Industrial application of control technology of oxide inclusions in tyre cord steel

GUO Dayong; MA Cheng; ZHANG Xiaojun; GENG Jishuang; NING Dong; CAO Yadan

doi:10.13374/j.issn1001-053x.2007.s1.031

Volume 29 Issue S1

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2007 > 29(S1): 48-51

GUO Dayong, MA Cheng, ZHANG Xiaojun, GENG Jishuang, NING Dong, CAO Yadan. Industrial application of control technology of oxide inclusions in tyre cord steel[J]. Chinese Journal of Engineering, 2007, 29(S1): 48-51. doi: 10.13374/j.issn1001-053x.2007.s1.031

Citation:

GUO Dayong, MA Cheng, ZHANG Xiaojun, GENG Jishuang, NING Dong, CAO Yadan. Industrial application of control technology of oxide inclusions in tyre cord steel[J]. Chinese Journal of Engineering, 2007, 29(S1): 48-51. doi: 10.13374/j.issn1001-053x.2007.s1.031

Citation:

PDF( 435 KB)

Industrial application of control technology of oxide inclusions in tyre cord steel

doi: 10.13374/j.issn1001-053x.2007.s1.031

1. Technology Center of Angang, Anshan 114001, China;
2. The First Steelmaking Plant of Angang, Anshan 114001, China

Received Date: 2007-02-10
Rev Recd Date: 2007-04-10

Available Online: 2021-08-16

Abstract

Abstract

In steel making for tyre cord, weak deoxidation, prevention of reoxidation, and control of ba-sicity and Al₂O₃ content in refining slag were adopted to decrease the melting point of inclusions in liquid steel and promote floating upward of inclusions. It was proved that the composition, size and deformation ability of inclusions in tyre cord were promoted by the application of the abovementioned technologies.
- tyre cord steel rod,
- inclusion,
- refinging