方管鋁型材噴水冷卻溫度場模擬及影響因素分析

何艷兵; 楊海波; 李烈軍; 曹新春

doi:10.13374/j.issn1001-053x.2010.03.016

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名

郵箱

手機號碼

標題

留言內容

驗證碼

方管鋁型材噴水冷卻溫度場模擬及影響因素分析

doi: 10.13374/j.issn1001-053x.2010.03.016

1. 北京科技大學機械工程學院, 北京 100083;
2. 廣州鋼鐵企業集團技術研發中心, 廣州 510381

基金項目:

廣東省教育部產學研結合計劃項目(No.2009B090300063)

詳細信息

作者簡介:
何艷兵(1984-),男,碩士研究生;楊海波(1961-),男,教授,博士,E-mail:yhb@me.ustb.edu.cn

中圖分類號: TG156.3
計量
- 文章訪問數: 122
- HTML全文瀏覽量: 15
- PDF下載量: 5
- 被引次數: 0
出版歷程
- 收稿日期: 2009-10-15

Simulation of temperature field and analysis of influencing factors for a square tube aluminum profile in spray cooling

1. School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China;
2. Technology R&D Center, Guangzhou Iron&Steel Enterprise Group, Guangzhou 510381, China

摘要

摘要: 為了解決方管鋁型材冷卻不均的問題,利用有限元分析軟件Fluent,對方管鋁型材噴水冷卻的溫度場進行了三維瞬態數值模擬,分析了方管鋁型材特征點的溫度場變化規律,研究了擠出成形速度、噴嘴縱向間距及噴嘴橫向間距對方管鋁型材冷卻溫度場的影響.結果表明:擠出成形速度和噴嘴縱向間距對方管鋁型材縱向溫度場影響明顯,而噴嘴橫向間距對溫度場的影響主要表現在橫向上.采用最大的擠出成形速度、最小的噴嘴縱向間距和80mm的噴嘴橫向間距可以得到較均勻的冷卻溫度場.
- 鋁型材 /
- 噴水冷卻 /
- 溫度場 /
- 數值模擬 /
- 均勻性
Abstract: In order to solve the issue of uneven cooling of square tube aluminum profiles,three-dimensional transient numerical simulation for the temperature field of a square tube aluminum profile in spray cooling was carried out by the finite element analysis software Fluent.The change in temperature field at characteristic points in the square tube aluminum profile was analyzed.The influence of extrusion velocity,nozzle vertical separation distance and nozzle horizontal separation distance on the temperature field was researched.The results show that extrusion velocity and nozzle vertical separation distance have a great influence on the temperature field in the vertical direction;and nozzle horizontal separation distance has a great influence on the temperature field in the horizontal direction.With the maximum extrusion speed,minimum nozzle vertical separation distance and a nozzle horizontal separation distance of 80 mm,the temperature field of spray cooling can be more uniform.
- aluminum profile /
- spray cooling /
- temperature field /
- numerical simulation /
- uniformity