Device for Producing Ceramic Lined Steel Elbow by SHS-Gravitational Process

LIN Tao; GUO Shiju; YIN Sheng; GUO Zhimeng; SUI Ya'nan

doi:10.13374/j.issn1001-053x.2001.03.041

Volume 23 Issue 3

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2001 > 23(3): 246-248

LIN Tao, GUO Shiju, YIN Sheng, GUO Zhimeng, SUI Ya'nan. Device for Producing Ceramic Lined Steel Elbow by SHS-Gravitational Process[J]. Chinese Journal of Engineering, 2001, 23(3): 246-248. doi: 10.13374/j.issn1001-053x.2001.03.041

Citation:

LIN Tao, GUO Shiju, YIN Sheng, GUO Zhimeng, SUI Ya'nan. Device for Producing Ceramic Lined Steel Elbow by SHS-Gravitational Process[J]. Chinese Journal of Engineering, 2001, 23(3): 246-248. doi: 10.13374/j.issn1001-053x.2001.03.041

Citation:

PDF( 384 KB)

Device for Producing Ceramic Lined Steel Elbow by SHS-Gravitational Process

doi: 10.13374/j.issn1001-053x.2001.03.041

Material Science and Engineering School, UST Beijing, Beijing 100083, China

Received Date: 2001-01-12

Abstract

Abstract

A new device that is used to produce ceramic lined steel elbow by SHS-gravitational process has been developed. The device composes of three parts:main port, control part and watch part. There are motor, decelerating case, mounting plate and base in the main part, temperature detector, rate adjuster and computer in the control part, and composes of monitor and camera in the watch part. The device can auto-control the synthesizing process of the composite elbow. The composite elbow with the diameter of 325 mm and the curve angle of 90° is produced.
- SHS,
- thermite reaction,
- automation