The Research of Soaking Process of Grinding Wheels and Its Cutting Action

Zhao Jinghua; Qu Kaihong

doi:10.13374/j.issn1001-053x.1994.05.009

Volume 16 Issue 5

Nov. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1994 > 16(5): 446-449

Zhao Jinghua, Qu Kaihong. The Research of Soaking Process of Grinding Wheels and Its Cutting Action[J]. Chinese Journal of Engineering, 1994, 16(5): 446-449. doi: 10.13374/j.issn1001-053x.1994.05.009

Citation:

Zhao Jinghua, Qu Kaihong. The Research of Soaking Process of Grinding Wheels and Its Cutting Action[J]. Chinese Journal of Engineering, 1994, 16(5): 446-449. doi: 10.13374/j.issn1001-053x.1994.05.009

Zhao Jinghua, Qu Kaihong. The Research of Soaking Process of Grinding Wheels and Its Cutting Action[J]. Chinese Journal of Engineering, 1994, 16(5): 446-449. doi: 10.13374/j.issn1001-053x.1994.05.009

Citation:

PDF( 362 KB)

The Research of Soaking Process of Grinding Wheels and Its Cutting Action

doi: 10.13374/j.issn1001-053x.1994.05.009

Mechanical Engineering Collage, USTB, Beijing 100083, PRC

Received Date: 1994-02-23
Available Online: 2021-11-13

Abstract

Abstract

This paper describes the optimized soaking process and its cutting action of the wheels soaked in KI solution. By employing the soaked wheel, the pores cloging and chip sticking on the surface of the wheel are greatly improved, which results in the lower cutting force and temperature and improved surface quality. Besides the simple soaking process, it is also convenient and inexpensive.
- gringing,
- abrasive wheel,
- high-speed tool steels/V-riched high-speed steels