Effect of manganese sulphide on the precipitation behavior of antimony in steel

YANG Peng-peng; SONG Bo; MAO Jing-hong; SU Bu-xin; ZHANG Ping

doi:10.13374/j.issn1001-053x.2013.02.015

Volume 35 Issue 2

Jul. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2013 > 35(2): 177-183

YANG Peng-peng, SONG Bo, MAO Jing-hong, SU Bu-xin, ZHANG Ping. Effect of manganese sulphide on the precipitation behavior of antimony in steel[J]. Chinese Journal of Engineering, 2013, 35(2): 177-183. doi: 10.13374/j.issn1001-053x.2013.02.015

Citation:

YANG Peng-peng, SONG Bo, MAO Jing-hong, SU Bu-xin, ZHANG Ping. Effect of manganese sulphide on the precipitation behavior of antimony in steel[J]. Chinese Journal of Engineering, 2013, 35(2): 177-183. doi: 10.13374/j.issn1001-053x.2013.02.015

Citation:

PDF( 1527 KB)

Effect of manganese sulphide on the precipitation behavior of antimony in steel

doi: 10.13374/j.issn1001-053x.2013.02.015

YANG Peng-peng^1,2,
SONG Bo^{1,2
,
,},
MAO Jing-hong³,
SU Bu-xin^1,2,
ZHANG Ping^1,2

1. State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083, China;
2. School of Motallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China;
3. School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China

Received Date: 2011-12-15

Abstract

Abstract

The effects of different inclusions on antimony precipitation and enrichment in steel during high-temperature oxidation were investigated. It is found that in the Fe-1.5%Sb alloy specimen, antimony-enriched phases precipitate at grain boundaries after water-quenching at 1100℃. Manganese sulfide is more favorable for antimony precipitation than oxide inclusions. The chemical composition of antimony-enriched phases is close to that of FeSb, which is consistent with the result calculated by the disregistry of lattice parameters between antimony particles and the inclusions. Reducing the oxygen content or adding Ti in steel can increase the amount of manganese sulfide and promote antimony precipitation, thereby decrease the amount of antimony segregation and solid solution, and change the precipitation location of Sb in steel.
- steelmaking,
- inclusions,
- manganese sulfide,
- antimony,
- precipitation