Calculation and analysis of sulphide capacity and sulphur partition ratio

HAO Ning; WANG Haitao; WANG Xinhua; LI Hong; WANG Wanjun

doi:10.13374/j.issn1001-053x.2006.01.006

Volume 28 Issue 1

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2006 > 28(1): 25-28

HAO Ning, WANG Haitao, WANG Xinhua, LI Hong, WANG Wanjun. Calculation and analysis of sulphide capacity and sulphur partition ratio[J]. Chinese Journal of Engineering, 2006, 28(1): 25-28. doi: 10.13374/j.issn1001-053x.2006.01.006

Citation:

HAO Ning, WANG Haitao, WANG Xinhua, LI Hong, WANG Wanjun. Calculation and analysis of sulphide capacity and sulphur partition ratio[J]. Chinese Journal of Engineering, 2006, 28(1): 25-28. doi: 10.13374/j.issn1001-053x.2006.01.006

Citation:

PDF( 395 KB)

Calculation and analysis of sulphide capacity and sulphur partition ratio

doi: 10.13374/j.issn1001-053x.2006.01.006

Metallurgical and Ecological Engineering School, University of Science and Technology Beijing, Beijing 100083, China

Received Date: 2004-11-20
Rev Recd Date: 2005-02-28

Available Online: 2021-08-24

Abstract

Abstract

The theoretical background of calculating sulphide capacity by the KTH model and the method of calculating sulphur partition ratio were introduced. Some parameters that affect the sulphur partition ratio were studied. The result showed that (1) the sulphur partition ratio increased with the increase of [%C], [%Al] and decreased with the increase in temperature; and (2) the sulphide capacity increased with the increase in temperature and decreased with the increase of [% Al₂O₃]/[% CaO] in the slag.
- sulphide capacity,
- sulphur partition ratio,
- effect factors,
- temperature