Effect of Simulated Welding Condition on the Structure and Properties of Ni-P Amorphous Alloy

Yu Hongying; Sun Dongbo; Yang Dejun

doi:10.13374/j.issn1001-053x.1996.s2.016

Volume 18 Issue S2

Nov. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1996 > 18(S2): 73-76

Yu Hongying, Sun Dongbo, Yang Dejun. Effect of Simulated Welding Condition on the Structure and Properties of Ni-P Amorphous Alloy[J]. Chinese Journal of Engineering, 1996, 18(S2): 73-76. doi: 10.13374/j.issn1001-053x.1996.s2.016

Citation:

Yu Hongying, Sun Dongbo, Yang Dejun. Effect of Simulated Welding Condition on the Structure and Properties of Ni-P Amorphous Alloy[J]. Chinese Journal of Engineering, 1996, 18(S2): 73-76. doi: 10.13374/j.issn1001-053x.1996.s2.016

Citation:

PDF( 372 KB)

Effect of Simulated Welding Condition on the Structure and Properties of Ni-P Amorphous Alloy

doi: 10.13374/j.issn1001-053x.1996.s2.016

Department of Surface Science and Corrosion Engineering, USTB, Beijing 100083, PRC

Received Date: 1996-01-22
Available Online: 2021-11-13

Abstract

Abstract

The structure and properties of electroless Ni-P amorphous alloy under the simulated welding condition by changing the temperature and time of heat treatment were investigated.It has been shown that the crystallization of Ni-P alloy would not accur when time of heat treatment is shorter than 60 seconds.(beside 1000℃,60s),but the hardness of the alloy increases obviously.Under the condition of heat treament with shorter time,the handness of the alloy reaches the maximum when the temperature of heat treatment is 700℃.
- electroless nickel,
- structure,
- weld