Investigation of Anodizing Technology for Aluminium Megnetic Films

Bai Xinde; Qiu Qinlun

doi:10.13374/j.issn1001-053x.1996.s2.013

Volume 18 Issue S2

Nov. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1996 > 18(S2): 55-58

Bai Xinde, Qiu Qinlun. Investigation of Anodizing Technology for Aluminium Megnetic Films[J]. Chinese Journal of Engineering, 1996, 18(S2): 55-58. doi: 10.13374/j.issn1001-053x.1996.s2.013

Citation:

Bai Xinde, Qiu Qinlun. Investigation of Anodizing Technology for Aluminium Megnetic Films[J]. Chinese Journal of Engineering, 1996, 18(S2): 55-58. doi: 10.13374/j.issn1001-053x.1996.s2.013

Bai Xinde, Qiu Qinlun. Investigation of Anodizing Technology for Aluminium Megnetic Films[J]. Chinese Journal of Engineering, 1996, 18(S2): 55-58. doi: 10.13374/j.issn1001-053x.1996.s2.013

Citation:

Bai Xinde, Qiu Qinlun. Investigation of Anodizing Technology for Aluminium Megnetic Films[J]. Chinese Journal of Engineering, 1996, 18(S2): 55-58. doi: 10.13374/j.issn1001-053x.1996.s2.013

PDF( 306 KB)

Investigation of Anodizing Technology for Aluminium Megnetic Films

doi: 10.13374/j.issn1001-053x.1996.s2.013

Department of Materials Science and Engineering, Tsinghua University, Beijing 100084, PRC

Received Date: 1996-01-22
Available Online: 2021-11-13

Abstract

Abstract

Anodizing technology for aluminium magnetic films were investigated. The image, size, thickness and the distribution of elements in aluminium magnetic films were analyzed by using SEM, ESCA and RBS. Also, the rectangle rations of the films were measured in our study.
- magnetic film,
- anodizing,
- perpendicular magnetic record