Process Factors to Effect of Electro-slag Induct Continuous Casting of Unidirectional Solidification Stability

CHANG guowei; YUAN Junping; WANG Zidong; WU Chunjing; WANG Xinhua; HU Hanqi

doi:10.13374/j.issn1001-053x.2000.01.030

Volume 22 Issue 1

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2000 > 22(1): 19-22

CHANG guowei, YUAN Junping, WANG Zidong, WU Chunjing, WANG Xinhua, HU Hanqi. Process Factors to Effect of Electro-slag Induct Continuous Casting of Unidirectional Solidification Stability[J]. Chinese Journal of Engineering, 2000, 22(1): 19-22. doi: 10.13374/j.issn1001-053x.2000.01.030

Citation:

CHANG guowei, YUAN Junping, WANG Zidong, WU Chunjing, WANG Xinhua, HU Hanqi. Process Factors to Effect of Electro-slag Induct Continuous Casting of Unidirectional Solidification Stability[J]. Chinese Journal of Engineering, 2000, 22(1): 19-22. doi: 10.13374/j.issn1001-053x.2000.01.030

Citation:

CHANG guowei, YUAN Junping, WANG Zidong, WU Chunjing, WANG Xinhua, HU Hanqi. Process Factors to Effect of Electro-slag Induct Continuous Casting of Unidirectional Solidification Stability[J]. Chinese Journal of Engineering, 2000, 22(1): 19-22. doi: 10.13374/j.issn1001-053x.2000.01.030

PDF( 506 KB)

Process Factors to Effect of Electro-slag Induct Continuous Casting of Unidirectional Solidification Stability

doi: 10.13374/j.issn1001-053x.2000.01.030

1. Metallurgy School, UST Beijing, Beliing 100083, China;
2. Guangzhou Nonferrous Metal Institute, Guangzhou 510651, China;
3. Material Science and Engineering School, UST Beijing, Beijing 100083 China

Received Date: 1999-09-20

Abstract

Abstract

Process factors to effect of stability of electro-slag induct continuous casting of unidirectional solidification have been researched. Results declared that, position of solid-liquid surface is an impotrant target in measuring process stability, and process factor affected the process stability by this target. There are two key factors in process progressing steadily. The first is positive taper cavity of mold; the second is temperature distribute in mold wall.
- continuous casting,
- unidirectional solidification,
- electro-slag remelting