Mathematical Model of Solidification Heat Transfer for Single-roll Strip Continuous Casting

Han Yuwen; Zhang Xiangchun; Chou Shengtao

doi:10.13374/j.issn1001-053x.1995.03.005

Volume 17 Issue 3

Sep. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1995 > 17(3): 224-228,253

Han Yuwen, Zhang Xiangchun, Chou Shengtao. Mathematical Model of Solidification Heat Transfer for Single-roll Strip Continuous Casting[J]. Chinese Journal of Engineering, 1995, 17(3): 224-228,253. doi: 10.13374/j.issn1001-053x.1995.03.005

Citation:

Han Yuwen, Zhang Xiangchun, Chou Shengtao. Mathematical Model of Solidification Heat Transfer for Single-roll Strip Continuous Casting[J]. Chinese Journal of Engineering, 1995, 17(3): 224-228,253. doi: 10.13374/j.issn1001-053x.1995.03.005

Citation:

PDF( 452 KB)

Mathematical Model of Solidification Heat Transfer for Single-roll Strip Continuous Casting

doi: 10.13374/j.issn1001-053x.1995.03.005

1. Department of Metallurgy, USTB, Beijing 100083, PRC;
2. Central Iron & Steel Research Institute, Beijing 100081

Received Date: 1994-09-28
Available Online: 2021-09-06

Abstract

Abstract

This paper researched the single-roll strip continuous casting. The relatimi between the strip thickness and technological factors are found by way of heat transfer mathematical model and the hot-state experiments. So technological parameters for producing good quality strip are provided.
- strip continuous casting,
- heat transfer mathematical model,
- solidification