Hydration characteristics of red-mud based paste-like backfill material

CHEN Jiao-long; ZHANG Na; LI Heng; ZHAO Xi-bin; LIU Xiao-ming

doi:10.13374/j.issn2095-9389.2017.11.005

Volume 39 Issue 11

Nov. 2017

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2017 > 39(11): 1640-1646

CHEN Jiao-long, ZHANG Na, LI Heng, ZHAO Xi-bin, LIU Xiao-ming. Hydration characteristics of red-mud based paste-like backfill material[J]. Chinese Journal of Engineering, 2017, 39(11): 1640-1646. doi: 10.13374/j.issn2095-9389.2017.11.005

Citation:

CHEN Jiao-long, ZHANG Na, LI Heng, ZHAO Xi-bin, LIU Xiao-ming. Hydration characteristics of red-mud based paste-like backfill material[J]. Chinese Journal of Engineering, 2017, 39(11): 1640-1646. doi: 10.13374/j.issn2095-9389.2017.11.005

Citation:

PDF( 773 KB)

Hydration characteristics of red-mud based paste-like backfill material

doi: 10.13374/j.issn2095-9389.2017.11.005

1) School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China
2) School of Materials Science and Technology, China University of Geosciences, Beijing 100083, China

Received Date: 2017-06-21

Abstract

Abstract

Preparation of red-mud based paste-like backfill material using red mud, coal gangue, and other industrial solid wastes was accounted. In order to understand the hydration characteristics of red-mud based paste-like backfill material, X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric-differential scanning calorimetry, and scanning electron microscope-energydispersive X-ray spectroscopy techniques were used to investigate the hydration products of the hardened paste, which was formed after hydration of raw materials. The results show that the most optimized proportion is the number E03 experiment, in which the mass ratio of cementing material, red mud, coal gangue, and additive agent is 1:16:5:11, the solid mass fraction is 70%, and the uniaxial compressive strength after 28 days is 5.49 MPa. The hydration products of red-mud based paste-like backfill material are mainly gismondine (CaAl₂ Si₂O₈·4H₂O) and ettringite (AFt). As the hydration reaction proceeds, the quantity of hydration products increases significantly. Needle-shaped ettringite forms during the early hydration period and gradually transforms into rod-shaped ettringite; this transformation is helpful in the strength development of the red-mud based paste-like backfill material.
- red-mud,
- paste-like backfill material,
- hydration products,
- microstructure

FullText(HTML)

References(7)

References

[3]	Lu R R, Zhang Y H, Zhou F S, et al. Research of leaching alumina and iron oxide from Bayer red mud. Appl Mech Mater, 2012, 151:355
[5]	Agatzini-Leonardou S, Oustadakis P, Tsakiridis P E, et al. Titanium leaching from red mud by diluted sulfuric acid at atmospheric pressure. J Hazard Mater, 2008, 157(2-3):579
[8]	Zhang N, Li H X, Liu X M. Hydration mechanism and leaching behavior of bauxite-calcination-method red mud-coal gangue based cementitious materials. J Hazard Mater, 2016, 314:172
[9]	Liu X M, Zhang N, Yao Y, et al. Micro-structural characterization of the hydration products of bauxite-calcination-method red mud-coal gangue based cementitious materials. J Hazard Mater, 2013, 262:428
[13]	Fall M, Celestin J C, Pokharel M, et al. A contribution to understanding the effects of curing temperature on the mechanical properties of mine cemented tailings backfill. Eng Geol, 2010, 114(3-4):397
[21]	Yin S H, Wu A X, Hu K J, et al. The effect of solid components on the rheological and mechanical properties of cemented paste backfill. Miner Eng, 2012, 35:61
[22]	Koohestani B, Koubaa A, Belem T, et al. Experimental investigation of mechanical and microstructural properties of cemented paste backfill containing maple-wood filler. Construction Building Mater, 2016, 121:222