Citation: | ZHANG Lian-fu, WANG Hong-jiang, WU Ai-xiang, YANG Ke. Study of the effect of particle size on the thixotropy of tailings pastes[J]. Chinese Journal of Engineering, 2023, 45(1): 1-8. doi: 10.13374/j.issn2095-9389.2021.07.09.006 |
[1] |
Yin S H, Shao Y J, Wu A X, et al. A systematic review of paste technology in metal mines for cleaner production in China. J Clean Prod, 2020, 247: 119590 doi: 10.1016/j.jclepro.2019.119590
|
[2] |
楊柳華, 王洪江, 吳愛祥, 等. 全尾砂膏體攪拌剪切過程的觸變性. 工程科學學報, 2016, 38(10):1343
Yang L H, Wang H J, Wu A X, et al. Thixotropy of unclassified pastes in the process of stirring and shearing. Chin J Eng, 2016, 38(10): 1343
|
[3] |
Mewis J, Wagner N J. Thixotropy. Adv Colloid Interface Sci, 2009, 147-148: 214 doi: 10.1016/j.cis.2008.09.005
|
[4] |
Barnes H A. Thixotropy—a review. J Non Newton Fluid Mech, 1997, 70(1-2): 1 doi: 10.1016/S0377-0257(97)00004-9
|
[5] |
Merrill J, Voisin L, Montenegro V, et al. Slurry rheology prediction based on hyperspectral characterization models for minerals quantification. Miner Eng, 2017, 109: 126 doi: 10.1016/j.mineng.2017.03.009
|
[6] |
Zhang L F, Wang H J, Wu A X, et al. A constitutive model for thixotropic cemented tailings backfill pastes. J Non Newton Fluid Mech, 2021, 295: 104548 doi: 10.1016/j.jnnfm.2021.104548
|
[7] |
Adiguzel D, Bascetin A. The investigation of effect of particle size distribution on flow behavior of paste tailings. J Environ Manag, 2019, 243: 393 doi: 10.1016/j.jenvman.2019.05.039
|
[8] |
Leong Y K, Scales P J, Healy T W, et al. Effect of particle size on colloidal zirconia rheology at the isoelectric point. J Am Ceram Soc, 1995, 78(8): 2209 doi: 10.1111/j.1151-2916.1995.tb08638.x
|
[9] |
Boger D V. Rheology of slurries and environmental impacts in the mining industry. Annu Rev Chem Biomol Eng, 2013, 4: 239 doi: 10.1146/annurev-chembioeng-061312-103347
|
[10] |
Boger D V. Rheology and the minerals industry. Miner Process Extr Metall Rev, 2000, 20(1): 1 doi: 10.1080/08827509908962460
|
[11] |
Mangesana N, Chikuku R S, Mainza A N, et al. The effect of particle sizes and solids concentration on the rheology of silica sand based suspensions. J S Afr I Min Metall, 2008, 108(4): 237
|
[12] |
Cheng D C H, Kruszewski A P, Senior J R, et al. The effect of particle size distribution on the rheology of an industrial suspension. J Mater Sci, 1990, 25(1): 353 doi: 10.1007/BF00544230
|
[13] |
He M Z, Wang Y M, Forssberg E. Slurry rheology in wet ultrafine grinding of industrial minerals: A review. Powder Technol, 2004, 147(1-3): 94 doi: 10.1016/j.powtec.2004.09.032
|
[14] |
劉曉輝, 吳愛祥, 王洪江, 等. 膏體流變參數影響機制及計算模型. 工程科學學報, 2017, 39(2):190
Liu X H, Wu A X, Wang H J, et al. Influence mechanism and calculation model of CPB rheological parameters. Chin J Eng, 2017, 39(2): 190
|
[15] |
劉曉輝. 膏體流變行為及其管流阻力特性研究[學位論文]. 北京: 北京科技大學, 2015
Liu X H. Study on Rheological Behavior and Pipe Flow Resistance of Paste Backfill [Dissertation]. Beijing: University of Science and Technology Beijing, 2015
|
[16] |
Moore F. The rheology of ceramic slip and bodies. Trans Brit Ceram Soc, 1959, 58: 470
|
[17] |
Armstrong M J, Beris A N, Rogers S A, et al. Dynamic shear rheology and structure kinetics modeling of a thixotropic carbon black suspension. Rheol Acta, 2017, 56(10): 811 doi: 10.1007/s00397-017-1038-8
|
[18] |
Wei Y F, Solomon M J, Larson R G. Quantitative nonlinear thixotropic model with stretched exponential response in transient shear flows. J Rheol, 2016, 60(6): 1301 doi: 10.1122/1.4965228
|
[19] |
程海勇. 時−溫效應下膏體流變參數及管阻特性[學位論文]. 北京: 北京科技大學, 2018
Cheng H Y. Characteristics of Rheological Parameters and Pipe Resistance under the Time-Temperature Effect [Dissertation]. Beijing: University of Science and Technology Beijing, 2018
|
[20] |
楊柳華. 膏體攪拌過程流變特性及剪切作用機制研究[學位論文]. 北京: 北京科技大學, 2020
Yang L H. Research on the Rheological Characteristics and the Mechanism of Shear Action During Paste Mixing [Dissertation], Beijing: University of Science and Technology Beijing, 2020
|
[21] |
Derksen J J. Simulations of thixotropic liquids. Appl Math Model, 2011, 35(4): 1656 doi: 10.1016/j.apm.2010.09.042
|
[22] |
Kwak M, James D F, Klein K A. Flow behaviour of tailings paste for surface disposal. Int J Miner Process, 2005, 77(3): 139 doi: 10.1016/j.minpro.2005.06.001
|
[23] |
de Souza Mendes P R, Thompson R L. A unified approach to model elasto-viscoplastic thixotropic yield-stress materials and apparent yield-stress fluids. Rheol Acta, 2013, 52(7): 673 doi: 10.1007/s00397-013-0699-1
|
[24] |
Figoni P I, Shoemaker C F. Characterization of time dependent flow properties of mayonnaise under steady shear. J Texture Stud, 1983, 14(4): 431 doi: 10.1111/j.1745-4603.1983.tb00360.x
|
[25] |
Tangsathitkulchai C. The effect of slurry rheology on fine grinding in a laboratory ball mill. Int J Miner Process, 2003, 69(1-4): 29 doi: 10.1016/S0301-7516(02)00061-3
|
[26] |
Roussel N. A thixotropy model for fresh fluid concretes: Theory, validation and applications. Cem Concr Res, 2006, 36(10): 1797 doi: 10.1016/j.cemconres.2006.05.025
|