The Analysis of the Boundary Element Method in Rolling Plate and Strip

Xia Guang; Ju Wenji

doi:10.13374/j.issn1001-053x.1989.05.024

Volume 11 Issue 5

Nov. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1989 > 11(5): 443-448

Xia Guang, Ju Wenji. The Analysis of the Boundary Element Method in Rolling Plate and Strip[J]. Chinese Journal of Engineering, 1989, 11(5): 443-448. doi: 10.13374/j.issn1001-053x.1989.05.024

Citation:

Xia Guang, Ju Wenji. The Analysis of the Boundary Element Method in Rolling Plate and Strip[J]. Chinese Journal of Engineering, 1989, 11(5): 443-448. doi: 10.13374/j.issn1001-053x.1989.05.024

Xia Guang, Ju Wenji. The Analysis of the Boundary Element Method in Rolling Plate and Strip[J]. Chinese Journal of Engineering, 1989, 11(5): 443-448. doi: 10.13374/j.issn1001-053x.1989.05.024

Citation:

Xia Guang, Ju Wenji. The Analysis of the Boundary Element Method in Rolling Plate and Strip[J]. Chinese Journal of Engineering, 1989, 11(5): 443-448. doi: 10.13374/j.issn1001-053x.1989.05.024

PDF( 405 KB)

The Analysis of the Boundary Element Method in Rolling Plate and Strip

doi: 10.13374/j.issn1001-053x.1989.05.024

Xia Guang,
Ju Wenji

Received Date: 1988-06-01
Available Online: 2021-11-15

Abstract

Abstract

In the paper, the elastoplastic boundary element method (BEM)of the initial strain is worked at calculating parameters of flat rolling of plate and strip. The calculating results obtained in studying on flat rolling of plate and strip coincide with the experimental data. The research shows that the elastoplastic BEM is satisfactory for analyzing flat rolling of plate and strip.
- BEM,
- rolling