Effect of Tempering at 380℃ on Mechanical Properties of Cold Rolled 17-7 Stainless Steel

Miao Bohe; Zhang Maocai; Shi Shifeng; Zhang Qingquan; Wu Xuefeng; Fan Chuifu

doi:10.13374/j.issn1001-053x.1996.06.007

Volume 18 Issue 6

Nov. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1996 > 18(6): 522-527

Miao Bohe, Zhang Maocai, Shi Shifeng, Zhang Qingquan, Wu Xuefeng, Fan Chuifu. Effect of Tempering at 380℃ on Mechanical Properties of Cold Rolled 17-7 Stainless Steel[J]. Chinese Journal of Engineering, 1996, 18(6): 522-527. doi: 10.13374/j.issn1001-053x.1996.06.007

Citation:

Miao Bohe, Zhang Maocai, Shi Shifeng, Zhang Qingquan, Wu Xuefeng, Fan Chuifu. Effect of Tempering at 380℃ on Mechanical Properties of Cold Rolled 17-7 Stainless Steel[J]. Chinese Journal of Engineering, 1996, 18(6): 522-527. doi: 10.13374/j.issn1001-053x.1996.06.007

Citation:

PDF( 518 KB)

Effect of Tempering at 380℃ on Mechanical Properties of Cold Rolled 17-7 Stainless Steel

doi: 10.13374/j.issn1001-053x.1996.06.007

1. Department of Material Science and Engineering, USTB, Beijing 100083;
2. State Key Lab for Advanced Metals and Materials, USTB;
3. Research Institute of Metallurgy Shougang Co

Received Date: 1995-03-25
Available Online: 2021-11-13

Abstract

Abstract

The microstructure and martensite fraction of 17-7 stainless steels,as cold rolled,tempered 2h at 380℃ and AISI301 stainless steel produced in Franc are examined respectively by magnetization in conjunction with transmission electron microscopy and X-ray techniques.The effect of the cold rolling and tempering on the mechanical properies of AISI301 stainless steel is discussed based on the experimental results.
- AISI301 stainless steel,
- cold rolling,
- tempering,
- martensite transformation