Acoustic Emission Mechanism in Cutting Process

Tang Ying; Gu Chongxian; Sun Rongping; Chen Kexing

doi:10.13374/j.issn1001-053x.1995.05.008

Volume 17 Issue 5

Sep. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1995 > 17(5): 439-443

Tang Ying, Gu Chongxian, Sun Rongping, Chen Kexing. Acoustic Emission Mechanism in Cutting Process[J]. Chinese Journal of Engineering, 1995, 17(5): 439-443. doi: 10.13374/j.issn1001-053x.1995.05.008

Citation:

Tang Ying, Gu Chongxian, Sun Rongping, Chen Kexing. Acoustic Emission Mechanism in Cutting Process[J]. Chinese Journal of Engineering, 1995, 17(5): 439-443. doi: 10.13374/j.issn1001-053x.1995.05.008

Tang Ying, Gu Chongxian, Sun Rongping, Chen Kexing. Acoustic Emission Mechanism in Cutting Process[J]. Chinese Journal of Engineering, 1995, 17(5): 439-443. doi: 10.13374/j.issn1001-053x.1995.05.008

Citation:

PDF( 384 KB)

Acoustic Emission Mechanism in Cutting Process

doi: 10.13374/j.issn1001-053x.1995.05.008

1. College of Mechanical Engineering, USTB, Beijing 100083, PRC;
2. Department of Mechanical Engineering, Xi'an Jiaotong University

Received Date: 1994-09-24
Available Online: 2021-09-06

Abstract

Abstract

The mechanism of Acoustic Emission phenomenon in cutting process is studied.A analytical model relating the acoustic emission signal energy content to the cutting process parameters in orthogonal metal cutting is presented.Its correction is confirmed by the result of experiments carried out in turning process.
- acoustic Emission,
- cutting,
- model