Evaluation on liquid phase fluidity of iron ore in sintering

WU Shengli; PEI Yuandong; CHEN Hui; PENG Peng; YANG Fan

doi:10.13374/j.issn1001-053x.2008.10.012

Volume 30 Issue 10

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2008 > 30(10): 1095-1100

WU Shengli, PEI Yuandong, CHEN Hui, PENG Peng, YANG Fan. Evaluation on liquid phase fluidity of iron ore in sintering[J]. Chinese Journal of Engineering, 2008, 30(10): 1095-1100. doi: 10.13374/j.issn1001-053x.2008.10.012

Citation:

WU Shengli, PEI Yuandong, CHEN Hui, PENG Peng, YANG Fan. Evaluation on liquid phase fluidity of iron ore in sintering[J]. Chinese Journal of Engineering, 2008, 30(10): 1095-1100. doi: 10.13374/j.issn1001-053x.2008.10.012

Citation:

PDF( 739 KB)

Evaluation on liquid phase fluidity of iron ore in sintering

doi: 10.13374/j.issn1001-053x.2008.10.012

School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, China 100083

Received Date: 2007-08-25
Rev Recd Date: 2007-10-11

Available Online: 2021-08-06

Abstract

Abstract

The sinter is consolidated by fluid liquid phase through adhering the adjacent not-molten materials, and the fluidity of liquid phase is a sintering basic characteristics of iron ore. Two new evaluation indexes, the liquid phase fluidity area based on temperature distribution (FAT) and the index of sensitivity of fluidity to temperature (ISFT), were proposed. Their corresponding calculation formulas were given to rightly master the action of liquid phase in sintering and optimize ore-matching.
- iron ore,
- sintering,
- liquid phase,
- fluidity,
- index of sensitivity of fluidity to temperature(ISFT)