Non-Metal Inclusion in the Continuous Casting Strand for Ti-Stabilized Stainless Steel

Liu Xinhua; Cai Kaike; Zhang Shuxin; Ming Shuizhen; Han Xiuying; Ceng Shaohua

doi:10.13374/j.issn1001-053x.1989.02.020

Volume 11 Issue 2

Nov. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1989 > 11(2): 111-116

Liu Xinhua, Cai Kaike, Zhang Shuxin, Ming Shuizhen, Han Xiuying, Ceng Shaohua. Non-Metal Inclusion in the Continuous Casting Strand for Ti-Stabilized Stainless Steel[J]. Chinese Journal of Engineering, 1989, 11(2): 111-116. doi: 10.13374/j.issn1001-053x.1989.02.020

Citation:

Liu Xinhua, Cai Kaike, Zhang Shuxin, Ming Shuizhen, Han Xiuying, Ceng Shaohua. Non-Metal Inclusion in the Continuous Casting Strand for Ti-Stabilized Stainless Steel[J]. Chinese Journal of Engineering, 1989, 11(2): 111-116. doi: 10.13374/j.issn1001-053x.1989.02.020

Citation:

PDF( 1724 KB)

Non-Metal Inclusion in the Continuous Casting Strand for Ti-Stabilized Stainless Steel

doi: 10.13374/j.issn1001-053x.1989.02.020

Received Date: 1987-10-30
Available Online: 2021-11-15

Abstract

Abstract

The quantity, morphology,composition and dimensional distribution of inclusions for the continuous casting strand of Ti-stabilized stainless steel has been investigated in this paper. The results arc as follows, there arc two kinds of inclusions in this stainless steel. One is the oxide containing Ti、Na, K. The size of oxide are 100-200 μm. The other is TiN cluster. The single phase of TiN is less than 30 μm. And the accumulation of inclusions could be seen both in the surface of inside radius and the centre of slab.
- continuous casting,
- stainless steel,
- inclusion,
- oxide,
- nitride,
- Ti-stabilized stainless steel