Mining safely under a coal seam while protecting an overlying roadway

ZHOU Chao; SONG Da-zhao; LI Zhen-lei; HE Xue-qiu; ZHONG Tao-ping

doi:10.13374/j.issn2095-9389.2021.05.24.002

Volume 44 Issue 4

Apr. 2022

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2022 > 44(4): 504-515

ZHOU Chao, SONG Da-zhao, LI Zhen-lei, HE Xue-qiu, ZHONG Tao-ping. Mining safely under a coal seam while protecting an overlying roadway[J]. Chinese Journal of Engineering, 2022, 44(4): 504-515. doi: 10.13374/j.issn2095-9389.2021.05.24.002

Citation:

ZHOU Chao, SONG Da-zhao, LI Zhen-lei, HE Xue-qiu, ZHONG Tao-ping. Mining safely under a coal seam while protecting an overlying roadway[J]. Chinese Journal of Engineering, 2022, 44(4): 504-515. doi: 10.13374/j.issn2095-9389.2021.05.24.002

Citation:

PDF( 3532 KB)

Mining safely under a coal seam while protecting an overlying roadway

doi: 10.13374/j.issn2095-9389.2021.05.24.002

School of Civil and Resource Engineering, University of Science and Technology Beijing, Beijing 100083, China

More Information

Corresponding author: SONG Da-zhao, E-mail: song.dz@163.com; HE Xue-qiu, E-mail: hexq@ustb.edu.cn
Received Date: 2021-05-24
Available Online: 2021-08-12
Publish Date: 2022-04-02

Abstract

Abstract

To ensure the stability of an overlying roadway in close proximity to a 1000-m deep coal seam, this work, through theoretical analysis and numerical simulation, studies the deformation and failure mechanism, failure types, and prevention methods of the overlying roadway while mining a lower coal seam. Based on the study of mining conditions and overburdened space structures formed through mining, the deformation and failure law of the roadway in the strike and dip directions is obtained. Moreover, the stress evolution law of roadway deformation and failure is obtained by studying the influence of different mining stages and filling rates of the lower face on the mining of the overlying roadway. Results show that there are two types of potential roadway deformation and failure: (1) roadway section reduction failure and (2) roadway strike step subsidence failure. The fundamental cause of the deformation and failure of the overlying roadway is the influence of the large buried depth, strong mining stress, and unequal distance between the coal seam and roadway. The direct causes are the sudden increase in the stress of the roadway surrounding the rock and the subsidence of the key strata. In the mining process, when the mining range of the working face is more than 400 m, the roadway section reduction failure and strike ladder subsidence failure superimpose each other, inducing further roadway failure. Therefore, a scheme of partial filling and strengthening of the roadway along the working face is designed. Field measurements revealed that the above scheme can meet the stability requirements of the overlying roadway and the high efficiency and yield of the underlying working face. The results provide some references for the safe mining of coal in the 1000-m deep coal seam.
- a kilometer-deep mine,
- roadway protection,
- underlying coal seams,
- close mining,
- partial mine filling

FullText(HTML)

References(26)

References

[1]	王國法, 胡相捧, 劉新華, 等. 千米深井大采高俯采工作面四柱液壓支架適應性分析. 煤炭學報, 2020, 45(3):865 Wang G F, Hu X P, Liu X H, et al. Adaptability analysis of four-leg hydraulic support for underhand working face with large mining height of kilometer deep mine. J China Coal Soc, 2020, 45(3): 865
[2]	黃炳香, 張農, 靖洪文, 等. 深井采動巷道圍巖流變和結構失穩大變形理論. 煤炭學報, 2020, 45(3):911 Huang B X, Zhang N, Jing H W, et al. Large deformation theory of rheology and structural instability of the surrounding rock in deep mining roadway. J China Coal Soc, 2020, 45(3): 911
[3]	齊慶新, 潘一山, 舒龍勇, 等. 煤礦深部開采煤巖動力災害多尺度分源防控理論與技術架構. 煤炭學報, 2018, 43(7):1801 Qi Q X, Pan Y S, Shu L Y, et al. Theory and technical framework of prevention and control with different sources in multi-scales for coal and rock dynamic disasters in deep mining of coal mines. J China Coal Soc, 2018, 43(7): 1801
[4]	蔡美峰, 薛鼎龍, 任奮華. 金屬礦深部開采現狀與發展戰略. 工程科學學報, 2019, 41(4):417 Cai M F, Xue D L, Ren F H. Current status and development strategy of metal mines. Chin J Eng, 2019, 41(4): 417
[5]	劉峰, 曹文君, 張建明, 等. 我國煤炭工業科技創新進展及“十四五”發展方向. 煤炭學報, 2021, 46(1):1 Liu F, Cao W J, Zhang J M, et al. Current technological innovation and development direction of the 14^th Five-Year Plan period in China coal industry. J China Coal Soc, 2021, 46(1): 1
[6]	He X Q, Zhou C, Song D Z, et al. Mechanism and monitoring and early warning technology for rockburst in coal mines. Int J Miner Metall Mater, 2021, 28(7): 1097 doi: 10.1007/s12613-021-2267-5
[7]	康紅普, 范明建, 高富強, 等. 超千米深井巷道圍巖變形特征與支護技術. 巖石力學與工程學報, 2015, 34(11):2227 Kang H P, Fan M J, Gao F Q, et al. Deformation and support of rock roadway at depth more than 1 000 meters. Chin J Rock Mech Eng, 2015, 34(11): 2227
[8]	姜鵬飛, 康紅普, 王志根, 等. 千米深井軟巖大巷圍巖錨架充協同控制原理、技術及應用. 煤炭學報, 2020, 45(3):1020 Jiang P F, Kang H P, Wang Z G, et al. Principle, technology and application of soft rock roadway strata control by means of “rock bolting, U-shaped yielding steel Arches and back filling” in synergy in 1 000 m deep coal mines. J China Coal Soc, 2020, 45(3): 1020
[9]	王家臣, 王兆會, 楊杰, 等. 千米深井超長工作面采動應力旋轉特征及應用. 煤炭學報, 2020, 45(3):876 Wang J C, Wang Z H, Yang J, et al. Mining-induced stress rotation and its application in longwall face with large length in kilometer deep coal mine. J China Coal Soc, 2020, 45(3): 876
[10]	王高昂, 朱斯陶, 姜福興, 等. 千米深井大巷孤立煤體整體失穩沖擊機理及防治研究. 采礦與安全工程學報, 2019, 36(5):968 Wang G A, Zhu S T, Jiang F X, et al. Mechanism of rock burst induced by overall instability of isolated coal and its prevention in large well at thousands-kilometer underground. J Min Saf Eng, 2019, 36(5): 968
[11]	劉強, 高明忠, 王滿, 等. 千米深井采動工作面礦壓顯現規律及覆巖位移特征研究. 巖石力學與工程學報, 2019, 38(增刊1): 3070 Liu Q, Gao M Z, Wang M, et al. Study on rock pressure behavior law and overburden displacement characteristics of mining face at 1000m depth. Chin J Rock Mech Eng, 2019, 38(Suppl 1): 3070
[12]	康紅普, 王國法, 姜鵬飛, 等. 煤礦千米深井圍巖控制及智能開采技術構想. 煤炭學報, 2018, 43(7):1789 Kang H P, Wang G F, Jiang P F, et al. Conception for strata control and intelligent mining technology in deep coal mines with depth more than 1 000 m. J China Coal Soc, 2018, 43(7): 1789
[13]	張農, 陳紅, 陳瑤. 千米深井高地壓軟巖巷道沿空留巷工程案例. 煤炭學報, 2015, 40(3):494 Zhang N, Chen H, Chen Y. An engineering case of gob-side entry retaining in one kilometer-depth soft rock roadway with high ground pressure. J China Coal Soc, 2015, 40(3): 494
[14]	郭文兵, 李超. 遠距離下部煤層回采對上部采場巷道影響分析. 河南理工大學學報(自然科學版), 2018, 37(2):22 Guo W B, Li C. Analysis of the influence on the upper entries due to the lower and long distance coal seam mining. J Henan Polytech Univ Nat Sci, 2018, 37(2): 22
[15]	趙忠明, 孟武峰, 魯大華, 等. 下工作面開采對上部砌碹巷道的破壞. 煤炭學報, 2011, 36(增刊1): 23 Zhao Z M, Meng W F, Lu D H, et al. Damage of upper arch walling support roadway with lower working face mined. J China Coal Soc, 2011, 36(Suppl 1): 23
[16]	李學華, 楊宏敏, 張東升. 下伏煤層開采引起的大巷變形規律模擬研究. 煤炭學報, 2006, 31(1):1 doi: 10.3321/j.issn:0253-9993.2006.01.001 Li X H, Yang H M, Zhang D S. Simulation analysis of surrounding rock deformation law of main entry with the below seams mined. J China Coal Soc, 2006, 31(1): 1 doi: 10.3321/j.issn:0253-9993.2006.01.001
[17]	涂敏, 張向陽, 張華磊. 下保護層開采對上覆煤巷的動態影響及控制研究. 采礦與安全工程學報, 2008, 25(4):426 doi: 10.3969/j.issn.1673-3363.2008.04.010 Tu M, Zhang X Y, Zhang H L. Dynamic effect on overlying coal entry in using lower protective seam mining and its controlling measures. J Min Saf Eng, 2008, 25(4): 426 doi: 10.3969/j.issn.1673-3363.2008.04.010
[18]	張王磊, 熊祖強, 王紅巖, 等. 下保護層開采條件下上覆巷道變形規律研究. 煤炭科學技術, 2014, 42(5):9 Zhang W L, Xiong Z Q, Wang H Y, et al. Study on deformation law of overlying roadway under condition of lower protective seam mining. Coal Sci Technol, 2014, 42(5): 9
[19]	杜巖, 鄭孝婷, 謝謨文, 等. 巖爆結構面強度的弱化特征. 工程科學學報, 2018, 40(3):269 Du Y, Zheng X T, Xie M W, et al. Strength weakening characteristic of rock burst structural planes. Chin J Eng, 2018, 40(3): 269
[20]	張百勝, 楊雙鎖, 康立勛, 等. 極近距離煤層回采巷道合理位置確定方法探討. 巖石力學與工程學報, 2008, 27(1):97 doi: 10.3321/j.issn:1000-6915.2008.01.015 Zhang B S, Yang S S, Kang L X, et al. Discussion on method for determining reasonable position of roadway for ultra-close multi-seam. Chin J Rock Mech Eng, 2008, 27(1): 97 doi: 10.3321/j.issn:1000-6915.2008.01.015
[21]	Wu X Y, Jiang L S, Xu X G, et al. Numerical analysis of deformation and failure characteristics of deep roadway surrounding rock under static-dynamic coupling stress. J Cent South Univ, 2021, 28(2): 543 doi: 10.1007/s11771-021-4620-2
[22]	王雷, 王琦, 黃玉兵, 等. 深部高應力穿層巷道變形機制及支護技術研究. 采礦與安全工程學報, 2019, 36(1):112 Wang L, Wang Q, Huang Y B, et al. Study on deformation mechanism and support technology of deep cross-measure roadway under high stress. J Min Saf Eng, 2019, 36(1): 112
[23]	彭蘇萍, 凌標燦, 鄭高升, 等. 采場彎曲下沉帶內部巷道變形與巖層移動規律研究. 煤炭學報, 2002, 27(1):21 doi: 10.3321/j.issn:0253-9993.2002.01.005 Peng S P, Ling B C, Zheng G S, et al. Study on over rock moving and roadway deformation within the curve subsidence zone. J China Coal Soc, 2002, 27(1): 21 doi: 10.3321/j.issn:0253-9993.2002.01.005
[24]	錢鳴高, 石平五, 許家林. 礦山壓力與巖層控制. 徐州: 中國礦業大學出版社, 2010 Qiang M G, Shi P W, Xu J L. Mine Pressure and Rock Formation Control. Xuzhou: China University of Mining and Technology Press, 2010
[25]	許家林. 煤礦綠色開采. 徐州: 中國礦業大學出版社, 2011 Xu J L. Green Mining of Coal Mine. Xuzhou: China University of Mining and Technology Press, 2011
[26]	胡炳南, 張華興, 申寶宏. 建筑物、水體、鐵路及主要井巷煤柱留設與壓煤開采指南. 北京: 應急管理出版社, 2017 Hu B N, Zhang H X, Shen B H. Building, Water, Railway and Main Shaft and Lane Coal Pillar Retention and Coal Mining Guide. Beijing: Emergency Management Press, 2017