Analysis of Injecting System of Converter Hot-shooting

Ju Yichun; Zhu Yunyan

doi:10.13374/j.issn1001-053x.1997.s1.013

Volume 19 Issue S1

Sep. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1997 > 19(S1): 48-51

Ju Yichun, Zhu Yunyan. Analysis of Injecting System of Converter Hot-shooting[J]. Chinese Journal of Engineering, 1997, 19(S1): 48-51. doi: 10.13374/j.issn1001-053x.1997.s1.013

Citation:

Ju Yichun, Zhu Yunyan. Analysis of Injecting System of Converter Hot-shooting[J]. Chinese Journal of Engineering, 1997, 19(S1): 48-51. doi: 10.13374/j.issn1001-053x.1997.s1.013

Ju Yichun, Zhu Yunyan. Analysis of Injecting System of Converter Hot-shooting[J]. Chinese Journal of Engineering, 1997, 19(S1): 48-51. doi: 10.13374/j.issn1001-053x.1997.s1.013

Citation:

Ju Yichun, Zhu Yunyan. Analysis of Injecting System of Converter Hot-shooting[J]. Chinese Journal of Engineering, 1997, 19(S1): 48-51. doi: 10.13374/j.issn1001-053x.1997.s1.013

PDF( 380 KB)

Analysis of Injecting System of Converter Hot-shooting

doi: 10.13374/j.issn1001-053x.1997.s1.013

College of Mechanical Engineering, USTB, Beijing 100083, PRC

Received Date: 1996-03-20
Available Online: 2021-09-10

Abstract

Abstract

This paper discusses the application and development of the technology of converter hot-shooting. Based on the studying of converter hot shooting at Baoshan Iron & Steel General Works, the mechanical structure and technical specification of the injecting system of hot-shooter are analyzed. The calculating method of parameters and approaches of designing are discussed.
- shooter,
- injectint system,
- converter