Research method and measure analysis of transverse temperature in hot rolling strip

ZHANG Jie; LI Na; CAO Jianguo; LI Hongbo; SI Xiaoming; WANG Qiang

doi:10.13374/j.issn1001-053x.2007.s2.070

Volume 29 Issue S2

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2007 > 29(S2): 140-143

ZHANG Jie, LI Na, CAO Jianguo, LI Hongbo, SI Xiaoming, WANG Qiang. Research method and measure analysis of transverse temperature in hot rolling strip[J]. Chinese Journal of Engineering, 2007, 29(S2): 140-143. doi: 10.13374/j.issn1001-053x.2007.s2.070

Citation:

ZHANG Jie, LI Na, CAO Jianguo, LI Hongbo, SI Xiaoming, WANG Qiang. Research method and measure analysis of transverse temperature in hot rolling strip[J]. Chinese Journal of Engineering, 2007, 29(S2): 140-143. doi: 10.13374/j.issn1001-053x.2007.s2.070

Citation:

PDF( 485 KB)

Research method and measure analysis of transverse temperature in hot rolling strip

doi: 10.13374/j.issn1001-053x.2007.s2.070

1. Mechanical Engineering School, University of Science and Technology Beijing, Beijing 10083, China;
2. Maanshan Iron and Steel Co. Ltd., Maanshan 243003, China

Received Date: 2007-10-17
Available Online: 2021-08-16

Abstract

Abstract

The research methods and distributions of strip transverse temperature were analyzed.The strip transverse temperature was measured on the outer of the No.7 stand of 1800 mm finishing rolling group.To attain the typical distribution of the transverse temperature,the described parameters were proposed.The distribution characteristic and the relationship among temperature distribution,strip width and longitudinal temperature were studied with these parameters,and these provided the reference for building the control model of hot strip transverse temperature.
- hot rolling strip,
- transverse temperature,
- distribution characteristic,
- influence factors