Load distribution optimization helpful to shape control of hot strip mills

LUO Yongjun; WANG Zhangsong; CAO Jianguo; JIN Lina; YAO Gengyun

doi:10.13374/j.issn1001-053x.2005.01.024

Volume 27 Issue 1

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2005 > 27(1): 94-97

LUO Yongjun, WANG Zhangsong, CAO Jianguo, JIN Lina, YAO Gengyun. Load distribution optimization helpful to shape control of hot strip mills[J]. Chinese Journal of Engineering, 2005, 27(1): 94-97. doi: 10.13374/j.issn1001-053x.2005.01.024

Citation:

LUO Yongjun, WANG Zhangsong, CAO Jianguo, JIN Lina, YAO Gengyun. Load distribution optimization helpful to shape control of hot strip mills[J]. Chinese Journal of Engineering, 2005, 27(1): 94-97. doi: 10.13374/j.issn1001-053x.2005.01.024

Citation:

PDF( 445 KB)

Load distribution optimization helpful to shape control of hot strip mills

doi: 10.13374/j.issn1001-053x.2005.01.024

1. China Metallurgical Equipment Corporation, Beijing 100016, China;
2. Mechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China

Received Date: 2004-03-29
Rev Recd Date: 2004-09-15

Available Online: 2021-08-17

Abstract

Abstract

The integrated control of gauge and shape in hot strip mills is important and difficult. Rolling force is the key factor of gauge control, also is one of the major factors of shape control. A strategy was introduced to optimize the load distribution helpful to shape control and the relative parameters were obtained by means of immune genetic algorithm. Experimental results show that the strategy is valid, which provides another way for the integrated control of gauge and shape and can be used to guide production in practice.
- load distribution,
- gauge and shape,
- hot strip mills,
- immune genetic algorithm