Theoretical Solution of Groove Curve on Plug of Rifled Tubes

Li Lianshi; Yang Xiaoping

doi:10.13374/j.issn1001-053x.1994.01.010

Volume 16 Issue 1

Oct. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1994 > 16(1): 43-46

Li Lianshi, Yang Xiaoping. Theoretical Solution of Groove Curve on Plug of Rifled Tubes[J]. Chinese Journal of Engineering, 1994, 16(1): 43-46. doi: 10.13374/j.issn1001-053x.1994.01.010

Citation:

Li Lianshi, Yang Xiaoping. Theoretical Solution of Groove Curve on Plug of Rifled Tubes[J]. Chinese Journal of Engineering, 1994, 16(1): 43-46. doi: 10.13374/j.issn1001-053x.1994.01.010

Li Lianshi, Yang Xiaoping. Theoretical Solution of Groove Curve on Plug of Rifled Tubes[J]. Chinese Journal of Engineering, 1994, 16(1): 43-46. doi: 10.13374/j.issn1001-053x.1994.01.010

Citation:

Li Lianshi, Yang Xiaoping. Theoretical Solution of Groove Curve on Plug of Rifled Tubes[J]. Chinese Journal of Engineering, 1994, 16(1): 43-46. doi: 10.13374/j.issn1001-053x.1994.01.010

PDF( 334 KB)

Theoretical Solution of Groove Curve on Plug of Rifled Tubes

doi: 10.13374/j.issn1001-053x.1994.01.010

Rolling Institute, USTB, Beijing 100083, PRC

Received Date: 1992-11-15
Available Online: 2021-10-29

Abstract

Abstract

The key technology for producing rifled tubes is designing the shape of plug.It is diffcult to produce high quality rifled tubes by using of the straight line instead of the plug curve.Through analysis of theory,a theoretical formula is set up and achieve satisfied result through factory try out.
- rifled tubes,
- plug