An Analysis for Press-Shear Deformation of Metals

Zhao Yonglu; Qiao Duan

doi:10.13374/j.issn1001-053x.1987.02.018

Volume 9 Issue 2

Oct. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1987 > 9(2): 119-124

Zhao Yonglu, Qiao Duan. An Analysis for Press-Shear Deformation of Metals[J]. Chinese Journal of Engineering, 1987, 9(2): 119-124. doi: 10.13374/j.issn1001-053x.1987.02.018

Citation:

Zhao Yonglu, Qiao Duan. An Analysis for Press-Shear Deformation of Metals[J]. Chinese Journal of Engineering, 1987, 9(2): 119-124. doi: 10.13374/j.issn1001-053x.1987.02.018

Zhao Yonglu, Qiao Duan. An Analysis for Press-Shear Deformation of Metals[J]. Chinese Journal of Engineering, 1987, 9(2): 119-124. doi: 10.13374/j.issn1001-053x.1987.02.018

Citation:

Zhao Yonglu, Qiao Duan. An Analysis for Press-Shear Deformation of Metals[J]. Chinese Journal of Engineering, 1987, 9(2): 119-124. doi: 10.13374/j.issn1001-053x.1987.02.018

PDF( 452 KB)

An Analysis for Press-Shear Deformation of Metals

doi: 10.13374/j.issn1001-053x.1987.02.018

Received Date: 1986-03-04
Available Online: 2021-10-28

Abstract

Abstract

In this paper, both symmetrical press and press-shear deformation are analyzed by means of rigid plastic finite element method. The calculation results are in good agreement with experiments It shows that the press-shear deformation can lower the normal pressure on the die-specimen interface and rnake the inside deformation more homogen eous.
- finite element analysis,
- press-shear deformation,
- compression of metals