超聲與吹氬處理對鋼液中夾雜物去除效果的對比研究

申永剛; 陳偉慶; 馬新建

doi:10.13374/j.issn1001-053x.2010.07.019

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名

郵箱

手機號碼

標題

留言內容

驗證碼

超聲與吹氬處理對鋼液中夾雜物去除效果的對比研究

doi: 10.13374/j.issn1001-053x.2010.07.019

1. 北京科技大學冶金與生態工程學院, 北京 100083;
2. 寶鋼研究院設備研究所, 上海 201900

詳細信息

作者簡介:
申永剛(1983-),男,碩士研究生;陳偉慶(1951-),男,教授,博士生導師,E-mail:wqchen.ustb@163.com

中圖分類號: TF03⁺1
計量
- 文章訪問數: 113
- HTML全文瀏覽量: 28
- PDF下載量: 3
- 被引次數: 0
出版歷程
- 收稿日期: 2009-11-17

Comparative study on inclusion removal efficiency in molten steel treated by ultrasonic and argon-blowing

1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China;
2. Equipment Research Institute, Baosteel Research Institute, Shanghai 201900, China

摘要

摘要: 為提高鋼的潔凈度,減少鋼中夾雜物含量,采用超聲波工具頭直接插入高溫鋼液進行處理的方法,對比研究了超聲波處理和吹氬處理去除鋼液中夾雜物的效果.結果表明:超聲波單獨處理可以減少鋼液中Al₂O₃夾雜物,但去除率較低,約為4%～12%;隨著超聲處理時間的增加和超聲波功率的減小,夾雜物去除率提高.吹氬單獨處理時,鋼液中夾雜物去除率較高,為29%～41%;隨氬氣流量的增加,夾雜物去除率呈升高的趨勢.
- 煉鋼 /
- 夾雜物去除 /
- 超聲波 /
- 吹氬 /
- 超聲空化
Abstract: Ultrasonic treatment was used by way of an ultrasonic wave probe directly inserted into molten steel to improve the cleanliness of steel and decrease the amount of inclusions in steel. A comparative study of ultrasonic and argon-blowing treatment was carried out on inclusion removal efficiency in molten steel. Experimental results showed that the amount of inclusions decreased when the ultrasonic wave was inputted into molten steel. But the inclusions removal rate was low, about 4% to 12%. When ultrasonic treatment was carried out solely, with decreasing power and increasing treatment time, the inclusions removal rate was increased. When argon-blowing was carried out solely, the inclusions removal rate was high, from 29% to 41%. With increasing argon-blowing flux, the inclusions removal efficiency was found a trend of rising.
- steelmaking /
- inclusion removal /
- ultrasonic /
- argon-blowing /
- ultrasonic cavitation