Strip Flatness Model Considering Heredity Influence of Entrance Strip Shape

ZHANG Dazhi

doi:10.13374/j.issn1001-053x.2002.05.015

Volume 24 Issue 5

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2002 > 24(5): 541-543

ZHANG Dazhi. Strip Flatness Model Considering Heredity Influence of Entrance Strip Shape[J]. Chinese Journal of Engineering, 2002, 24(5): 541-543. doi: 10.13374/j.issn1001-053x.2002.05.015

Citation:

ZHANG Dazhi. Strip Flatness Model Considering Heredity Influence of Entrance Strip Shape[J]. Chinese Journal of Engineering, 2002, 24(5): 541-543. doi: 10.13374/j.issn1001-053x.2002.05.015

ZHANG Dazhi. Strip Flatness Model Considering Heredity Influence of Entrance Strip Shape[J]. Chinese Journal of Engineering, 2002, 24(5): 541-543. doi: 10.13374/j.issn1001-053x.2002.05.015

Citation:

ZHANG Dazhi. Strip Flatness Model Considering Heredity Influence of Entrance Strip Shape[J]. Chinese Journal of Engineering, 2002, 24(5): 541-543. doi: 10.13374/j.issn1001-053x.2002.05.015

PDF( 336 KB)

Strip Flatness Model Considering Heredity Influence of Entrance Strip Shape

doi: 10.13374/j.issn1001-053x.2002.05.015

ZHANG Dazhi

National Engineering Research Center for Advanced Rolling Technology, UST Beijing, Beijing 100083, China

Received Date: 2001-05-21
Available Online: 2021-08-26

Abstract

Abstract

A flatness model expressed by the difference of entrance strip crown and exit strip crown is built based on the definition of flatness and the invariable cubage theory of strip rolling, and the entrance strip shape is also considered in the flatness model. The model was used in the rolling parameters optimal design system and the rolling shape optimal design system, and good results were obtained.
- strip shape,
- flatness,
- heredity influence,
- tandem strip mill,
- mathematical model