Finite element analysis of a continuous casting square billet during induction heating

WU Xueze; ZHANG Guobin; WANG Zhangsong

doi:10.13374/j.issn1001-053x.2006.04.009

Volume 28 Issue 4

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2006 > 28(4): 348-352

WU Xueze, ZHANG Guobin, WANG Zhangsong. Finite element analysis of a continuous casting square billet during induction heating[J]. Chinese Journal of Engineering, 2006, 28(4): 348-352. doi: 10.13374/j.issn1001-053x.2006.04.009

Citation:

WU Xueze, ZHANG Guobin, WANG Zhangsong. Finite element analysis of a continuous casting square billet during induction heating[J]. Chinese Journal of Engineering, 2006, 28(4): 348-352. doi: 10.13374/j.issn1001-053x.2006.04.009

Citation:

PDF( 224 KB)

Finite element analysis of a continuous casting square billet during induction heating

doi: 10.13374/j.issn1001-053x.2006.04.009

1. Mechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China;
2. College of Metallurgy and Energy Sources, Hebei Polytechnic University, Tangshan 063009, China

Received Date: 2005-03-28
Rev Recd Date: 2005-10-08

Available Online: 2021-08-24

Abstract

Abstract

The great engineering software ANSYS was used to simulate the induction heating process of a continuous casting square billet in multi-physical coupling field based on the electromagnetic induction and heat exchange theory. The analyzed results of temperature gradient and magnetic field distribution in the section of the casting billet after induction heating were consistent with the measured ones.
- square billet,
- induction heating,
- finite element analysis