Numerical Simulation of Fluid Flow in Continuous Slab-Casting Mold

YU Huixiang; ZHANG Jiongming; WANG Wanjun; WANG Xinhua; YANG Zhenya; YANG Lixin

doi:10.13374/j.issn1001-053x.2002.05.003

Volume 24 Issue 5

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2002 > 24(5): 492-496

YU Huixiang, ZHANG Jiongming, WANG Wanjun, WANG Xinhua, YANG Zhenya, YANG Lixin. Numerical Simulation of Fluid Flow in Continuous Slab-Casting Mold[J]. Chinese Journal of Engineering, 2002, 24(5): 492-496. doi: 10.13374/j.issn1001-053x.2002.05.003

Citation:

YU Huixiang, ZHANG Jiongming, WANG Wanjun, WANG Xinhua, YANG Zhenya, YANG Lixin. Numerical Simulation of Fluid Flow in Continuous Slab-Casting Mold[J]. Chinese Journal of Engineering, 2002, 24(5): 492-496. doi: 10.13374/j.issn1001-053x.2002.05.003

Citation:

PDF( 551 KB)

Numerical Simulation of Fluid Flow in Continuous Slab-Casting Mold

doi: 10.13374/j.issn1001-053x.2002.05.003

1. Metallurgy School, UST Beijing, Beijing 100083, China;
2. Beijing Agency of ATE

Received Date: 2001-08-20
Available Online: 2021-08-26

Abstract

Abstract

The commercial code CFX4.3 was applied to simulate fluid flow in the mold of No.l continuous slab-casting machine in BaoSteel. The simulated velocity vector at the nozzle outlet ports was used as inlet boundary conditions of the mold. Results indicated that the velocity vector was not evenly distributed at the nozzle outlets and its direction may not be consistent with the ports. For this reason, it was necessary to connect the nozzle simulation results with the mold model to better reflect the real flow field.
- mold,
- submerged entry nozzle,
- flow field,
- numerical simulation