Information Model of CAD/CAPP Integration for the Tool of Cross Wedge Rolling

YANG Hongqing; WANG Baoyu; HU Zhenghuan

doi:10.13374/j.issn1001-053x.2002.03.060

Volume 24 Issue 3

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2002 > 24(3): 299-302

YANG Hongqing, WANG Baoyu, HU Zhenghuan. Information Model of CAD/CAPP Integration for the Tool of Cross Wedge Rolling[J]. Chinese Journal of Engineering, 2002, 24(3): 299-302. doi: 10.13374/j.issn1001-053x.2002.03.060

Citation:

YANG Hongqing, WANG Baoyu, HU Zhenghuan. Information Model of CAD/CAPP Integration for the Tool of Cross Wedge Rolling[J]. Chinese Journal of Engineering, 2002, 24(3): 299-302. doi: 10.13374/j.issn1001-053x.2002.03.060

Citation:

PDF( 414 KB)

Information Model of CAD/CAPP Integration for the Tool of Cross Wedge Rolling

doi: 10.13374/j.issn1001-053x.2002.03.060

Mechanical Engineering School, UST Beijing, Beijing 100083, China

Received Date: 2001-11-21
Available Online: 2021-08-21

Abstract

Abstract

To the characteristic of the tool of cross wedge rolling, the modeling method and structure about information model of CAD/CAPP integration for the tool of cross wedge rolling based on feature were presen-ted. And with this information model a typical and symmetrical tool of cross wedge rolling was analyzed and instantiated. The results indicated that the basic compositive structure of tool was reflected in this information model of feature, as well as the machining technical information for tool of cross wedge rolling was described integrality.
- tool of cross wedge rolling,
- feature modeling,
- CAD/CAPP,