Effect of Cold Rolling Process on Basic Feature of Formablity of the 1Cr13 Stainless Steel Sheet

Ruan Xuhuan; Li Wei; Wang Xianjin

doi:10.13374/j.issn1001-053x.1992.01.026

Volume 14 Issue 1

Oct. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1992 > 14(1): 56-62

Ruan Xuhuan, Li Wei, Wang Xianjin. Effect of Cold Rolling Process on Basic Feature of Formablity of the 1Cr13 Stainless Steel Sheet[J]. Chinese Journal of Engineering, 1992, 14(1): 56-62. doi: 10.13374/j.issn1001-053x.1992.01.026

Citation:

Ruan Xuhuan, Li Wei, Wang Xianjin. Effect of Cold Rolling Process on Basic Feature of Formablity of the 1Cr13 Stainless Steel Sheet[J]. Chinese Journal of Engineering, 1992, 14(1): 56-62. doi: 10.13374/j.issn1001-053x.1992.01.026

Citation:

PDF( 577 KB)

Effect of Cold Rolling Process on Basic Feature of Formablity of the 1Cr13 Stainless Steel Sheet

doi: 10.13374/j.issn1001-053x.1992.01.026

Department of Metals Formin

Received Date: 1991-01-24
Rev Recd Date: 1991-09-20

Available Online: 2021-10-16

Abstract

Abstract

It has been found that main factors effecting on the forming property are the total reduction of cold rolling and the annealing temperature.The results obtained shows that optimum process parameters for deep drawing lCr13 stainless steel sheet are: the total ruduction is 60%,the annealing temperature is 750℃ followed with the air-cooling, The aspect of metallurgical structure and texlure was also discussed.
- total reduction,
- metallurgical structure,
- formablity,
- stainless steel