Analysis of Cross with Finite Element

Jing Zhihong; Guan Kezhi; Li Bin; Li Aiqun

doi:10.13374/j.issn1001-053x.1997.s1.024

Volume 19 Issue S1

Sep. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1997 > 19(S1): 93-96

Jing Zhihong, Guan Kezhi, Li Bin, Li Aiqun. Analysis of Cross with Finite Element[J]. Chinese Journal of Engineering, 1997, 19(S1): 93-96. doi: 10.13374/j.issn1001-053x.1997.s1.024

Citation:

Jing Zhihong, Guan Kezhi, Li Bin, Li Aiqun. Analysis of Cross with Finite Element[J]. Chinese Journal of Engineering, 1997, 19(S1): 93-96. doi: 10.13374/j.issn1001-053x.1997.s1.024

Jing Zhihong, Guan Kezhi, Li Bin, Li Aiqun. Analysis of Cross with Finite Element[J]. Chinese Journal of Engineering, 1997, 19(S1): 93-96. doi: 10.13374/j.issn1001-053x.1997.s1.024

Citation:

Jing Zhihong, Guan Kezhi, Li Bin, Li Aiqun. Analysis of Cross with Finite Element[J]. Chinese Journal of Engineering, 1997, 19(S1): 93-96. doi: 10.13374/j.issn1001-053x.1997.s1.024

PDF( 377 KB)

Analysis of Cross with Finite Element

doi: 10.13374/j.issn1001-053x.1997.s1.024

1. College of Mechanical Engineering, USTB, Beijing 100083, PRC;
2. Taiyuan Iron&Steel Company, Taiyuan 030003, PRC

Received Date: 1996-03-20
Available Online: 2021-09-10

Abstract

Abstract

Cross pin type universal spindle of 1 549 mm mill is analyzed with finite element.Distribution law of displacement and stress of cross-pin of the universal spindle are determined. Calculated results of cross-pin are compared under uniform load and triangle distributing load.
- cross pin,
- finite element,
- univelsal spindle