SmartCrown work roll contour of a 4-hi tandem cold rolling mill

YANG Guanghui; CAO Jianguo; ZHANG Jie; LU Haitao; JIA Shenghui; CENG Wei

doi:10.13374/j.issn1001-053x.2006.07.013

Volume 28 Issue 7

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2006 > 28(7): 669-671

YANG Guanghui, CAO Jianguo, ZHANG Jie, LU Haitao, JIA Shenghui, CENG Wei. SmartCrown work roll contour of a 4-hi tandem cold rolling mill[J]. Chinese Journal of Engineering, 2006, 28(7): 669-671. doi: 10.13374/j.issn1001-053x.2006.07.013

Citation:

YANG Guanghui, CAO Jianguo, ZHANG Jie, LU Haitao, JIA Shenghui, CENG Wei. SmartCrown work roll contour of a 4-hi tandem cold rolling mill[J]. Chinese Journal of Engineering, 2006, 28(7): 669-671. doi: 10.13374/j.issn1001-053x.2006.07.013

Citation:

PDF( 234 KB)

SmartCrown work roll contour of a 4-hi tandem cold rolling mill

doi: 10.13374/j.issn1001-053x.2006.07.013

1. Mechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China;
2. Wuhan Iron & Steel (Group) Co., Wuhan 430083, China

Received Date: 2005-05-08
Rev Recd Date: 2005-09-05

Available Online: 2021-08-24

Abstract

Abstract

The new SmartCrown profile and flatness control technology was first adopted in a wide strip tandem cold rolling mill. Through studying on the function structure and characteristic parameters, this paper deduced a way to determine the SmartCrown work roll contour. The effect of roll contour characteristic parameters on the roll gap profile was further analyzed. This study is important to the grind of the work roll contour, the control of strip shape and the spread of SmartCrown technology.
- tandem cold mill,
- strip,
- roll contour,
- SmartCrown,
- profile and flatness control