Extrusion Characteristics of Composite Powders of Stainless Steel and Zirconia

Xie Jianxin; Chen Jingping; Liu Huinan

doi:10.13374/j.issn1001-053x.1997.06.015

Volume 19 Issue 6

Sep. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1997 > 19(6): 590-594

Xie Jianxin, Chen Jingping, Liu Huinan. Extrusion Characteristics of Composite Powders of Stainless Steel and Zirconia[J]. Chinese Journal of Engineering, 1997, 19(6): 590-594. doi: 10.13374/j.issn1001-053x.1997.06.015

Citation:

Xie Jianxin, Chen Jingping, Liu Huinan. Extrusion Characteristics of Composite Powders of Stainless Steel and Zirconia[J]. Chinese Journal of Engineering, 1997, 19(6): 590-594. doi: 10.13374/j.issn1001-053x.1997.06.015

Citation:

PDF( 505 KB)

Extrusion Characteristics of Composite Powders of Stainless Steel and Zirconia

doi: 10.13374/j.issn1001-053x.1997.06.015

Material Science and Engineering School, UST Beijing, Beijing 100083, China

Received Date: 1997-09-05
Available Online: 2021-09-10

Abstract

Abstract

The extrustioncharacteristics of composite powders of stainless steel and zirconiahave been researched experimentally, and the upper extruded composition of the composite powders being discussed. Hydroxy-propyl methyl-cellulose (HPMC) and water was used as the binder for the extrusion. The results show that the extrudable upper compositionincreases with increasing the stainless steel powder content in composite powder, and that the reasonable content of HPMC in the binder being 10%.
- composite material,
- functionally gradient material,
- powder extrusion,
- extrudabiligy