Rolling on Steel-Aluminum Solid to Liquid Immersing Bonding Plate

Zhang Peng; Du Yunhui; Ren Xueping; Kang Yonglin; Liu Hanwu; Cui Jianzhong; Ba Limin

doi:10.13374/j.issn1001-053x.1999.02.051

Volume 21 Issue 2

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1999 > 21(2): 179-181

Zhang Peng, Du Yunhui, Ren Xueping, Kang Yonglin, Liu Hanwu, Cui Jianzhong, Ba Limin. Rolling on Steel-Aluminum Solid to Liquid Immersing Bonding Plate[J]. Chinese Journal of Engineering, 1999, 21(2): 179-181. doi: 10.13374/j.issn1001-053x.1999.02.051

Citation:

Zhang Peng, Du Yunhui, Ren Xueping, Kang Yonglin, Liu Hanwu, Cui Jianzhong, Ba Limin. Rolling on Steel-Aluminum Solid to Liquid Immersing Bonding Plate[J]. Chinese Journal of Engineering, 1999, 21(2): 179-181. doi: 10.13374/j.issn1001-053x.1999.02.051

Citation:

PDF( 379 KB)

Rolling on Steel-Aluminum Solid to Liquid Immersing Bonding Plate

doi: 10.13374/j.issn1001-053x.1999.02.051

1. Material Science and Engineering School, UST Beijing, Beijing 100083, China;
2. Metal Forming Department, Northeastern University, Snenyang 110006;
3. Anshan Automobile Fittin

Received Date: 1998-06-12
Available Online: 2021-08-27

Abstract

Abstract

The interfacial shear property of steel-aluminum solid to liquid immersing bonding plate after being rolled was studied and the relationship between interfacial shear strength and relative reduction was determined.The result proved that:for the bonding plate made up with 1.2mm-thick 08Al steel plate and 1.0 mm-thick aluminum layer, when the relative reduction was 2.73%,the interfacial subsidiary stress could be eliminated and thus the maximum interfacial shear strength 83.5MPa was obtained.
- rolling,
- solid to liquid immersing bonding plate,
- interfacial subsidiary stress