Experiment on the strength characteristics and failure modes of granite with pre-existing cracks

GUO Qi-feng; WU Xu; CAI Mei-feng; XI Xun; REN Fen-hua; MIAO Sheng-jun

doi:10.13374/j.issn2095-9389.2019.01.004

Volume 41 Issue 1

Jan. 2019

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2019 > 41(1): 43-52

GUO Qi-feng, WU Xu, CAI Mei-feng, XI Xun, REN Fen-hua, MIAO Sheng-jun. Experiment on the strength characteristics and failure modes of granite with pre-existing cracks[J]. Chinese Journal of Engineering, 2019, 41(1): 43-52. doi: 10.13374/j.issn2095-9389.2019.01.004

Citation:

GUO Qi-feng, WU Xu, CAI Mei-feng, XI Xun, REN Fen-hua, MIAO Sheng-jun. Experiment on the strength characteristics and failure modes of granite with pre-existing cracks[J]. Chinese Journal of Engineering, 2019, 41(1): 43-52. doi: 10.13374/j.issn2095-9389.2019.01.004

Citation:

PDF( 7273 KB)

Experiment on the strength characteristics and failure modes of granite with pre-existing cracks

doi: 10.13374/j.issn2095-9389.2019.01.004

GUO Qi-feng^{1, 2
,
,},
WU Xu^{1, 2},
CAI Mei-feng^{1, 2},
XI Xun^{1, 2},
REN Fen-hua^{1, 2},
MIAO Sheng-jun^{1, 2}

1.
School of Civil and Resource Engineering, University of Science and Technology Beijing, Beijing 100083, China
2.
Key Laboratory of High-Efficient Mining and Safety of Metal Mines(Ministry of Education of China), University of Science and Technology Beijing, Beijing 100083, China

More Information

Corresponding author: GUO Qi-feng, E-mail: guoqifeng@ustb.edu.cn
Received Date: 2018-07-26
Publish Date: 2019-01-01

Abstract

Abstract

Rock masses are typically anisotropic discontinuous materials composed of joints, fractures, and interlayers. Many instability and failure cases in geotechnical engineering have been induced by the expansion and transfixion of cracks in the rock masses. The mechanical properties and fracture characteristics of joints usually determine the bearing capacities and fracture modes of rocks. As such, the investigation of the crack initiation and expansion law, strength, and deformation characteristics of fractured rock masses has great significance. In this study, the rock samples investigated were taken from deep zones in the Sanshandao gold mine, where the surrounding rock masses are fractured and the maintenance costs of deep tunnels are very high. To investigate the mechanical behaviors of fractured rock masses, uniaxial compression experiments were conducted on granite samples with pre-existing cracks. First, cracks were generated in cylindrical rock samples by a water-jet cutter. Then, the rock samples with cracks and intact samples were compressively tested using a rigid testing machine (GAW2000) to determine their strength characteristics, crack initiation rules, and failure modes. The experimental results show that the uniaxial compressive strength (UCS) values of granite samples with pre-existing cracks are lower than those of intact samples, and the extent of the UCS reduction is closely related to β, i.e., the angle between the pre-existing crack and the direction of the external load. When β is 75°, the UCS values of the samples are at their minimum, and the reduction rate reaches 84.5%. These experimental results are in good agreement with the numerical solution of the maximum distortion energy criterion. Pre-existing cracks change the failure modes of rocks. With an increase in the dip angle of a pre-existing crack, the crack initiation angle increases monotonically, and the failure mode of the rock sample changes from shear failure to tensile failure. The mechanical properties and crack initiation characteristics of real-fracture rock samples can more accurately reveal the strength characteristics and failure modes of fissured granite, and thereby provide a scientific basis for the support of fractured rock masses and geotechnical engineering design.
- granite with pre-existing cracks,
- uniaxial compression,
- strength characteristics,
- crack initiation angle,
- failure mode

FullText(HTML)

References(49)

References

[1]	王元漢, 苗雨, 李銀平. 預制裂紋巖石壓剪試驗的數值模擬分析. 巖石力學與工程學報, 2004, 23(18): 3113 doi: 10.3321/j.issn:1000-6915.2004.18.015 Wang Y H, Miao Y, Li Y P. Numerical simulation of the experiment on rock with preexisted cracks under compression and shearing. Chin J Rock Mech Eng, 2004, 23(18): 3113 doi: 10.3321/j.issn:1000-6915.2004.18.015
[2]	李銀平, 王元漢, 陳龍珠, 等. 含預制裂紋大理巖的壓剪試驗分析. 巖土工程學報, 2004, 26(1): 120 doi: 10.3321/j.issn:1000-4548.2004.01.023 Li Y P, Wang Y H, Chen L Z, et al. Experimental research on pre-existing cracks in marble under compression. Chin J Geotech Eng, 2004, 26(1): 120 doi: 10.3321/j.issn:1000-4548.2004.01.023
[3]	朱維申, 陳衛忠, 申晉. 雁形裂紋擴展的模型試驗及斷裂力學機制研究. 固體力學學報, 1998, 19(4): 355 https://www.cnki.com.cn/Article/CJFDTOTAL-GTLX804.010.htm Zhu W S, Chen W Z, Shen J. Simulation experiment and fracture mechanism study on propagation of echelon pattern cracks. Acta Mech Solid Sin, 1998, 19(4): 355 https://www.cnki.com.cn/Article/CJFDTOTAL-GTLX804.010.htm
[4]	宋選民, 顧鐵鳳, 柳崇偉. 受貫通裂隙控制巖體巷道穩定性試驗研究. 巖石力學與工程學報, 2002, 21(12): 1781 doi: 10.3321/j.issn:1000-6915.2002.12.007 Song X M, Gu T F, Liu C W. Experimental study on roadway stability in rockmass with connected fissures. Chin J Rock Mech Eng, 2002, 21(12): 1781 doi: 10.3321/j.issn:1000-6915.2002.12.007
[5]	陳衛忠, 李術才, 朱維申, 等. 巖石裂紋擴展的實驗與數值分析研究. 巖石力學與工程學報, 2003, 22(1): 18 doi: 10.3321/j.issn:1000-6915.2003.01.003 Chen W Z, Li S C, Zhu W S, et al. Experimental and numerical research on crack propagation in rock under compression. Chin J Rock Mech Eng, 2003, 22(1): 18 doi: 10.3321/j.issn:1000-6915.2003.01.003
[6]	施明明, 張友良, 譚飛. 修正應變能密度因子準則及巖石裂紋擴展研究. 巖土力學, 2013, 34(5): 1313 https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201305013.htm Shi M M, Zhang Y L, Tan F. Study of modification of strain energy density factor theory and rock crack propagation. Rock Soil Mech, 2013, 34(5): 1313 https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201305013.htm
[7]	楊圣奇, 渠濤, 韓立軍, 等. 注漿錨固裂隙砂巖破裂模式和裂紋擴展特征. 工程力學, 2010, 27(12): 156 https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX201012027.htm Yang S Q, Qu T, Han L J, et al. Failure mode and crack propagation of sandstone with pre-existing fissures under different anchorages by grouting. Eng Mech, 2010, 27(12): 156 https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX201012027.htm
[8]	Chen X, Liao Z H, Peng X. Deformability characteristics of jointed rock masses under uniaxial compression. Int J Min Sci Technol, 2012, 22(2): 213 doi: 10.1016/j.ijmst.2011.08.012
[9]	蘇海健, 靖洪文, 趙洪輝, 等. 平行裂隙群巖體強度與破裂特征的試驗研究. 工程力學, 2015, 32(5): 192 https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX201505025.htm Su H J, Jing H W, Zhao H H, et al. Strength and fracture characteristic of rock mass containing parallel fissures. Eng Mech, 2015, 32(5): 192 https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX201505025.htm
[10]	李曉紅, 盧義玉, 康勇, 等. 巖石力學實驗模擬技術. 北京: 科學出版社, 2007 Li X H, Lu Y Y, Kang Y, et al. Simulation Experiment Technique of Rock Mechanics. Beijing: Science Press, 2007
[11]	關振長, 龔振峰, 陳仁春, 等. 基于正交設計的巖質相似材料配比試驗研究. 公路交通科技, 2016, 33(9): 92 doi: 10.3969/j.issn.1002-0268.2016.09.015 Guan Z C, Gong Z F, Chen R C, et al. Experimental study on mix proportion of rock similar material based on orthogonal design. J Highway Transp Res Develop, 2016, 33(9): 92 doi: 10.3969/j.issn.1002-0268.2016.09.015
[12]	董金玉, 楊繼紅, 楊國香, 等. 基于正交設計的模型試驗相似材料的配比試驗研究. 煤炭學報, 2012, 37(1): 44 https://www.cnki.com.cn/Article/CJFDTOTAL-MTXB201201009.htm Dong J Y, Yang J H, Yang G X, et al. Research on similar material proportioning test of model test based on orthogonal design. J China Coal Soc, 2012, 37(1): 44 https://www.cnki.com.cn/Article/CJFDTOTAL-MTXB201201009.htm
[13]	陳新, 廖志紅, 李德建. 節理傾角及連通率對巖體強度、變形影響的單軸壓縮試驗研究. 巖石力學與工程學報, 2011, 30(4): 781 https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201104018.htm Chen X, Liao Z H, Li D J. Experimental study of effects of joint inclination angle and connectivity rate on strength and deformation properties of rock masses under uniaxial compression. Chin J Rock Mech Eng, 2011, 30(4): 781 https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201104018.htm
[14]	孫旭曙, 李建林, 王樂華, 等. 單一預制節理試件各向異性力學特性試驗研究. 巖土力學, 2014, 35(增刊1): 29 https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX2014S1004.htm Sun X S, Li J L, Wang L H, et al. Experimental research on anisotropic mechanical characteristic of samples with single prefabricated joint. Rock Soil Mech, 2014, 35(Suppl 1): 29 https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX2014S1004.htm
[15]	車法星, 黎立云, 劉大安. 類巖材料多裂紋體斷裂破壞試驗及有限元分析. 巖石力學與工程學報, 2000, 19(3): 295 doi: 10.3321/j.issn:1000-6915.2000.03.008 Che F X, Li L Y, Liu D A. Fracture experiments and finite element analysis for multi-cracks body of rock-like material. Chin J Rock Mech Eng, 2000, 19(3): 295 doi: 10.3321/j.issn:1000-6915.2000.03.008
[16]	蒲成志, 曹平, 趙延林, 等. 單軸壓縮下多裂隙類巖石材料強度試驗與數值分析. 巖土力學, 2010, 31(11): 3661 doi: 10.3969/j.issn.1000-7598.2010.11.050 Pu C Z, Cao P, Zhao Y L, et al. Numerical analysis and strength experiment of rock-like materials with multi-fissures under uniaxial compression. Rock Soil Mech, 2010, 31(11): 3661 doi: 10.3969/j.issn.1000-7598.2010.11.050
[17]	劉紅巖, 黃妤詩, 李楷兵, 等. 預制節理巖體試件強度及破壞模式的試驗研究. 巖土力學, 2013, 34(5): 1235 https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201305001.htm Liu H Y, Huang Y S, Li K B, et al. Test study of strength and failure mode of pre-existing jointed rock mass. Rock Soil Mech, 2013, 34(5): 1235 https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201305001.htm
[18]	張偉, 周國慶, 張海波, 等. 傾角對裂隙巖體力學特性影響試驗模擬研究. 中國礦業大學學報, 2009, 38(1): 30 doi: 10.3321/j.issn:1000-1964.2009.01.007 Zhang W, Zhou G Q, Zhang H B, et al. Experimental research on the influence of obliquity on the mechanical characteristics of a fractured rock mass. J China Univ Min Technol, 2009, 38(1): 30 doi: 10.3321/j.issn:1000-1964.2009.01.007
[19]	熊心廣, 曹平, 曹日紅. 非貫通遍布節理類巖材料單軸壓縮破碎的分形分析. 世界科技研究與發展, 2016, 38(5): 1017 https://www.cnki.com.cn/Article/CJFDTOTAL-SJKF201605019.htm Xiong X G, Cao P, Cao R H. Fractal analysis of fragments of non-penetration ubiquitous jointed rock-like specimens under uniaxial compression. World Sci-Tech R&D, 2016, 38(5): 1017 https://www.cnki.com.cn/Article/CJFDTOTAL-SJKF201605019.htm
[20]	胡盛斌, 鄧建, 馬春德, 等. 循環荷載作用下含缺陷巖石破壞特征試驗研究. 巖石力學與工程學報, 2009, 28(12): 2490 doi: 10.3321/j.issn:1000-6915.2009.12.015 Hu S B, Deng J, Ma C D, et al. Experimental study of failure characteristics of rock containing flaw under cycle loading. Chin J Rock Mech Eng, 2009, 28(12): 2490 doi: 10.3321/j.issn:1000-6915.2009.12.015
[21]	周秋景, 李同春, 宮必寧. 循環荷載作用下脆性材料剪切性能試驗研究. 巖石力學與工程學報, 2007, 26(3): 573 doi: 10.3321/j.issn:1000-6915.2007.03.019 Zhou Q J, Li T C, Gong B N. Experimental study on shear behaviors of brittle materials under cyclic loading. Chin J Rock Mech Eng, 2007, 26(3): 573 doi: 10.3321/j.issn:1000-6915.2007.03.019
[22]	鮮于文攀, 呂小波, 趙其華, 等. 不同加載條件下含預制單裂隙巖石強度和變形特性研究. 中國測試, 2017, 43(12): 124 doi: 10.11857/j.issn.1674-5124.2017.12.024 Xianyu W P, Lü X B, Zhao Q H, et al. Strength and deformation characteristics of rock with single pre-existing fissure under different loading conditions. China Meas Test, 2017, 43(12): 124 doi: 10.11857/j.issn.1674-5124.2017.12.024
[23]	韓剛, 楊帆, 劉宇, 等. 雙軸循環荷載條件下含預制裂紋類玄武巖巖橋貫通模式. 工程地質學報, 2016, 24(1): 235 https://www.cnki.com.cn/Article/CJFDTOTAL-GCDZ201602011.htm Han G, Yang F, Liu Y, et al. Rock bridge coalescence mode of basalt-like materials with two pre-existing flaws under biaxial cyclic compression. J Eng Geol, 2016, 24(1): 235 https://www.cnki.com.cn/Article/CJFDTOTAL-GCDZ201602011.htm
[24]	肖桃李, 何祥鋒, 汪宗華, 等. 單軸壓縮下單裂隙類巖石強度變形特性分析. 長江大學學報(自科版), 2018, 15(1): 64 doi: 10.3969/j.issn.1673-1409.2018.01.014 Xiao T L, He X F, Wang Z H, et al. Analysis of the strength and deformation characteristic of fissure rock under uniaxial compression. J Yangtze Univ Nat Sci Ed, 2018, 15(1): 64 doi: 10.3969/j.issn.1673-1409.2018.01.014
[25]	Li S C, Wang H P, Zhang Q Y, et al. New type geo-mechanical similar material experiments research and its application. Key Eng Mater, 2006, 326-328: 1801 doi: 10.4028/www.scientific.net/KEM.326-328.1801
[26]	劉東燕, 朱可善, 胡本雄. 含裂隙巖石受壓破壞的聲發射特性研究. 地下空間, 1998, 18(4): 210 https://www.cnki.com.cn/Article/CJFDTOTAL-BASE804.003.htm Liu D Y, Zhu K S, Hu B X. A study on acoustic emission characters of failure of fissured rock on compression. Undergr Space, 1998, 18(4): 210 https://www.cnki.com.cn/Article/CJFDTOTAL-BASE804.003.htm
[27]	白世偉, 任偉中, 豐定祥, 等. 平面應力條件下閉合斷續節理巖體破壞機理及強度特性. 巖石力學與工程學報, 1999, 18(6): 635 doi: 10.3321/j.issn:1000-6915.1999.06.004 Bai S W, Ren W Z, Feng D X, et al. Failure mechanism and strength properties of rockmass containing close intermittent joints under plane stress condition. Chin J Rock Mech Eng, 1999, 18(6): 635 doi: 10.3321/j.issn:1000-6915.1999.06.004
[28]	張波, 李術才, 楊學英, 等. 含交叉多裂隙類巖石材料單軸壓縮力學性能研究. 巖石力學與工程學報, 2015, 34(9): 1777 https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201509008.htm Zhang B, Li S C, Yang X Y, et al. Mechanical property of rock-like material with intersecting multi-flaws under uniaxial compression. Chin J Rock Mech Eng, 2015, 34(9): 1777 https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201509008.htm
[29]	張波, 李術才, 楊學英, 等. 含交叉裂隙節理巖體單軸壓縮破壞機制研究. 巖土力學, 2014, 35(7): 1863 https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201407008.htm Zhang B, Li S C, Yang X Y, et al. Uniaxial compression failure mechanism of jointed rock mass with cross-cracks. Rock Soil Mech, 2014, 35(7): 1863 https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201407008.htm
[30]	張波, 李術才, 楊學英, 等. 含交叉裂隙節理巖體錨固效應及破壞模式. 巖石力學與工程學報, 2014, 33(5): 996 https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201405015.htm Zhang B, Li S C, Yang X Y, et al. Bolting effect and failure modes of jointed rock masses with cross-cracks. Chin J Rock Mech Eng, 2014, 33(5): 996 https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX201405015.htm
[31]	張波, 李術才, 楊學英, 等. 含交叉裂隙巖體相似材料試件力學性能單軸壓縮試驗. 巖土力學, 2012, 33(12): 3674 https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201212025.htm Zhang B, Li S C, Yang X Y, et al. Uniaxial compression tests on mechanical properties of rock mass similar material with cross-cracks. Rock Soil Mech, 2012, 33(12): 3674 https://www.cnki.com.cn/Article/CJFDTOTAL-YTLX201212025.htm
[32]	陶振宇, 趙震英, 余啟華, 等. 裂隙巖體特性與洞群施工力學問題. 武漢: 中國地質大學出版社, 1993 Tao Z Y, Zhao Z Y, Yu Q H, et al. Fractured Rock Mass Characteristics and Construction Mechanics of Tunnels Group. Wuhan: China University of Geosciences Press, 1993
[33]	崔玉龍. 脆性材料中三維張開型十字交叉裂隙擴展機理的試驗研究[學位論文]. 重慶: 重慶大學, 2015 Cui Y L. The Experiment Study on the Propagation Mechanism of 3D Opening Cross-Cracks Inside Brittle Materials [Dissertation]. Chongqing: Chongqing University, 2015
[34]	黃明利, 黃凱珠. 三維表面裂紋相互作用擴展貫通機制試驗研究. 巖石力學與工程學報, 2007, 26(9): 1794 doi: 10.3321/j.issn:1000-6915.2007.09.009 Huang M L, Huang K Z. Experimental study on propagation and coalescence mechanisms of 3D surface cracks. Chin J Rock Mech Eng, 2007, 26(9): 1794 doi: 10.3321/j.issn:1000-6915.2007.09.009
[35]	付金偉, 朱維申, 雒祥宇, 等. 含三維內置斷裂面新型材料斷裂體破裂過程研究. 中南大學學報(自然科學版), 2014, 45(9): 3257 https://www.cnki.com.cn/Article/CJFDTOTAL-ZNGD201409043.htm Fu J W, Zhu W S, Luo X Y, et al. Study on failure process of fractured rock by using a new material containing three-dimensional internal fracture surfaces. J Cent South Univ Sci Technol, 2014, 45(9): 3257 https://www.cnki.com.cn/Article/CJFDTOTAL-ZNGD201409043.htm
[36]	郭彥雙, 林春金, 朱維申, 等. 三維裂隙組擴展及貫通過程的試驗研究. 巖石力學與工程學報, 2008, 27(增刊1): 3191 https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX2008S1094.htm Guo Y S, Lin C J, Zhu W S, et al. Experimental research on propagation and coalescence process of three-dimensional flaw-sets. Chin J Rock Mech Eng, 2008, 27(Suppl 1): 3191 https://www.cnki.com.cn/Article/CJFDTOTAL-YSLX2008S1094.htm
[37]	林恒星, 朱珍德, 孫亞霖, 等. 透明類巖石預制裂隙不同賦存方式起裂擴展研究. 固體力學學報, 2015, 36(專輯): 58 https://www.cnki.com.cn/Article/CJFDTOTAL-GTLX2015S1010.htm Lin H X, Zhu Z D, Sun Y L, et al. Experimental studies on pre-existing crack in different ways propagation and coalescence in transparent rock. Chin J Solid Mech, 2015, 36(Spec): 58 https://www.cnki.com.cn/Article/CJFDTOTAL-GTLX2015S1010.htm
[38]	楊圣奇, 黃彥華, 劉相如. 斷續雙裂隙巖石抗拉強度與裂紋擴展顆粒流分析. 中國礦業大學學報, 2014, 43(2): 220 https://www.cnki.com.cn/Article/CJFDTOTAL-ZGKD201402007.htm Yang S Q, Huang Y H, Liu X R. Particle flow analysis on tensile strength and crack coalescence behavior of brittle rock containing two pre-existing fissures. J China Univ Min Technol, 2014, 43(2): 220 https://www.cnki.com.cn/Article/CJFDTOTAL-ZGKD201402007.htm
[39]	楊圣奇, 溫森, 李良權. 不同圍壓下斷續預制裂紋粗晶大理巖變形和強度特性的試驗研究. 巖石力學與工程學報, 2007, 26(8): 1572 doi: 10.3321/j.issn:1000-6915.2007.08.007 Yang S Q, Wen S, Li L Q. Experimental study on deformation and strength properties of coarse marble with discontinuous pre-existing cracks under different confining pressures. Chin J Rock Mech Eng, 2007, 26(8): 1572 doi: 10.3321/j.issn:1000-6915.2007.08.007
[40]	黃凱珠, 林鵬, 唐春安, 等. 雙軸加載下斷續預置裂紋貫通機制的研究. 巖石力學與工程學報, 2002, 21(6): 808 doi: 10.3321/j.issn:1000-6915.2002.06.010 Huang K Z, Lin P, Tang C A, et al. Mechanism of crack coalescence of pre-existing flaws under biaxial compression. Chin J Rock Mech Eng, 2002, 21(6): 808 doi: 10.3321/j.issn:1000-6915.2002.06.010
[41]	楊圣奇, 戴永浩, 韓立軍, 等. 斷續預制裂隙脆性大理巖變形破壞特性單軸壓縮試驗研究. 巖石力學與工程學報, 2009, 28(12): 2391 doi: 10.3321/j.issn:1000-6915.2009.12.003 Yang S Q, Dai Y H, Han L J, et al. Uniaxial compression experimental research on deformation and failure properties of brittle marble spacemen with pre-existing fissures. Chin J Rock Mech Eng, 2009, 28(12): 2391 doi: 10.3321/j.issn:1000-6915.2009.12.003
[42]	楊圣奇, 蔣昱州, 溫森. 兩條斷續預制裂紋粗晶大理巖強度參數的研究. 工程力學, 2008, 25(12): 127 https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX200812024.htm Yang S Q, Jiang Y Z, Wen S. Study on the strength parameters of coarse marble with two pre-existing cracks. Eng Mech, 2008, 25(12): 127 https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX200812024.htm
[43]	楊圣奇, 劉相如. 不同圍壓下斷續預制裂隙大理巖擴容特性試驗研究. 巖土工程學報, 2012, 34(12): 2188 https://www.cnki.com.cn/Article/CJFDTOTAL-YTGC201212008.htm Yang S Q, Liu X R. Experimental investigation on dilatancy behavior of marble with pre-existing fissures under different confining pressures. Chin J Geotech Eng, 2012, 34(12): 2188 https://www.cnki.com.cn/Article/CJFDTOTAL-YTGC201212008.htm
[44]	蔡美峰, 何滿潮, 劉東燕. 巖石力學與工程. 北京: 科學出版社, 2002 Cai M F, He M C, Liu D Y. Rock Mechanics and Engineering. Beijing: Science Press, 2002
[45]	李世愚, 和泰名, 尹祥礎. 巖石斷裂力學導論. 合肥: 中國科學技術大學出版社, 2010 Li S Y, He T M, Yin X C. Introduction of Rock Fracture Mechanics. Hefei: Press of University of Science and Technology of China, 2010
[46]	趙詒樞. 復合型裂紋擴展的應變能準則. 固體力學學報, 1987(1): 65 https://www.cnki.com.cn/Article/CJFDTOTAL-GTLX198701008.htm Zhao Y S. A strain energy criterion for mixed mode crack propagation. Acta Mech Solid Sin, 1987(1): 65 https://www.cnki.com.cn/Article/CJFDTOTAL-GTLX198701008.htm
[47]	Erdogan F, Sih G C. On the crack extension in plates under plane loading and transverse shear. J Basic Eng, 1963, 85(4): 519 doi: 10.1115/1.3656897
[48]	林拜松. 滑開型斷裂的復合型脆斷判據. 應用數學和力學, 1985, 6(11): 977 https://www.cnki.com.cn/Article/CJFDTOTAL-YYSX198511003.htm Lin B S. The mixed mode brittle fracture criteria in sliding mode fracture. Appl Math Mech, 1985, 6(11): 977 https://www.cnki.com.cn/Article/CJFDTOTAL-YYSX198511003.htm
[49]	蔣玉川, 胡興福. 復合型裂紋擴展的最大塑性區尺度準則. 四川大學學報(工程科學版), 2005, 37(4): 11 doi: 10.3969/j.issn.1009-3087.2005.04.003 Jiang Y C, Hu X F. The fracture criterion of the maximum size of plastic zone of mixed mode crack growth. J Sichuan Univ Eng Sci Ed, 2005, 37(4): 11 doi: 10.3969/j.issn.1009-3087.2005.04.003