Mathematical Modelling of Three Dimensional Flowing inside a Slab Casting Mould

Huang Weitong; Yi Bingxi; Xu Baomei; Qu Ying; Lin Zongcai

doi:10.13374/j.issn1001-053x.1994.06.005

Volume 16 Issue 6

Nov. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1994 > 16(6): 527-531

Huang Weitong, Yi Bingxi, Xu Baomei, Qu Ying, Lin Zongcai. Mathematical Modelling of Three Dimensional Flowing inside a Slab Casting Mould[J]. Chinese Journal of Engineering, 1994, 16(6): 527-531. doi: 10.13374/j.issn1001-053x.1994.06.005

Citation:

Huang Weitong, Yi Bingxi, Xu Baomei, Qu Ying, Lin Zongcai. Mathematical Modelling of Three Dimensional Flowing inside a Slab Casting Mould[J]. Chinese Journal of Engineering, 1994, 16(6): 527-531. doi: 10.13374/j.issn1001-053x.1994.06.005

Citation:

PDF( 521 KB)

Mathematical Modelling of Three Dimensional Flowing inside a Slab Casting Mould

doi: 10.13374/j.issn1001-053x.1994.06.005

Department of Metallurgy, USTB. Beijing 100083, PRC

Received Date: 1993-09-12
Available Online: 2021-11-13

Abstract

Abstract

The flow phenomena inside a slab casting mould are studied in detail.The different flow phenomena influenced by the operating parameters are discussed.For these purpose,a software for numerical solution of three-dimensional flow with microcomputer was developed.The new option for the wall function and method of pressure gradient order drop was deduced in the mathematical model.By comparing the results of calculation to that of measuring by LDA,it shows that the software is available,and it can be applied to predict the flow pattern inside the mould.
- continuous casting,
- moulds,
- multiphase flow,
- mathematical model/slab,
- nozzle injection