Mechanical properties of a photosensitive resin structure

ZHU Dong-mei; DING Feng; LIU Hai-ping; LIU Guo-yong

doi:10.13374/j.issn2095-9389.2019.04.012

Volume 41 Issue 4

Apr. 2019

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2019 > 41(4): 512-520

ZHU Dong-mei, DING Feng, LIU Hai-ping, LIU Guo-yong. Mechanical properties of a photosensitive resin structure[J]. Chinese Journal of Engineering, 2019, 41(4): 512-520. doi: 10.13374/j.issn2095-9389.2019.04.012

Citation:

ZHU Dong-mei, DING Feng, LIU Hai-ping, LIU Guo-yong. Mechanical properties of a photosensitive resin structure[J]. Chinese Journal of Engineering, 2019, 41(4): 512-520. doi: 10.13374/j.issn2095-9389.2019.04.012

Citation:

PDF( 985 KB)

Mechanical properties of a photosensitive resin structure

doi: 10.13374/j.issn2095-9389.2019.04.012

1.
School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China
2.
Beijing Inst.of Spacecraft System Eng., Beijing 100094, China
3.
Beijing Key Lab.of Intelligent Space Robotic Systems Technol.and Applications, Beijing 100094, China

More Information

Corresponding author: ZHU Dong-mei, E-mail: zdm@ustb.edu.cn
Received Date: 2018-03-06
Publish Date: 2019-04-01

Abstract

Abstract

A 3D printing photosensitive resin structure has many advantages, such as good corrosion resistance, flexibility, low yield, and superior deformability; thus, it has been widely used in several fields.In this study, a new photosensitive resin structure was designed and built using 3D printing method.The new photosensitive resin structure is mainly used as a damping element in shockabsorbing and -isolating composite structures.First, load-displacement curves were obtained by compression experiments using the universal testing machine controlled via a microcomputer, and the equivalent elastic modulus of the specific points in the structure was calculated.Dynamic loading tests were conducted using the fatigue machine.Moreover, the hysteresis loops under different frequencies between 5 Hz and 20 Hz were obtained.The equivalent damping ratio was calculated on the basis of the hysteresis loops.The static and dynamic calculation models were built on the basis of the finite element method.After the calculations, the numerical results and the test data under the same conditions were compared.The numerical results agreed well with the test data, thereby verifying the feasibility of the finite element models.Furthermore, the influences of different geometric parameters, such as slot width, inner arc, outer arc, and thickness, on the equivalent elastic modulus of the specific location and equivalent damping ratio of photosensitive resin were investigated by the finite element method.When the 3D printing photosensitive resin structure is subjected to force, it maintains a stiffness output and small deformation along the longitudinal direction; however, the lateral displacement can be enlarged.The 3D printing photosensitive resin structure has a good capability to reduce vibration and resist deformation.The results provide references for the future research of the static and dynamic characteristics and engineering application of the 3D printing photosensitive resin structure.
- 3D printing photosensitive resin,
- equivalent elastic modulus,
- test,
- finite element,
- equivalent damping ratio

FullText(HTML)

References(20)

References

[1]	Salmoria G V, Ahrens C H, Fredel M, et al.Stereolithography somos 7110 resin: mechanical behavior and fractography of parts post-cured by different methods. Polym Test, 2005, 24(2) : 157 doi: 10.1016/j.polymertesting.2004.09.008
[2]	何岷洪, 宋坤, 莫宏斌, 等.三維打印光敏樹脂的研究進展.功能高分子學報, 2015, 28(1) : 102 He M H, Song K, Mo H B, et al.Progress on photosensitive resins for 3D printing. J Funct Polym, 2015, 28(1) : 102
[3]	薛芳, 韓瀟, 孫東華.三維打印技術在航天復合材料制造中的應用.航天返回與遙感, 2015, 36(2) : 77 doi: 10.3969/j.issn.1009-8518.2015.02.011 Xue F, Han X, Sun D H.The application of 3D printing technology in space composites manufacturing.Spacecraft Recov Remot Sens, 2015, 36(2) : 77 doi: 10.3969/j.issn.1009-8518.2015.02.011
[4]	苗京.汽車工業應用樹脂的發展趨勢.時代汽車, 2017(1) : 25 doi: 10.3969/j.issn.1672-9668.2017.01.007 Miao J.Development trend of applied resin in automobile industry.Auto Time, 2017(1) : 25 doi: 10.3969/j.issn.1672-9668.2017.01.007
[5]	吳麗珍, 傅兵, 鄧昌云, 等.一種三維打印光敏樹脂的研制及性能.塑料科技, 2017, 45(6) : 54 https://www.cnki.com.cn/Article/CJFDTOTAL-SLKJ201706015.htm Wu L Z, Fu B, Deng C Y, et al.Research on preparation and properties of 3D printing photosensitive resin.Plast Sci Technol, 2017, 45(6) : 54 https://www.cnki.com.cn/Article/CJFDTOTAL-SLKJ201706015.htm
[6]	韓德寶, 宋希庚.橡膠隔振器剛度和阻尼本構關系的試驗研究.振動與沖擊, 2009, 28(1) : 156 doi: 10.3969/j.issn.1000-3835.2009.01.036 Han D B, Song X G.Experimental study on constitutive model for damping and stiffness of a rubber isolator.J Vib Shock, 2009, 28 (1) : 156 doi: 10.3969/j.issn.1000-3835.2009.01.036
[7]	楊菊, 鄭廷銀, 徐士云.雙T形內核約束屈曲支撐滯回性能分析.低溫建筑技術, 2017, 39(1) : 50 https://www.cnki.com.cn/Article/CJFDTOTAL-DRAW201701020.htm Yang J, Zheng T Y, Xu S Y.Numerical analysis of the hysteretic behavior of double-T-shape innovative buckling-restrained brace.Low Temp Architect Technol, 2017, 39(1) : 50 https://www.cnki.com.cn/Article/CJFDTOTAL-DRAW201701020.htm
[8]	路純紅, 白鴻柏.金屬橡膠復合疊層耗能器試驗研究.機械工程師, 2012(1) : 68 doi: 10.3969/j.issn.1002-2333.2012.01.027 Lu C H, Bai H B.Experimental study on metal rubber composite laminated damper.Mech Eng, 2012(1) : 68 doi: 10.3969/j.issn.1002-2333.2012.01.027
[9]	Jia F, Zhang F C.Mechanical properties of disc-spring vibration isolators based on boundary friction.J Southeast Univ, 2014, 30 (1) : 39 http://www.zhangqiaokeyan.com/academic-journal-cn_journal-southeast-university-english-edition_thesis/0201235271133.html
[10]	朱冬平, 周臻, 孔祥羽, 等.往復荷載下帶豎向阻尼器自復位墻滯回性能分析.工程力學, 2017, 34(3) : 115 https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX201703015.htm Zhu D P, Zhou Z, Kong X Y, et al.Hysteretic performance analysis of self-centering walls with vertical dampers under cyclic loads.Eng Mech, 2017, 34(3) : 115 https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX201703015.htm
[11]	Zhang C F, Zhang Z S, Zhang Q J.Static and dynamic cyclic performance of a low-yield-strength steel shear panel damper.J Constr Steel Res, 2012, 79: 195 doi: 10.1016/j.jcsr.2012.07.030
[12]	王玉璋, 潘鵬, 鄧開來, 等.高阻尼黏彈性橡膠連梁阻尼器力學性能試驗研究.建筑結構學報, 2017, 38(3) : 158 https://www.cnki.com.cn/Article/CJFDTOTAL-JZJB201703018.htm Wang Y Z, Pan P, Deng K L, et al.Experimental study on highdamping viscoelastic rubber coupling beam damper.J Build Struct, 2017, 38(3) : 158 https://www.cnki.com.cn/Article/CJFDTOTAL-JZJB201703018.htm
[13]	Amiri H A, Najafabadi E P, Estekanchi H E.Experimental and analytical study of Block Slit Damper.J Constr Steel Res, 2018, 141: 167 doi: 10.1016/j.jcsr.2017.11.006
[14]	Choi J, Abebe D Y.Hysteresis characteristics of shear panel damper using SLY120.APCBEE Procedia, 2014, 9: 370 doi: 10.1016/j.apcbee.2014.01.065
[15]	Lee C H, Kim J, Kim D H, et al.Numerical and experimental analysis of combined behavior of shear-type friction damper and non-uniform strip damper for multi-level seismic protection.Eng Struct, 2016, 114: 75 doi: 10.1016/j.engstruct.2016.02.007
[16]	鄧開來, 潘鵬.變截面軟鋼剪切阻尼器試驗研究.工程力學, 2016, 33(5) : 82 https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX201605011.htm Deng K L, Pan P.Experimental study of steel shear panel dampers with varying cross-sections.Eng Mech, 2016, 33(5) : 82 https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX201605011.htm
[17]	周云, 松本逹治, 田中和宏, 等.高阻尼黏彈性阻尼器性能與力學模型研究.振動與沖擊, 2015, 34(7) : 1 https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201507002.htm Zhou Y, Matsumoto T, Tanaka K, et al.Performance and mechanical model of high damping viscoelastic dampers.J Vib Shock, 2015, 34(7) : 1 https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201507002.htm
[18]	吳從曉, 周云, 徐昕, 等.扇形鉛黏彈性阻尼器滯回性能試驗研究.建筑結構學報, 2014, 35(4) : 199 https://www.cnki.com.cn/Article/CJFDTOTAL-JZJB201404026.htm Wu C X, Zhou Y, Xu X, et al.Experimental investigation on hysteretic performance of sector lead viscoelastic damper.J Build Struct, 2014, 35(4) : 199 https://www.cnki.com.cn/Article/CJFDTOTAL-JZJB201404026.htm
[19]	廖亞新.不同基體材料粘彈性阻尼器的試驗研究[ 學位論文].南京: 東南大學, 2015 Liao Y X.Experimental Study on Viscoelastic Damper based on Different Matrix Rubbers[Dissertation].Nanjing: Southeast University, 2015
[20]	孫德偉, 張廣玉.橡膠隔振器遲滯阻尼特性識別的新方法.振動與沖擊, 2010, 29(4) : 164 https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201004039.htm Sun D W, Zhang G Y.A new approach to identify hysteretic damping of a rubber isolator.J Vib Shock, 2010, 29(4) : 164 https://www.cnki.com.cn/Article/CJFDTOTAL-ZDCJ201004039.htm