Research overview of macroscopic thermal contact resistance

WANG Xian-wei; WANG Zhao-liang; HE Qing; LI Xiu-lian

doi:10.13374/j.issn2095-9389.2018.10.05.001

Volume 41 Issue 10

Oct. 2019

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2019 > 41(10): 1240-1248

WANG Xian-wei, WANG Zhao-liang, HE Qing, LI Xiu-lian. Research overview of macroscopic thermal contact resistance[J]. Chinese Journal of Engineering, 2019, 41(10): 1240-1248. doi: 10.13374/j.issn2095-9389.2018.10.05.001

Citation:

WANG Xian-wei, WANG Zhao-liang, HE Qing, LI Xiu-lian. Research overview of macroscopic thermal contact resistance[J]. Chinese Journal of Engineering, 2019, 41(10): 1240-1248. doi: 10.13374/j.issn2095-9389.2018.10.05.001

Citation:

PDF( 1776 KB)

Research overview of macroscopic thermal contact resistance

doi: 10.13374/j.issn2095-9389.2018.10.05.001

WANG Xian-wei^{1)
,
,},
WANG Zhao-liang²⁾,
HE Qing¹⁾,
LI Xiu-lian¹⁾

1).
School of Mechanical Engineering, Jiangsu University of Technology, Changzhou 213001, China
2).
Institute of Plasma Physics, Chinese Academy of Sciences, Heifei 230031, China

More Information

Corresponding author: WANG Xian-wei, E-mail: wangxw@jsut.edu.cn
Received Date: 2018-10-05
Publish Date: 2019-10-01

Abstract

Abstract

Given the limitations of manufacturing precision, manufacturing cost, and other factors, contact clearance is always inevitable at the contact interface of components. The contact clearance leads to the reduction of heat flux during the heat transfer process. The effect of thermal contact resistance is significant, particularly in the fields of aerospace, microelectrical technology, and cryogenic superconductor that are closely related to the operating temperature. The thermal contact resistance is affected by many factors, such as size, shape, space of asperity, mechanical properties of the material, external pressure, and temperature. Moreover, these factors usually interact with each other and need to be coupled. Thus, how to describe the thermal contact resistance accurately and build the appropriate prediction model are the key problems that should be resolved during engineering calculations. On the basis of the research results of domestic and international scholars, the current research state of thermal contact resistance during theoretical calculations and engineering applications were presented. The theoretical calculation, experimental measurement, and digital simulation methods used to analyze macroscopic thermal contact resistance were summarized, and the advantages and disadvantages of these methods were indicated. The effects of different factors on macroscopic thermal contact resistance were briefly discussed. On the basis of the combined cooling experiments of low-temperature superconducting magnet coils of the China Fusion Engineering Test Reactor, the effects of heat flow direction, temperature, and pressure on the thermal contact resistance of superconducting magnet components, such as stainless-steel jacket, dielectric insulation material, and quench protection material, were analyzed. Moreover, the reason why the effects of temperature and external pressure result in the change of thermal contact resistance was investigated from the perspective of thermal mechanics. Finally, given the accuracy and convenience requirements for the calculation of thermal contact resistance during engineering practice, the future research direction was indicated.
- thermal contact resistance,
- thermal contact conductance,
- asperity,
- roughness,
- heat flux

FullText(HTML)

References(71)

References

[1]	Lambert M A, Fletcher L S. Thermal contact conductance of spherical rough metals. J Heat Transfer, 1997, 119(4): 684 doi: 10.1115/1.2824172
[2]	Adrian Bejan, Allan D K. Heat Transfer Handbook. New Jersey: Wiley, 2003
[3]	宋成軼, 欒添, 鄔劍波, 等. 聚合物基熱界面材料界面接觸熱阻的研究進展. 集成技術, 2019, 8(1): 56 https://www.cnki.com.cn/Article/CJFDTOTAL-JCJI201901007.htm Song C Y, Luan T, Wu J B, et al. Research progress on the interface thermal resistance of polymer based thermal interface materials. J Integr Technol, 2019, 8(1): 56 https://www.cnki.com.cn/Article/CJFDTOTAL-JCJI201901007.htm
[4]	Dter Haar. Collected Papers of P. L. Kapitza. London: Pergamon Press, 1965
[5]	Thomas T R, Probert S D. Correlations for thermal contact conductance in vacuo. J Heat Transfer, 1972, 94(3): 276 doi: 10.1115/1.3449928
[6]	Swartz E T, Pohl R O. Thermal boundary resistance. Rev Mod Phys, 1989, 61(3): 605 doi: 10.1103/RevModPhys.61.605
[7]	Hmina N, Scudeller Y. Thermal interface resistance and subsurface effusivity of submicron metallic films on dielectric substrates: an experimental method for simultaneous determination. Int J Heat Mass Transfer, 1998, 41(18): 2781 doi: 10.1016/S0017-9310(98)00363-9
[8]	Rostami A A, Hassan A Y, Lim P C. Parametric study of thermal constriction resistance. Heat Mass Transfer, 2001, 37(1): 5 doi: 10.1007/s002310000087
[9]	Yovanovich M M. Four decades of research on thermal contact, gap, and joint resistance in microelectronics. IEEE Trans Compon Packag Technol, 2005, 28(2): 182 doi: 10.1109/TCAPT.2005.848483
[10]	Prasher R. Thermal boundary resistance and thermal conductivity of multiwalled carbon nanotubes. Phys Rev B, 2008, 77(7): 075424 doi: 10.1103/PhysRevB.77.075424
[11]	Lambert M A, Fletcher L S. Review of models for thermal contact conductance of metals. J Thermophys Heat Transfer, 1997, 11(2): 129 doi: 10.2514/2.6221
[12]	Lambert M A, Fletcher L S. Thermal contact conductance of non-flat, rough, metallic coated metals. J Heat Transfer, 2002, 124(3): 405 doi: 10.1115/1.1464565
[13]	Fletcher L S. A review of thermal enhancement techniques for electronic systems. IEEE Trans Comp Hybrids Mfg, 1990, 13(4): 1012 doi: 10.1109/33.62543
[14]	Kraus A D, Bar-Cohen A. Thermal Analysis & Control of Electronic Equipment. Florida: McGraw-Hill, 1983
[15]	Madhusudana C V, Fletcher L S. Contact heat transfer-the last decade. AIAA J, 1986, 24(3): 510 doi: 10.2514/3.9298
[16]	Fletcher L S. Recent developments in contact conductance heat transfer. J Heat Transfer, 1988, 110(4B): 1059 doi: 10.1115/1.3250610
[17]	Gmelin E, Asen-Palmer M, Reuther M, et al. Thermal boundary resistance of mechanical contacts between solids at sub-ambient temperatures. J Phys D Appl Phys, 1999, 32(6): R19 doi: 10.1088/0022-3727/32/6/004
[18]	顧慰蘭. 接觸熱阻的試驗研究. 南京航空學院學報, 1992, 24(1): 46 https://www.cnki.com.cn/Article/CJFDTOTAL-HKXB201011013.htm Gu W L. Experiment on thermal contact resistance. J Nanjing Aeron Inst, 1992, 24(1): 46 https://www.cnki.com.cn/Article/CJFDTOTAL-HKXB201011013.htm
[19]	顧慰蘭, 楊燕生. 溫度對接觸熱阻的影響. 南京航空航天大學學報, 1994, 26(3): 342 https://www.cnki.com.cn/Article/CJFDTOTAL-NJHK403.006.htm Gu W L, Yang Y S. The influence of temperature on contact resistance of metallic surfaces temperature. J Nanjing Univ Aeron Astron, 1994, 26(3): 342 https://www.cnki.com.cn/Article/CJFDTOTAL-NJHK403.006.htm
[20]	徐烈, 楊軍, 徐佳梅, 等. 低溫下固體表面接觸熱阻的研究. 低溫與超導, 1996, 24(1): 53 https://www.cnki.com.cn/Article/CJFDTOTAL-DWYC601.012.htm Xu L, Yang J, Xu J M, et al. The research of contact thermal resistance of solid surface at low temperature. Cryog Supercond, 1996, 24(1): 53 https://www.cnki.com.cn/Article/CJFDTOTAL-DWYC601.012.htm
[21]	徐烈, 張濤, 熊煒, 等. 真空低溫下接觸表面對接觸熱阻的影響. 真空與低溫, 1998, 4(1): 1 https://www.cnki.com.cn/Article/CJFDTOTAL-ZKDW801.000.htm Xu L, Zhang T, Xiong W, et al. The effect of contact interfaces on thermal contact resistance at low temperature and vacuum. Vac Cryog, 1998, 4(1): 1 https://www.cnki.com.cn/Article/CJFDTOTAL-ZKDW801.000.htm
[22]	Xu R P, Feng H D, Zhao L P, et al. Experimental investigation of thermal contact conductance at low temperature based on fractal description. Int Commun Heat Mass Transfer, 2006, 33(7): 811 doi: 10.1016/j.icheatmasstransfer.2006.02.023
[23]	陳進. 低溫固體界面傳熱過程計算機仿真研究[學位論文]. 武漢: 華中科技大學, 2004 Chen J. Investigation on the Computer Simulation of Boundary Heat Transfer Process between Solids at Low Temperature[Dissertation]. Wuhan: Huazhong University of Science and Technology, 2004
[24]	應濟, 陳偉球, 陳子辰. 換熱影響下的接觸熱阻估計. 浙江大學學報: 自然科學版, 1996, 30(4): 415 https://www.cnki.com.cn/Article/CJFDTOTAL-ZDZC604.010.htm Ying J, Chen W Q, Chen Z C. Effect of heat transfer on the estimation of contact resistance. J Zhejiang Univ Nat Sci, 1996, 30(4): 415 https://www.cnki.com.cn/Article/CJFDTOTAL-ZDZC604.010.htm
[25]	應濟, 賈昱, 陳子辰, 等. 粗糙表面接觸熱阻的理論和實驗研究. 浙江大學學報: 自然科學版, 1997, 31(1): 104 https://www.cnki.com.cn/Article/CJFDTOTAL-ZDZC701.014.htm Ying J, Jia Y, Chen Z C, et al. Theoretical and experimental research on the contact thermal resistance between real surface. J Zhejiang Univ Nat Sci, 1997, 31(1): 104 https://www.cnki.com.cn/Article/CJFDTOTAL-ZDZC701.014.htm
[26]	韓玉閣, 宣益民, 湯瑞峰. 摩擦接觸界面傳熱規律研究. 南京理工大學學報, 1998, 22(3): 260 https://www.cnki.com.cn/Article/CJFDTOTAL-NJLG803.017.htm Han Y G, Xuan Y M, Tang T F. Heat transfer on the contact surfaces with frictional heating. J Nanjing Univ Sci Technol, 1998, 22(3): 260 https://www.cnki.com.cn/Article/CJFDTOTAL-NJLG803.017.htm
[27]	林潘忠, 孫蓓蓓, 趙天. 基于接觸熱阻模型的筆記本電腦散熱性能分析與優化. 東南大學學報: 自然科學版, 2014, 44(1): 93 https://www.cnki.com.cn/Article/CJFDTOTAL-DNDX201401018.htm Lin P Z, Sun B B, Zhao T. Thermal analysis and optimization of notebook computer based on thermal contact resistance. J Southeast Univ Nat Sci Ed, 2014, 44(1): 93 https://www.cnki.com.cn/Article/CJFDTOTAL-DNDX201401018.htm
[28]	葛銘, 趙利杰, 舒少辛, 等. 接觸熱阻對雙H型鰭片管傳熱系數的影響. 中國電力, 2017, 50(2): 57 doi: 10.3969/j.issn.1007-3361.2017.02.015 Ge M, Zhao L J, Shu S X, et al. Impact of thermal contact resistance on heat transfer coefficient of double H-type finned tubes. Electric Power, 2017, 50(2): 57 doi: 10.3969/j.issn.1007-3361.2017.02.015
[29]	劉志峰, 馬澄宇, 趙永勝, 等. 基于接觸熱阻的高速精密電主軸熱特性分析. 北京工業大學學報, 2016, 42(1): 17 https://www.cnki.com.cn/Article/CJFDTOTAL-BJGD201601004.htm Liu Z F, Ma C Y, Zhao Y S, et al. Analysis of high speed motorized spindle thermal characteristics based on thermal contact resistance. J Beijing Univ Technol, 2016, 42(1): 17 https://www.cnki.com.cn/Article/CJFDTOTAL-BJGD201601004.htm
[30]	曹濤鋒, 母玉同, 丁靖, 等. 接觸熱阻對燃料電池溫度分布影響的數值模擬. 工程熱物理學報, 2016, 36(12): 2661 https://www.cnki.com.cn/Article/CJFDTOTAL-GCRB201512026.htm Cao T F, Mu Y T, Ding J, et al. Numerical investigation the temperature distribution of PEM fuel cell with the effect of thermal contact resistance. J Eng Thermophys, 2015, 36(12): 2661 https://www.cnki.com.cn/Article/CJFDTOTAL-GCRB201512026.htm
[31]	Gibson R D. The contact resistance for a semi-infinite cylinder in a vacuum. Appl Energy, 1976, 2(1): 57 doi: 10.1016/0306-2619(76)90039-8
[32]	Fenech H, Rohsenow W M. Prediction of thermal conductance of metallic surfaces in contact. J Heat Transfer, 1963, 85(1): 15 doi: 10.1115/1.3686003
[33]	Cooper M G, Mikic B B, Yovanovich M M. Thermal contact conductance. Int J Heat Mass Transfer, 1969, 12(3): 279 doi: 10.1016/0017-9310(69)90011-8
[34]	Bahrami M. Modeling of Thermal Joint Resistance for Sphere-Flat Contacts in a Vacuum[Dissertation]. Ontario: University of Waterloo, 2004
[35]	Bahrami M, Yovanovich M M, Culham J R. A compact model for spherical rough contacts. J Tribol, 2005, 127(4): 884 doi: 10.1115/1.2000982
[36]	Willimams A. Major S. The solution of a steady state conduction heat transfer problem using and electrolytic tank analogue. Mechanical Eng Trans, 1977, ME2: 7 http://www.researchgate.net/publication/297499040_SOLUTION_OF_A_STEADY_CONDUCTION_HEAT_TRANSFER_PROBLEM_USING_AN_ELECTROLYTIC_TANK_ANALOGUE
[37]	Yovanovich M M. Thermal constriction resistance of contacts on a half-space: Integral formulation//AIAA 10th Thermophysics Conference. Denver, 1975: 397
[38]	Gibson R D. The contact resistance for a semi-infinite cylinder in a vacuum. Appl Energy, 1976, 2(1): 57 doi: 10.1016/0306-2619(76)90039-8
[39]	Greenwood J A, Williamson J B P. Contact of nominally flat surfaces. Proc R Soc London Ser A, 1966, 295(1442): 300 doi: 10.1098/rspa.1966.0242
[40]	Yovanovich M M. Overall constriction resistance between contacting rough, wavy surfaces. Int J Heat Mass Transfer, 1969, 12(11): 1517 doi: 10.1016/0017-9310(69)90031-3
[41]	Bürde S S, Yovanovich M M. Thermal resistance at smooth-sphere/rough-flat contacts: Theoretical analysis//2nd AIAA/ASME Thermophysics and Heat Transfer Conference. Palo Alto, 1978: 83
[42]	Shai I, Santo M. Heat transfer with contact resistance. Int J Heat Mass Transfer, 1982, 25(4): 465 doi: 10.1016/0017-9310(82)90050-3
[43]	Williams A. Heat flow through single point of metallic contacts of simple shapes. AIAA/ASME Thermo-physics and Heat Transfer Conference. Boston, 1974: 1
[44]	Zahouani H, Vargiolu R, Loubet J L. Fractal models of surface topography and contact mechanics. Math Comput Modell, 1998, 28(4-8): 517 doi: 10.1016/S0895-7177(98)00139-3
[45]	Xu R P, Feng H D, Zhao L P, et al. Experimental investigation of thermal contact conductance at low temperature based on fractal description. Int Commun Heat Mass Transfer, 2006, 33(7): 811 doi: 10.1016/j.icheatmasstransfer.2006.02.023
[46]	王安良, 趙劍鋒. 接觸熱阻預測的研究綜述. 中國科學: 技術科學, 2011, 41(5): 545 https://www.cnki.com.cn/Article/CJFDTOTAL-JEXK201105003.htm Wang A L, Zhao J F. Review of prediction for thermal contact resistance. Sci China Technol Sci, 2011, 41(5): 545 https://www.cnki.com.cn/Article/CJFDTOTAL-JEXK201105003.htm
[47]	王安良, 吳玉庭, 楊春信. 沸騰表面凹坑的尺度分布特征. 熱能動力工程, 2003, 18(3): 291 doi: 10.3969/j.issn.1001-2060.2003.03.020 Wang A L, Wu Y T, Yang C X. Size distribution characteristics of cavities on a pool boiling surface. J Eng Therm Energy Power, 2003, 18(3): 291 doi: 10.3969/j.issn.1001-2060.2003.03.020
[48]	Singhal V, Garimella S V. Prediction of Thermal Contact Conductance by Surface Deformation Analysis//International Mechanical Engineering Congress and Exposition. New York, 2000: 43
[49]	徐烈, 張濤, 趙蘭萍, 等. 雙熱流法測定低溫真空下固體界面的接觸熱阻. 低溫工程, 1999(4): 185 doi: 10.3969/j.issn.1000-6516.1999.04.038 Xu L, Zhang T, Zhao L P, et al. Using double heat flux meter method to measure the thermal contact resistance of solid material at low temperature and vacuum. Cryogenics, 1999(4): 185 doi: 10.3969/j.issn.1000-6516.1999.04.038
[50]	Fieberg C, Kneer R. Determination of thermal contact resistance from transient temperature measurements. Int J Heat Mass Transfer, 2008, 51(5-6): 1017 doi: 10.1016/j.ijheatmasstransfer.2007.05.004
[51]	Cong P Z, Zhang X, Fujii M. Estimation of thermal contact resistance using ultrasonic waves. Int J Thermophys, 2006, 27(1): 171 doi: 10.1007/s10765-006-0037-2
[52]	石零. 低溫固-固接觸界面熱傳輸研究[學位論文]. 武漢: 華中科技大學, 2006 Shi L. Investigation of Heat Transport on the Solid-Solid Contact Interface at Low Temperature [Dissertation]. Wuhan: Huazhong University of Science and Technology, 2006
[53]	張平, 宣益民, 李強. 界面接觸熱阻的研究進展. 化工學報, 2012, 63(2): 335 doi: 10.3969/j.issn.0438-1157.2012.02.001 Zhang P, Xuan Y M, Li Q. Development on thermal contact resistance. CIESC J, 2012, 63(2): 335 doi: 10.3969/j.issn.0438-1157.2012.02.001
[54]	陸敏恂, 南國騰, 周愛國. 基于ANSYS的接觸熱阻的有限元分析. 流體傳動與控制, 2013(6): 34 doi: 10.3969/j.issn.1672-8904.2013.06.009 Lu M X, Nan G T, Zhou A G. Finite element analysis of thermal contact resistance based on ANSYS. Fluid Power Trans Control, 2013(6): 34 doi: 10.3969/j.issn.1672-8904.2013.06.009
[55]	劉冬歡, 王飛, 曾凡文, 等. 高溫接觸熱阻的有限元模擬方法. 工程力學, 2012, 29(9): 375 https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX201209055.htm Liu D H, Wang F, Zeng F W, et al. Finite element simulation method of high temperature thermal contact resistance. Eng Mech, 2012, 29(9): 375 https://www.cnki.com.cn/Article/CJFDTOTAL-GCLX201209055.htm
[56]	余遠鋒, 李澤衛, 鄭曉亞. 粗糙表面之間接觸熱阻反問題研究. 力學學報, 2018, 50(3): 479 https://www.cnki.com.cn/Article/CJFDTOTAL-LXXB201803004.htm Yu Y F, Li Z W, Zheng X Y. The inverse problem of thermal contact resistance between rough surfaces. Chin J Theor Appl Mech, 2018, 50(3): 479 https://www.cnki.com.cn/Article/CJFDTOTAL-LXXB201803004.htm
[57]	楊華威, 袁廣江, 肖劉. ANSYS接觸單元在接觸熱阻仿真中的應用. 微波學報, 2012(增刊2): 241 https://www.cnki.com.cn/Article/CJFDTOTAL-WBXB2012S2069.htm Yang H W, Yuan G J, Xiao L. Application of ANSYS contact element in simulation of thermal contact resistance. J Microwaves, 2012(Suppl 2): 241 https://www.cnki.com.cn/Article/CJFDTOTAL-WBXB2012S2069.htm
[58]	楊華威, 袁廣江, 肖劉, 等. 使用ANSYS接觸單元模擬研究行波管收集極的接觸熱阻. 真空科學與技術學報, 2013, 33(6): 517 doi: 10.3969/j.issn.1672-7126.2013.06.03 Yang H W, Yuan G J, Xiao L, et al. Simulation of thermal contact resistance in collector of traveling wave tube. Chin J Vac Sci Technol, 2013, 33(6): 517 doi: 10.3969/j.issn.1672-7126.2013.06.03
[59]	曹駿, 胡佩俊, 應濟. 基于接觸熱阻的主軸熱特性有限元分析. 機電工程, 2008, 25(2): 20 doi: 10.3969/j.issn.1001-4551.2008.02.007 Cao J, Hu P J, Ying J. Finite element analysis of spindle thermal character based on thermal contact resistance. Mech Electr Eng Mag, 2008, 25(2): 20 doi: 10.3969/j.issn.1001-4551.2008.02.007
[60]	湛利華, 李曉謙, 胡仕成. 界面接觸熱阻影響因素的實驗研究. 輕合金加工技術, 2002, 30(9): 40 doi: 10.3969/j.issn.1007-7235.2002.09.014 Zhan L H, Li X Q, Hu S C. Experiment research for the interfacial thermal contact resistance. Light Alloy Fabric Technol, 2002, 30(9): 40 doi: 10.3969/j.issn.1007-7235.2002.09.014
[61]	王向往, 胡芃, 劉陽. 界面熱阻實驗裝置與碳纖維增強板膠接熱阻研究. 中國科學技術大學學報, 2018, 48(7): 600 doi: 10.3969/j.issn.0253-2778.2018.07.010 Wang X W, Hu P, Liu Y. Study on experimental device and measurements for interface thermal resistance of adhesive structure of CFRP. J Univ Sci Technol China, 2018, 48(7): 600 doi: 10.3969/j.issn.0253-2778.2018.07.010
[62]	李俊南, 張鎖懷, 呂超穎, 等. 分布式拉桿轉子輪盤結合面接觸熱阻建模與分析. 汽輪機技術, 2018, 60(4): 267 doi: 10.3969/j.issn.1001-5884.2018.04.008 Li J N, Zhang S H, Lü C Y, et al. Modeling and analysis of thermal contact resistance on joint interfaces of distributed rod fastening rotor. Turbine Technol, 2018, 60(4): 267 doi: 10.3969/j.issn.1001-5884.2018.04.008
[63]	蔣禮, 蔣炳炎, 吳旺青, 等. 薄壁注射成型中聚合物與模具間接觸熱阻研究. 中南大學學報(自然科學版), 2018, 49(6): 1381 https://www.cnki.com.cn/Article/CJFDTOTAL-ZNGD201806010.htm Jiang L, Jiang B Y, Wu W Q, et al. Research on thermal contact resistance between polymer and mold during thin-wall injection molding. J Cent South Univ Sci Technol, 2018, 49(6): 1381 https://www.cnki.com.cn/Article/CJFDTOTAL-ZNGD201806010.htm
[64]	胡翼, 王超, 徐峰祥, 等. 硼鋼板熱沖壓成形過程接觸熱阻研究. 鍛壓技術, 2018, 43(7): 147 https://www.cnki.com.cn/Article/CJFDTOTAL-DYJE201807020.htm Hu Y, Wang C, Xu F X, et al. Research on thermal contact resistance for boron steel sheet in hot stamping process. Forg Stamp Technol, 2018, 43(7): 147 https://www.cnki.com.cn/Article/CJFDTOTAL-DYJE201807020.htm
[65]	王存洪, 周軍, 張興義. 低溫下固體接觸熱阻與接觸電阻的實驗研究. 低溫與超導, 2018, 46(3): 1 https://www.cnki.com.cn/Article/CJFDTOTAL-DWYC201803001.htm Wang C H, Zhou J, Zhang X Y. The research on thermal contact resistance and contact resistance of solid at low temperature. Cryog Supercond, 2018, 46(3): 1 https://www.cnki.com.cn/Article/CJFDTOTAL-DWYC201803001.htm
[66]	Johnson K L. Contact Mechanics. Cambridge: Cambridge University Press, 1987
[67]	Sridgar M R, Yovanovich M M. Elastoplastic Constriction Resistance of Sphere/flat Contacts. J Heat Trans., 1996, 118(1): 202 doi: 10.1115/1.2824037
[68]	Roca R T, Mikic R E. Thermal Contact Resistance in a Non-ideal Joint. Massachusetts: Massachusetts Institute of Technology, 1971
[69]	Albin K J, Hasselstrom U, Nileeon E. Thermal Contact Conductance in a Bolted Joint[Dissertation]. Gothenburg: Chalmers University of Technology, 2012
[70]	Bevans J T, Ishimoto T, Loya B R, et al. Prediction of Space Vehiclet Thermal Characteristics. Ohio: Air Force Flight Dynamics Laboratory, 1965
[71]	Abadi P P S S, Leong C K, Chung D D L. Factors that govern the performance of thermal interface materials. J Electron Mater, 2009, 38(1): 175 doi: 10.1007/s11664-008-0563-8