Improvement in quality and quantity indices of sinter with high proportion of limonite

WANG Yue-fei; WU Sheng-li; HAN Hong-liang

doi:10.13374/j.issn1001-053x.2010.03.004

Volume 32 Issue 3

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2010 > 32(3): 292-297

WANG Yue-fei, WU Sheng-li, HAN Hong-liang. Improvement in quality and quantity indices of sinter with high proportion of limonite[J]. Chinese Journal of Engineering, 2010, 32(3): 292-297. doi: 10.13374/j.issn1001-053x.2010.03.004

Citation:

WANG Yue-fei, WU Sheng-li, HAN Hong-liang. Improvement in quality and quantity indices of sinter with high proportion of limonite[J]. Chinese Journal of Engineering, 2010, 32(3): 292-297. doi: 10.13374/j.issn1001-053x.2010.03.004

Citation:

PDF( 417 KB)

Improvement in quality and quantity indices of sinter with high proportion of limonite

doi: 10.13374/j.issn1001-053x.2010.03.004

1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China;
2. Ironmaking Plant of Baosteel Branch, Baoshan Iron&Steel Co., Ltd., Shanghai 201900, China

Received Date: 2009-09-29

Abstract

Abstract

In order to improve the quality and quantity indices of sinter with high proportion of limonite,the influence of factors such as binary basicity and calcareous flux on the quantity,strength and type of bonding phase as well as the quality and quantity indices of sinter were studied through micro-sintering test and sintering pot test based on the characteristics of blending ores for sintering.The experiment results show that the quality and quantity indices of sinter with high proportion of limonite can be improved through the following measures:the binary basicity of sinter increases to 2.0,the proportion of quicklime increases in a certain range,and the sintering negative pressure and the depth of the sintering bed increase properly.
- limonite,
- sintering,
- basicity,
- blending method