水平連鑄圓坯凝固及鑄坯質量的研究

寧建成; 朱榮; 董凱; 周春芳

doi:10.13374/j.issn1001-053x.2009.s1.005

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名

郵箱

手機號碼

標題

留言內容

驗證碼

水平連鑄圓坯凝固及鑄坯質量的研究

doi: 10.13374/j.issn1001-053x.2009.s1.005

寧建成^1,2,
朱榮^1,3,
董凱^1,3,
周春芳^1,3

1. 北京科技大學冶金與生態工程學院, 北京 100083;
2. 湖南衡陽鋼管(集團)有限公司, 衡陽 421001;
3. 北京科技大學生態與循環冶金教育部重點實驗室, 北京 100083

詳細信息

作者簡介:
寧建成(1972-),男,博士研究生,hgnjc@yahoo.cn

計量
- 文章訪問數: 256
- HTML全文瀏覽量: 79
- PDF下載量: 4
- 被引次數: 0
出版歷程
- 收稿日期: 2009-10-01
- 網絡出版日期: 2021-08-09

Study on solidification of round billet horizontal continuous casting and quality of casting blank

1. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China;
2. Hengyang Valin Steel Tube Co Ltd, Hengyang 421001, China;
3. Key Laboratory of the Ministry of Education of China for Ecology and Circular Metallurgy, University of Science and Technology Beijing; Beijing 100083, China

摘要

摘要: 以水平連鑄圓坯連鑄生產工藝為研究對象,通過射釘實驗并采用Fluent數值模擬軟件建立凝固傳熱模型,研究了在不同工藝條件下圓坯結晶器內的溫度場分布與凝固傳熱過程,并對鑄坯質量進行了相關的檢測分析.通過本研究進一步明確了結晶器內鋼液的溫度場分布,及不同拉坯工藝對結晶器內鋼液溫度場變化的影響.結果表明:通過射釘實驗并采用Fluent數值模擬軟件建立凝固傳熱模型,可以有效分析水平連鑄鋼液的凝固傳熱過程,對改善鋼水質量有積極作用.
- 水平連鑄 /
- 凝固傳熱 /
- 拉坯工藝 /
- 質量缺陷
Abstract: The temperature distribution and solidification heat transfer process of round billet in different drawing blank technics were studied by means of solidification/melting models of Fluent software and pin shooting jointly, taking round billet horizontal continuous casting process as the research object. By this studies, the liquid steel temperature field distribution in the mold was obtained, and effects of casting process on steel temperature field inside of the mold was achieved. The results show that, through nailing experiment and numerical simulation using Fluent software, the solidification heat transfer model can be established, liquid solidification in continuous casting steel heat transfer process can be effectively analyzed, and the quality of molten steel can be improved.
- horizontal continuous casting /
- solidification heat transfer /
- drawing blank technics /
- quality defect