Numerical simulation of Liquid Steel Solidification in Slab Molds

ZHANG Jiongming; ZHANG Li; YANG Huitao; WANG Xinhua

doi:10.13374/j.issn1001-053x.2004.02.005

Volume 26 Issue 2

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2004 > 26(2): 130-134

ZHANG Jiongming, ZHANG Li, YANG Huitao, WANG Xinhua. Numerical simulation of Liquid Steel Solidification in Slab Molds[J]. Chinese Journal of Engineering, 2004, 26(2): 130-134. doi: 10.13374/j.issn1001-053x.2004.02.005

Citation:

ZHANG Jiongming, ZHANG Li, YANG Huitao, WANG Xinhua. Numerical simulation of Liquid Steel Solidification in Slab Molds[J]. Chinese Journal of Engineering, 2004, 26(2): 130-134. doi: 10.13374/j.issn1001-053x.2004.02.005

Citation:

PDF( 1310 KB)

Numerical simulation of Liquid Steel Solidification in Slab Molds

doi: 10.13374/j.issn1001-053x.2004.02.005

1. Metallurgical and Ecological Engineering School, University of Science and Technology Beijing, Beijing 100083, China;
2. Technology Center of Baosteel, Shanghai 201941, China

Received Date: 2002-11-25
Available Online: 2021-08-16

Abstract

Abstract

A mathematical model was proposed to calculate the stress distribution of the solidification shell in a slab mold based on the local heat flux calculated by using the measured temperature of the copper plate. Solidification equations to liquid steel were built and discreted by the finite element method. ANSYS commercial software was used to solve these discrete equations, the stress and strain distributions were obtained and the taper of the mold was decided according to these calculating results.
- slab mold,
- stress distribution,
- taper