STUDY ON ANGLE OF SPRAY COOLING WATER FOR 3/8 BD3 TYPE NOZZLE

Zhang Keqiang

doi:10.13374/j.issn1001-053x.1985.04.001

Volume 7 Issue 4

Nov. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1985 > 7(4): 1-5

Zhang Keqiang. STUDY ON ANGLE OF SPRAY COOLING WATER FOR 3/8 BD3 TYPE NOZZLE[J]. Chinese Journal of Engineering, 1985, 7(4): 1-5. doi: 10.13374/j.issn1001-053x.1985.04.001

Citation:

Zhang Keqiang. STUDY ON ANGLE OF SPRAY COOLING WATER FOR 3/8 BD3 TYPE NOZZLE[J]. Chinese Journal of Engineering, 1985, 7(4): 1-5. doi: 10.13374/j.issn1001-053x.1985.04.001

Zhang Keqiang. STUDY ON ANGLE OF SPRAY COOLING WATER FOR 3/8 BD3 TYPE NOZZLE[J]. Chinese Journal of Engineering, 1985, 7(4): 1-5. doi: 10.13374/j.issn1001-053x.1985.04.001

Citation:

Zhang Keqiang. STUDY ON ANGLE OF SPRAY COOLING WATER FOR 3/8 BD3 TYPE NOZZLE[J]. Chinese Journal of Engineering, 1985, 7(4): 1-5. doi: 10.13374/j.issn1001-053x.1985.04.001

PDF( 404 KB)

STUDY ON ANGLE OF SPRAY COOLING WATER FOR 3/8 BD3 TYPE NOZZLE

doi: 10.13374/j.issn1001-053x.1985.04.001

Zhang Keqiang

Available Online: 2021-11-06

Abstract

Abstract

Spraying mechanism of cooling water using 3/8" BD3 type nozzle in continuous casting machine is investigated. Theoretical formula of the effect of the nozzle structure on angle of spray cooling water is induced. The result obtainted from the formula agree well with practical ones. Based on discussing influence of the nozzle structure on angle of spray cooling water, the method to increase volume of the cooling water is proposed.