X1215易切削鋼連鑄坯成分偏析的研究

<listing id="l9bhj"><var id="l9bhj"></var></listing>

<var id="l9bhj"><strike id="l9bhj"></strike></var>

<menuitem id="l9bhj"></menuitem>

<var id="l9bhj"></var><cite id="l9bhj"><video id="l9bhj"></video></cite>

<menuitem id="l9bhj"></menuitem>

<cite id="l9bhj"><strike id="l9bhj"><listing id="l9bhj"></listing></strike></cite><cite id="l9bhj"><span id="l9bhj"><menuitem id="l9bhj"></menuitem></span></cite>

<var id="l9bhj"></var>

<var id="l9bhj"></var>

<var id="l9bhj"></var>

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

X1215易切削鋼連鑄坯成分偏析的研究

王宏斌, 林騰昌, 朱榮, 段飛虎, 李聯生, 張志強, 王勇

文章導航 > 工程科學學報 > 2011 > 33(S1): 161-164

王宏斌, 林騰昌, 朱榮, 段飛虎, 李聯生, 張志強, 王勇. X1215易切削鋼連鑄坯成分偏析的研究[J]. 工程科學學報, 2011, 33(S1): 161-164. doi: 10.13374/j.issn1001-053x.2011.s1.034

引用本文:

王宏斌, 林騰昌, 朱榮, 段飛虎, 李聯生, 張志強, 王勇. X1215易切削鋼連鑄坯成分偏析的研究[J]. 工程科學學報, 2011, 33(S1): 161-164. doi: 10.13374/j.issn1001-053x.2011.s1.034

WANG Hong-bin, LIN Teng-chang, ZHU Rong, DUAN Fei-hu, LI Lian-sheng, ZHANG Zhi-qiang, WANG Yong. Study on composition segregation of X1215 free-cutting steel continuous casting billet[J]. Chinese Journal of Engineering, 2011, 33(S1): 161-164. doi: 10.13374/j.issn1001-053x.2011.s1.034

Citation:

WANG Hong-bin, LIN Teng-chang, ZHU Rong, DUAN Fei-hu, LI Lian-sheng, ZHANG Zhi-qiang, WANG Yong. Study on composition segregation of X1215 free-cutting steel continuous casting billet[J]. Chinese Journal of Engineering, 2011, 33(S1): 161-164. doi: 10.13374/j.issn1001-053x.2011.s1.034

王宏斌, 林騰昌, 朱榮, 段飛虎, 李聯生, 張志強, 王勇. X1215易切削鋼連鑄坯成分偏析的研究[J]. 工程科學學報, 2011, 33(S1): 161-164. doi: 10.13374/j.issn1001-053x.2011.s1.034

引用本文:

王宏斌, 林騰昌, 朱榮, 段飛虎, 李聯生, 張志強, 王勇. X1215易切削鋼連鑄坯成分偏析的研究[J]. 工程科學學報, 2011, 33(S1): 161-164. doi: 10.13374/j.issn1001-053x.2011.s1.034

WANG Hong-bin, LIN Teng-chang, ZHU Rong, DUAN Fei-hu, LI Lian-sheng, ZHANG Zhi-qiang, WANG Yong. Study on composition segregation of X1215 free-cutting steel continuous casting billet[J]. Chinese Journal of Engineering, 2011, 33(S1): 161-164. doi: 10.13374/j.issn1001-053x.2011.s1.034

Citation:

WANG Hong-bin, LIN Teng-chang, ZHU Rong, DUAN Fei-hu, LI Lian-sheng, ZHANG Zhi-qiang, WANG Yong. Study on composition segregation of X1215 free-cutting steel continuous casting billet[J]. Chinese Journal of Engineering, 2011, 33(S1): 161-164. doi: 10.13374/j.issn1001-053x.2011.s1.034

X1215易切削鋼連鑄坯成分偏析的研究

doi: 10.13374/j.issn1001-053x.2011.s1.034

1. 北京科技大學冶金與生態工程學院, 北京 100083;
2. 宣化鋼鐵集團有限責任公司, 河北張家口 075100

通訊作者:
林騰昌,E-mail:lintengchang@126.com

中圖分類號: TF777.2
計量
- 文章訪問數: 286
- HTML全文瀏覽量: 80
- PDF下載量: 3
- 被引次數: 0
出版歷程
- 收稿日期: 2011-08-01
- 網絡出版日期: 2021-07-30

Study on composition segregation of X1215 free-cutting steel continuous casting billet

1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China;
2. Xuanhua Iron & Steel Group Co. Ltd., Hebei Zhangjiakou 075100, China

摘要: 采用化學分析和低倍酸浸實驗方法研究了低碳高硫易切削鋼連鑄坯的C、Si、Mn、P、S的成分偏析特征并分析其形成原因.結果表明,連鑄坯的C、Si、Mn、P、S的偏析度均在0.9~1.1之間,S、P元素存在中心負偏析,低倍酸浸實驗檢測發現連鑄坯存在中心疏松.分析認為,中心疏松是導致中心元素負偏析的主要原因.
- 易切削鋼 /
- 成分 /
- 偏析 /
- 疏松
Abstract: The characteristics and reasons of C,Si,Mn,P,S composition segregations in low carbon high sulfur free cutting steel were researched by chemical analysis and hot hydrochloric acid. The results show that the segregation degree of elements (C, Si, Mn, P, S) is between 0.9 and 1.1,S and P elements are negative segregation at the billet center region,and the center area of continuous casting billet is porosity. The analyses show that the center porosity is the main reason of element negative segregations at the center area.
- free cutting steel /
- composition /
- segregation /
- porosity

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 286
HTML全文瀏覽量: 80
PDF下載量: 3
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回