023.01.13.004

Degradation Effect and Failure Characteristics of Granite Under

, doi: 10.13374/j.issn2095-9389.2023.02.17.004

Study on the regulation mechanism of calcination temperature on pozzolanic activity of willow leaf ash

, doi: 10.13374/j.issn2095-9389.2022.10.14.003

Regulation of different modifiers on crystallization properties of silicon-manganese slag glass-ceramics

, doi: 10.13374/j.issn2095-9389.2022.09.24.003

Sulfide All-Solid-State Lithium Battery With LLZTO@Ag Composite Layer Modified Anode and The Research on Its Performance

, doi: 10.13374/j.issn2095-9389.2022.09.26.003

Numerical Study on Impact Resistance of NC-UHPC Composite Beam

, doi: 10.13374/j.issn2095-9389.2022.11.07.002

Molding quality inspection method for large diameter shield tunnel

, doi: 10.13374/j.issn2095-9389.2023.02.04.001

Modeling and intelligent optimization for deployment of defensive weapon systems based on interior point method with barrier functions

, doi: 10.13374/j.issn2095-9389.2022.12.26.002

Impact of vacuum distillation carbon dust on the reactivity of carbon anode

, doi: 10.13374/j.issn2095-9389.2022.11.11.004

Research Progress and Application Prospect of Carbonization of Biomass Materials

, doi: 10.13374/j.issn2095-9389.2022.11.11.005

Research on energy dissipation and fracture characteristics of composite layered rock under dynamic load

, doi: 10.13374/j.issn2095-9389.2022.09.18.011

Voiceprint recognition method based on SE-DR-RES2Block

, doi: 10.13374/j.issn2095-9389.2022.09.19.001

* 通信作者，E-mail: yyhu@sdau.edu.cn; hdyu@sdau.edu.cn; yangkai@sdau.edu.cn

, doi: 10.13374/j.issn2095-9389.2022.12.09.001

DS-YOLOv5: A real-time detection and recognition model for helmet wearing

, doi: 10.13374/j.issn2095-9389.2022.11.11.006

Progress in resource utilization of calcium-based semi-dry desulphurization ash in iron and steel industry

, doi: 10.13374/j.issn2095-9389.2022.12.23.002

Application of expert-augmented machine learning modeling in high-strength and high-conductivity copper alloy development

, doi: 10.13374/j.issn2095-9389.2022.09.19.002

Research on Fault diagnosis method of lithium ion battery internal short circuit based on WOA-VMD and PSO-SVM

, doi: 10.13374/j.issn2095-9389.2022.11.04.004

Status of development of surface treatment technology for copper and its alloys for metallurgical equipment

, doi: 10.13374/j.issn2095-9389.2022.12.12.001

Research progress of laser induced breakdown spectroscopy in improving the accuracy of mining and metallurgical analysis

, doi: 10.13374/j.issn2095-9389.2022.12.16.003

A review on stereolithographic 3D printing of metals

, doi: 10.13374/j.issn2095-9389.2022.10.25.004

Rock Breaking Mechanism and Application of Deep Hole - Hole Staged Blasting in Rock Roadway Based on Digital Electronic Detonator

, doi: 10.13374/j.issn2095-9389.2022.09.20.008

Research on key parameters of soil corrosion and corrosion prediction model in Beijing

, doi: 10.13374/j.issn2095-9389.2022.09.13.002

Progress on Control of Austenite Grain and Secondary Phase Particles of Gear Steel

, doi: 10.13374/j.issn2095-9389.2022.09.21.001

Construction method of digital twin system in production workshop of special transformer

, doi: 10.13374/j.issn2095-9389.2022.09.26.005

A machine learning modeling to predict mechanical properties of duplex stainless steel during low temperature aging

, doi: 10.13374/j.issn2095-9389.2022.11.18.001

Fracture mechanism and fracture precursors of thermally damaged granite uniaxial compression based on acoustic emission information

, doi: 10.13374/j.issn2095-9389.2022.10.21.006

Machine learning in amorphous alloys designing

, doi: 10.13374/j.issn2095-9389.2022.11.11.002

Intelligent measurement method of carbon emission throughout the life cycle of highway construction

, doi: 10.13374/j.issn2095-9389.2022.10.21.001

Progress in resource utilization of waste wind turbine blades

, doi: 10.13374/j.issn2095-9389.2022.10.10.002

Research progress of converter splash mechanism and prediction model technology

, doi: 10.13374/j.issn2095-9389.2022.08.18.002

Effect of Mg content on damping and mechanical properties of AlSi10Sn4MgX alloy

, doi: 10.13374/j.issn2095-9389.2022.11.07.001

Survey of Edge-Edge Collaborative Training for Edge Intelligencee

, doi: 10.13374/j.issn2095-9389.2022.09.26.004

High strength porous NiTi shape memory alloy with stabilized high stress cycles

, doi: 10.13374/j.issn2095-9389.2022.10.10.003

Research progress of metal oxide semiconductor one-dimensional material H2S sensor

, doi: 10.13374/j.issn2095-9389.2022.10.11.001

Study on oxidation characteristics of calcium sulfite in sintering desulphurized ash

, doi: 10.13374/j.issn2095-9389.2022.09.19.004

Heat transfer of power-law fluids with variable thermal conductivity on a horizontal rough surface

, doi: 10.13374/j.issn2095-9389.2022.09.30.003

Analytical formulas for prismatic continuous beams with equal spans

, doi: 10.13374/j.issn2095-9389.2022.08.31.002

The coordination theory fo flotation reagents with metal ions in mineral surfaces

, doi: 10.13374/j.issn2095-9389.2022.05.11.005

Morphology Evolution and Formation Mechanism of Al-Ti-O Inclusions in an Ultra Low Carbon Steel

, doi: 10.13374/j.issn2095-9389.2022.03.02.001

Research progress on prevention and utilization of mine geothermal energy

, doi: 10.13374/j.issn2095-9389.2022.04.11.002

Bearing characteristics of composite foundations for offshore wind turbines

, doi: 10.13374/j.issn2095-9389.2022.02.11.003

Time-dependent reliability analysis of deteriorating reinforced concrete bridges by considering non-stationary processes

, doi: 10.13374/j.issn2095-9389.2020.09.07.001

Reaction Behavior of Biochar Composite Briquette in Blast Furnace

, doi: 10.13374/j.issn2095-9389.2020.11.30.002

Fairness and Energy Co-aware Computation Offloading for Fog-assisted IoT

, doi: 10.13374/j.issn2095-9389.2021.02.19.002

Research on stress-magnetization of the state of flange damage of bridge steel box beam based on magnetic memory detection

, doi: 10.13374/j.issn2095-9389.2020.11.10.002

Editorial Department of Journal of Engineering Sciences

Address：No. 30 College Road, Haidian District, BeijingPost Code：100083 Tel：(010)62333436

Supported by: Beijing Renhe Information Technology Co. Ltd