Analysis of Contact Surface in Plate Type Cross Wedge Rolling

Wang Baoyu; Hu Zhenghuan

doi:10.13374/j.issn1001-053x.1995.01.016

Volume 17 Issue 1

Sep. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1995 > 17(1): 64-67

Wang Baoyu, Hu Zhenghuan. Analysis of Contact Surface in Plate Type Cross Wedge Rolling[J]. Chinese Journal of Engineering, 1995, 17(1): 64-67. doi: 10.13374/j.issn1001-053x.1995.01.016

Citation:

Wang Baoyu, Hu Zhenghuan. Analysis of Contact Surface in Plate Type Cross Wedge Rolling[J]. Chinese Journal of Engineering, 1995, 17(1): 64-67. doi: 10.13374/j.issn1001-053x.1995.01.016

Wang Baoyu, Hu Zhenghuan. Analysis of Contact Surface in Plate Type Cross Wedge Rolling[J]. Chinese Journal of Engineering, 1995, 17(1): 64-67. doi: 10.13374/j.issn1001-053x.1995.01.016

Citation:

Wang Baoyu, Hu Zhenghuan. Analysis of Contact Surface in Plate Type Cross Wedge Rolling[J]. Chinese Journal of Engineering, 1995, 17(1): 64-67. doi: 10.13374/j.issn1001-053x.1995.01.016

PDF( 294 KB)

Analysis of Contact Surface in Plate Type Cross Wedge Rolling

doi: 10.13374/j.issn1001-053x.1995.01.016

Mechanical Engineering College, USTB, Beijing 100083, PRC

Received Date: 1994-03-20
Available Online: 2021-09-06

Abstract

Abstract

Based on the analysis of the process of cross wedge rolling,the geometry model of rolled part and tool has been established. The contact surface of rolled part with tool has been studied. The contact surface equations and the boundary curve equations have been presented. The software package of a computer aided drafting of the part during rolled has been developed. The contact surface has been displayed in images.
- cross-wedge,
- rolling,
- contact surface,
- mathematical model