Electrolytic properties and element migration behavior in a Fe-TiB2/Al2O3 composite cathode

LIANG Yu-dong; WANG Li-jun; CHAI Deng-peng; NIU Ting-ting; BAO Sheng-zhong; WANG Jun-wei; LIU Ying

doi:10.13374/j.issn2095-9389.2019.08.010

Volume 41 Issue 8

Aug. 2019

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2019 > 41(8): 1045-1051

LIANG Yu-dong, WANG Li-jun, CHAI Deng-peng, NIU Ting-ting, BAO Sheng-zhong, WANG Jun-wei, LIU Ying. Electrolytic properties and element migration behavior in a Fe-TiB2/Al2O3 composite cathode[J]. Chinese Journal of Engineering, 2019, 41(8): 1045-1051. doi: 10.13374/j.issn2095-9389.2019.08.010

Citation:

LIANG Yu-dong, WANG Li-jun, CHAI Deng-peng, NIU Ting-ting, BAO Sheng-zhong, WANG Jun-wei, LIU Ying. Electrolytic properties and element migration behavior in a Fe-TiB₂/Al₂O₃ composite cathode[J]. Chinese Journal of Engineering, 2019, 41(8): 1045-1051. doi: 10.13374/j.issn2095-9389.2019.08.010

Citation:

PDF( 5451 KB)

Electrolytic properties and element migration behavior in a Fe-TiB₂/Al₂O₃ composite cathode

doi: 10.13374/j.issn2095-9389.2019.08.010

1.
Zhengzhou Non-ferrous Metals Researchinstitute Co.Ltd of CHALCO, Zhengzhou 450041, China
2.
Rare Metals & Metallurgy Materials Research Institute, General Research Institute for Nonferrous Metals, Beijing 100088, China

More Information

Corresponding author: WANG Li-jun, E-mail: gold@grinm.com
Received Date: 2018-07-16
Publish Date: 2019-08-01

Abstract

Abstract

Wettable cathodes are a very important part of the non-carbon electrolysis process. This study prepared Fe-TiB₂/Al₂O₃ composite cathode materials by cold pressing and sintering using alumina sol as a binder and metal Fe as a sintering agent for aluminum electrolysis. The electrolytic performance of aluminum electrolysis was studied using a 20 A electrolysis test, and the composite cathode materials before and after the test were analyzed via EDS. The migration behavior of various elements in the electrolysis process was studied by composition analysis. The results show that Fe metal can effectively fill the gap between the aggregates during the sintering process. Hence, the sintering density of the composite cathode material can be significantly improved. In the 20 A electrolysis test, the voltage is stable, the current efficiency is 93.2%, the original aluminum quality is 99.47%, and the impurity in the aluminum liquid is 0.53%. After the electrolysis test, the aluminum liquid can moisten the cathode surface effectively. Therefore, the Fe-TiB₂/Al₂O₃ composite is an ideal wettable cathode material. Based on the EDS analysis of the composite cathode electrolysis, the alkali metal in the liquid electrolyte permeates into the cathode material during the electrolysis process. Subsequently, alkali metals gradually penetrate into the binder phase and fill the voids that are not completely filled by alumina sol or metal sintering additives. As the electrolysis proceeds, the penetration depth of the element K is greater than that of Na. The Al generated at the cathode surface also enters the cathode through the gap of the composite material. However, owing to the gap in the cathode, the Fe metal in the cathode will also be reversely dispersed into the liquid aluminum. This study indicates that the stability of the aluminum liquid layer on the cathode surface is the foundation for efficient and stable operation of the cathode.
- TiB₂ composite,
- aluminum electrolysis,
- wettable cathode,
- alumina sol,
- sintering,
- element migration

FullText(HTML)

References(12)

References

[1]	Viswanath R P. A patent for generation of electrolytic hydrogen by a cost effective and cheaper route. Int J Hydrogen Energy, 2004, 29(11): 1191 http://www.sciencedirect.com/science/article/pii/S0360319904000722
[2]	Hryn J N, Pellin M J. A dynamic inert metal anode//Light Metals 1999: Proceedings of the Technical Sessions Presented by the Tms Aluminum Committee at the 128th Tms Annual Meeting. San Diego, 1999: 377
[3]	Espen O, Jomar T. The behavior of Feckel ferrite cermet materials as inert anodes//Light Metals 1996: Proceedings of the Technical Sessions Presented by the Tms Aluminum Committee at the 125th Tms Annual Meeting. Anaheim, 1996: 249
[4]	Alton T, Jim B, Ivan E, et al. The operational performance of 70 kA prebake cells retrofitted with TiB₂-G cathode elements//Light Metals 1998: Proceedings of the Technical Sessions Presented by the Tms Aluminum Committee at the 127th Tms Annual Meeting. San Antonio, 1998: 257 http://www.researchgate.net/publication/293341903_Operational_performance_of_70_kA_prebake_cells_retrofitted_with_TiB_2-G_cathode_elements
[5]	Alcom T R, Tabereaux A T, Richards N E. Operational results of pilot cell test with cermet inert anodes//Light Metals 1998: Proceedings of the Technical Sessions Presented by the Tms Aluminum Committee at the 127th Tms Annual Meeting. San Antonio, 1998: 433
[6]	Liao X A, ?ye H A. Effects of carbon-bonded coatings on sodium expansion of the cathode in aluminum electrolysis//Light Metals 1999: Proceedings of the Technical Sessions Presented by the Tms Aluminum Committee at the 128th Tms Annual Meeting. San Diego, 1999: 629
[7]	Kang S H, Kim D J, Kang E S, et al. Pressureless sintering and properties of titanium diboride ceramics containing chromium and iron. J Am Ceram Soc, 2001, 84(4): 893 doi: 10.1111/j.1151-2916.2001.tb00763.x
[8]	Finch C B, Tannery V J. Crack formation and swelling of TiB₂-Ni ceramics in liquid aluminum. J Am Ceram Soc, 1982, 65(7): c100 doi: 10.1111/j.1151-2916.1982.tb10473.x
[9]	Escribano S, Blachot J F, Ethève J, et al. Characterization of PEMFCs gas diffusion layers properties. J Power Sources, 2006, 156(1): 8 doi: 10.1016/j.jpowsour.2005.08.013
[10]	Sekhar J A, de Nora, Liu J, et al. TiB₂/colloidal alumina carbon cathode coatings in Hall-Heroult and drained cells//Light Metals 1998: Proceedings of the Technical Sessions Presented by the Tms Aluminum Committee at the 127th Tms Annual Meeting. San Antonio, 1998: 605 http://www.researchgate.net/publication/296514887_TiB_2colloidal_alumina_carbon_cathode_coatings_in_Hall-Heroult_and_drained_cells
[11]	?ye H A, de Nora V, Duruz J J, et al. Properties of a colloidal alumina-bonded TiB₂ coating on cathode carbon materials//Light Metals 1997: Proceedings of the Technical Sessions Presented by the Tms Aluminum Committee at the 126th Tms Annual Meeting. Orlando, 1997: 1171
[12]	韓碩, 李劼, 張凱, 等. 鋁電解用TiB₂/Al₂O₃復合陰極的燒結與性能研究. 有色金屬(冶煉部分), 2011(9): 13 doi: 10.3969/j.issn.1007-7545.2011.09.004 Han S, Li J, Zhang K, et al. Sintering and properties of TiB₂/Al₂O₃ composite cathode for aluminum electrolysis. Nonferrous Met (Extr Metall), 2011(9): 13 doi: 10.3969/j.issn.1007-7545.2011.09.004