Microstructure and Mechanical Properties of Hot Rolling Steel Containing Single Cu Alloying Element

Ren Huiping; Ren Huiping

doi:10.13374/j.issn1001-053x.1999.06.010

Volume 21 Issue 6

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1999 > 21(6): 548-551

Ren Huiping, Ren Huiping. Microstructure and Mechanical Properties of Hot Rolling Steel Containing Single Cu Alloying Element[J]. Chinese Journal of Engineering, 1999, 21(6): 548-551. doi: 10.13374/j.issn1001-053x.1999.06.010

Citation:

Ren Huiping, Ren Huiping. Microstructure and Mechanical Properties of Hot Rolling Steel Containing Single Cu Alloying Element[J]. Chinese Journal of Engineering, 1999, 21(6): 548-551. doi: 10.13374/j.issn1001-053x.1999.06.010

Citation:

PDF( 590 KB)

Microstructure and Mechanical Properties of Hot Rolling Steel Containing Single Cu Alloying Element

doi: 10.13374/j.issn1001-053x.1999.06.010

Ren Huiping^1,2,
Ren Huiping¹

Materials Science and Engineering School, UST Beijing, Beijing 100083, China

Received Date: 1999-01-19
Available Online: 2021-08-27

Abstract

Abstract

The microstuccture and mechanical properties of high purity hot rolling steel containing single Cu alloying element was investigated, before and after aging annealing. It is shown that the steel has high strengthening effect and high ductility. The precipitation occurred prior to the recrystalization during aging annealing. It is believed that the new steel should have a very positive future.
- copper,
- high purity structural steel,
- aging precipitation recrystalization,