Rock breaking mechanism and the application of medium-deep hole–in-hole segmented blasting in rock roadway using digital electronic detonators

WANG Guohao; WANG Yanbing; XIE Ping; ZHANG Yinghao; YE Jianjun; CHI Lei

doi:10.13374/j.issn2095-9389.2022.09.20.008

Volume 45 Issue 11

Nov. 2023

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2023 > 45(11): 1820-1832

WANG Guohao, WANG Yanbing, XIE Ping, ZHANG Yinghao, YE Jianjun, CHI Lei. Rock breaking mechanism and the application of medium-deep hole–in-hole segmented blasting in rock roadway using digital electronic detonators[J]. Chinese Journal of Engineering, 2023, 45(11): 1820-1832. doi: 10.13374/j.issn2095-9389.2022.09.20.008

Citation:

WANG Guohao, WANG Yanbing, XIE Ping, ZHANG Yinghao, YE Jianjun, CHI Lei. Rock breaking mechanism and the application of medium-deep hole–in-hole segmented blasting in rock roadway using digital electronic detonators[J]. Chinese Journal of Engineering, 2023, 45(11): 1820-1832. doi: 10.13374/j.issn2095-9389.2022.09.20.008

Citation:

WANG Guohao, WANG Yanbing, XIE Ping, ZHANG Yinghao, YE Jianjun, CHI Lei. Rock breaking mechanism and the application of medium-deep hole–in-hole segmented blasting in rock roadway using digital electronic detonators[J]. Chinese Journal of Engineering, 2023, 45(11): 1820-1832. doi: 10.13374/j.issn2095-9389.2022.09.20.008

PDF( 5363 KB)

Rock breaking mechanism and the application of medium-deep hole–in-hole segmented blasting in rock roadway using digital electronic detonators

doi: 10.13374/j.issn2095-9389.2022.09.20.008

1.
School of Mechanics & Civil Engineering, China University of Mining & Technology (Beijing), Beijing 100083, China
2.
Gubei Coal Mine of Huaizhe Coal and Electricity Co., Ltd, Huainan 232150, China
3.
Beijing Xingbang Digital Technology Co., Ltd, Beijing 102308, China
4.
School of Civil Engineering Architecture & the Environment, Hubei University of Technology, Hubei 430068, China
5.
Shandong Sanjian Assets Investment & Management Co., Ltd, Shandong 250100, China

More Information

Corresponding author: E-mail: ceowyb818@163.com
Received Date: 2022-09-20
Available Online: 2023-02-11
Publish Date: 2023-11-01

Abstract

Abstract

“Cutting is the key to speed” in rock roadway excavation. With the aim of addressing the challenges related to broken rock disposal, low single-cycle penetration, and high block rate in the conventional straight hole and diagonal hole excavation blasting, the method of medium-deep holein-hole segmented blasting is proposed herein. The mathematical relations for the force and resistance required in the process of rock crushing and ejection in the groove of medium-deep hole-in-hole segmented blasting, as well as that for the expected value range of the key parameters of the cutting groove, were determined. LS-DYNA was used to numerically simulate the process of medium-deep hole-in-hole and ordinary wedge cut blasting. The nature of stress wave propagation during medium-deep hole-in-hole segmental blasting and the stress characteristics of the rock at the bottom of the hole were analyzed. Furthermore, the variation characteristics of the stress wave intensity were compared for different segmental proportions, and the optimal segmental proportions were determined. The results of theoretical analysis and numerical simulation were applied to the excavation site of the rock roadway, and the blasting effect indices, such as singlecycle footage, hole utilization rate, eye mark rate, and block rate, of the medium-deep hole-in-hole segmented blasting and the ordinary wedge blasting schemes were compared. The results showed that rock can be ejected from the cavity when the dynamic force is greater than or equal to the resistance during the rock crushing and ejection process and that the resistance to rock ejection in the medium-deep holeinhole segmented blasting is less than that in ordinary wedge cut blasting, and it is easier to blast into the cavity. Best practices for achieving the complete ejection of broken rocks from the cavity are proposed, and theoretical support for determining the parameters, such as the depth of the hole, is provided. As compared to ordinary wedge cut blasting, producing a large blasting cavity through medium-deep hole-in-hole segmented blasting is easier, which is more favorable for subsequent blasting. The optimal ratio of the hole-in-hole segmented blasting was initially determined to be 0.6. Medium and deep hole-inhole segmented blasting increases the single-cycle footage, improves the utilization rate of the hole, reduces the working time, reduces construction cost, and has excellent economic and socialadvantages.
- rock tunnel blasting,
- digital electronic detonator,
- cut blasting,
- medium-deep hole,
- segmentation in hole

FullText(HTML)

References(25)

References

[1]	楊仁樹. 我國煤礦巖巷安全高效掘進技術現狀與展望. 煤炭科學技術, 2013, 41(9):18 Yang R S. Present status and outlook on safety and high efficient heading technology of mine rock roadway in China. Coal Sci Technol, 2013, 41(9): 18
[2]	龔敏, 文斌, 王華. 掏槽參數對煤礦巖巷爆破效果的影響. 爆炸與沖擊, 2015, 35(4):576 Gong M, Wen B, Wang H. Influences of cut parameters on blasting effect in rock roadway of coal mine. Explos Shock Waves, 2015, 35(4): 576
[3]	王文龍. 鉆眼爆破. 北京:煤炭工業出版社, 1984 Wang W L. Drilling Blasting. Beijing: China Coal Industry Publishing House, 1984
[4]	楊仁樹, 張召冉, 楊立云, 等. 基于硬巖快掘技術的切縫藥包聚能爆破試驗研究. 巖石力學與工程學報, 2013, 32(2):317 Yang R S, Zhang Z R, Yang L Y, et al. Cumulative blasting experiment study of slotted cartridge based on hard-rock rapid driving technology. Chin J Rock Mech Eng, 2013, 32(2): 317
[5]	袁文華, 馬芹永, 黃偉. 楔形掏槽微差爆破模型試驗與分析. 巖石力學與工程學報, 2012, 31(S1):3352 Yuan W H, Ma Q Y, Huang W. Model experiment and analysis of wedge-shaped cutting millisecond blasting. Chin J Rock Mech Eng, 2012, 31(S1): 3352
[6]	李廷春, 劉洪強. 煤礦下山巷道爆破掘進技術試驗研究. 巖土力學, 2012, 33(1):35 Li T C, Liu H Q. Experimental study of blasting technology of dip roadway excavation in coal mine. Rock Soil Mech, 2012, 33(1): 35
[7]	張奇, 楊永琦, 金乾坤, 等. 直眼掏槽爆破機理若干基本問題的研究. 煤炭學報, 1997(3):62 Zhang Q, Yang Y Q, Jin Q K, et al. Study of some aspects of mechanismin straight cut blasting. J China Coal Soc, 1997(3): 62
[8]	張召冉, 陳華義, 矯偉剛, 等. 含空孔直眼掏槽空孔效應及爆破參數研究. 煤炭學報, 2020, 45(S2):791 Zhang Z R, Chen H Y, Jiao W G, et al. Rock breaking mechanism and blasting parameters of straight-hole cutting with empty-hole. J China Coal Soc, 2020, 45(S2): 791
[9]	單仁亮, 周紀軍, 黃寶龍, 等. 巷道掏槽爆破影響因素分析. 煤炭科學技術, 2010, 38(2):25 Shan R L, Zhou J J, Huang B L, et al. Analysis on slotting blasting influence factors of mine roadway. Coal Sci Technol, 2010, 38(2): 25
[10]	胡坤倫, 楊仁樹, 徐曉峰, 等. 煤礦深部巖巷掘進爆破試驗研究. 遼寧工程技術大學學報, 2007, 136(6):856 Hu K L, Yang R S, Xu X F, et al. Blasting test and study on driving of deep-seated rock tunnels of coal mines. J Liaoning Tech Univ, 2007, 136(6): 856
[11]	宗琦, 劉菁華. 煤礦巖石巷道中深孔爆破掏槽技術應用研究. 爆破, 2010, 27(4):35 Zong Q, Liu J H. Application research on cutting technology of mid-deep hole blasting in coal mine rock tunnel. Blasting, 2010, 27(4): 35
[12]	王漢軍, 楊仁樹, 李清. 深部巖巷爆破機理分析和爆破參數設計. 煤炭學報, 2007, 151(4):373 Wang H J, Yang R S, Li Q. Analysis of blasting mechanism for deep rock tunneling and blasting parameters design. J China Coal Soc, 2007, 151(4): 373
[13]	陳士海, 魏海霞, 薛愛芝. 堅硬巖石巷道中深孔掏槽爆破試驗研究. 巖石力學與工程學報, 2007, 192(S1):3498 Chen S H, Wei H X, Xue A Z. Testing study on middle deep cut-hole blasting in hard rock tunnel. Chin J Rock Mech Eng, 2007, 192(S1): 3498
[14]	龔敏, 王燦華, 梁立勛, 等. 硬巖掘進中主要爆破參數的確定與作用. 煤炭學報, 2015, 40(7):1526 Gong M, Wang C H, Liang L X, et al. Function analysis and confirming method of key blasting parameters for excavating in hard rock. J China Coal Soc, 2015, 40(7): 1526
[15]	楊國梁, 姜琳琳, 楊仁樹. 復式楔形深孔掏槽爆破研究. 中國礦業大學學報, 2013, 42(5):755 Yang G L, Jiang L L, Yang R S. Investigation of cut blasting with duplex wedge deep holes. J China Univ Min Technol, 2013, 42(5): 755
[16]	胡建華, 楊春, 周科平, 等. 單楔形掏槽爆破腔體時空演化及應用. 中南大學學報(自然科學版), 2017, 48(12):3309 Hu J H, Yang C, Zhou K P, et al. Temporal-spatial evolution and application of blasting cavity of single wedge cutting. J Cent South Univ (Sci Technol), 2017, 48(12): 3309
[17]	余永強, 王超, 褚懷保, 等. 硬巖巷道中深孔爆破掘進復楔形掏槽試驗研究. 爆破, 2013, 30(2):95 Yu Y Q, Wang C, Chu H B, et al. Duplex wedge cutting on mid-depth borehole tunneling blasting in hard rock. Blasting, 2013, 30(2): 95
[18]	戴俊. 柱狀裝藥爆破的巖石壓碎圈與裂隙圈計算. 遼寧工程技術大學學報(自然科學版), 2001, 20(2):144 Dai J. Calculation of radii of the broken and cracked areas in rock by a long charge explosion. J Liaoning Tech Univ (Nat Sci Ed), 2001, 20(2): 144
[19]	張奇. 巖石爆破的粉碎區及其空腔膨脹. 爆炸與沖擊, 1990(1):68 Zhang Q. Smash districts and expanding of cavities in rock blasting. Explos Shock Waves, 1990(1): 68
[20]	宗琦. 巖石內爆炸應力波破裂區半徑的計算. 爆破, 1994(2):15 Zong Q. Calculation of radius of stress wave rupture zone in rock explosion. Blasting, 1994(2): 15
[21]	張召冉, 楊仁樹. 巖石巷道“多階段”掏槽技術及應用研究. 巖石力學與工程學報, 2019, 38(3):551 Zhang Z R, Yang R S. Multi-step cutting technology and its application in rock roadways. Chin J Rock Mech Eng, 2019, 38(3): 551
[22]	劉洪永. 遠程采動煤巖體變形與卸壓瓦斯流動氣固耦合動力學模型及其應用研究. 煤炭學報, 2011, 36(7):1243 doi: 10.13225/j.cnki.jccs.2011.07.023 Liu H Y. Fully coupled model and engineering application for deformation and pressure-relief gas flow of remote coal and rock mass due to mining. J China Coal Soc, 2011, 36(7): 1243 doi: 10.13225/j.cnki.jccs.2011.07.023
[23]	杜俊林, 羅強, 宗琦. 空氣不耦合裝藥爆破孔壁沖擊壓力分析. 西安科技大學學報, 2005(3):306 doi: 10.3969/j.issn.1672-9315.2005.03.009 Du J L, Luo Q, Zong Q. Analysis on preliminary shock pressure on borehole of air-de-coupling charging. J Xi’an Univ Sci Technol, 2005(3): 306 doi: 10.3969/j.issn.1672-9315.2005.03.009
[24]	Wang Y B, Wen Z J, Liu G Q, et al. Explosion propagation and characteristics of rock damage in decoupled charge blasting based on computed tomography scanning. Int J Rock Mech Min Sci, 2020, 136: 104540 doi: 10.1016/j.ijrmms.2020.104540
[25]	汪海波, 宗琦, 趙要才. 立井大直徑中空孔直眼掏槽爆炸應力場數值模擬分析與應用. 巖石力學與工程學報, 2015, 34(S1):3223 doi: 10.13722/j.cnki.jrme.2014.0296 Wang H B, Zong Q, Zhao Y C. Numerical analysis and application of large diameter cavity parallel cut blasting stress field in vertical shaft. Chin J Rock Mech Eng, 2015, 34(S1): 3223 doi: 10.13722/j.cnki.jrme.2014.0296