Influencing factors of force difference in rolling zone of eccentric shafts during cross wedge rolling

HE Tao; WANG Baoyu; HU Zhenghuan

doi:10.13374/j.issn1001-053x.2008.09.013

Volume 30 Issue 9

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2008 > 30(9): 1046-1049

HE Tao, WANG Baoyu, HU Zhenghuan. Influencing factors of force difference in rolling zone of eccentric shafts during cross wedge rolling[J]. Chinese Journal of Engineering, 2008, 30(9): 1046-1049. doi: 10.13374/j.issn1001-053x.2008.09.013

Citation:

HE Tao, WANG Baoyu, HU Zhenghuan. Influencing factors of force difference in rolling zone of eccentric shafts during cross wedge rolling[J]. Chinese Journal of Engineering, 2008, 30(9): 1046-1049. doi: 10.13374/j.issn1001-053x.2008.09.013

Citation:

PDF( 712 KB)

Influencing factors of force difference in rolling zone of eccentric shafts during cross wedge rolling

doi: 10.13374/j.issn1001-053x.2008.09.013

School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China

Received Date: 2007-09-12
Rev Recd Date: 2007-11-20

Available Online: 2021-08-06

Abstract

Abstract

In the rolling procedure of eccentric shafts by cross wedge rolling, the non-symmetry of rolling force in rolling zone is a significant characteristic. The force difference in rolling zone of eccentric shafts during cross wedge rolling was calculated by finite element method and its influencing factors were systematically analyzed. The mechanism of influencing factors on the force difference was clarified. Finally the influence degree of each influencing factor was evaluated.
- cross wedge rolling,
- eccentric shafts,
- rolling force,
- finite element method