W-Ni-Fe高比重合金的SPS燒結行為

<listing id="l9bhj"><var id="l9bhj"></var></listing>

<var id="l9bhj"><strike id="l9bhj"></strike></var>

<menuitem id="l9bhj"></menuitem>

<var id="l9bhj"></var><cite id="l9bhj"><video id="l9bhj"></video></cite>

<menuitem id="l9bhj"></menuitem>

<cite id="l9bhj"><strike id="l9bhj"><listing id="l9bhj"></listing></strike></cite><cite id="l9bhj"><span id="l9bhj"><menuitem id="l9bhj"></menuitem></span></cite>

<var id="l9bhj"></var>

<var id="l9bhj"></var>

<var id="l9bhj"></var>

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

W-Ni-Fe高比重合金的SPS燒結行為

梅雪珍, 賈成廠, 尹法章, 陳黎亮

文章導航 > 工程科學學報 > 2007 > 29(5): 475-478

梅雪珍, 賈成廠, 尹法章, 陳黎亮. W-Ni-Fe高比重合金的SPS燒結行為[J]. 工程科學學報, 2007, 29(5): 475-478. doi: 10.13374/j.issn1001-053x.2007.05.007

引用本文:

梅雪珍, 賈成廠, 尹法章, 陳黎亮. W-Ni-Fe高比重合金的SPS燒結行為[J]. 工程科學學報, 2007, 29(5): 475-478. doi: 10.13374/j.issn1001-053x.2007.05.007

MEI Xuezhen, JIA Chengchang, YIN Fazhang, CHEN Liliang. Spark plasma sintering behavior of W-Ni-Fe cemented carbide powders[J]. Chinese Journal of Engineering, 2007, 29(5): 475-478. doi: 10.13374/j.issn1001-053x.2007.05.007

Citation:

MEI Xuezhen, JIA Chengchang, YIN Fazhang, CHEN Liliang. Spark plasma sintering behavior of W-Ni-Fe cemented carbide powders[J]. Chinese Journal of Engineering, 2007, 29(5): 475-478. doi: 10.13374/j.issn1001-053x.2007.05.007

梅雪珍, 賈成廠, 尹法章, 陳黎亮. W-Ni-Fe高比重合金的SPS燒結行為[J]. 工程科學學報, 2007, 29(5): 475-478. doi: 10.13374/j.issn1001-053x.2007.05.007

引用本文:

梅雪珍, 賈成廠, 尹法章, 陳黎亮. W-Ni-Fe高比重合金的SPS燒結行為[J]. 工程科學學報, 2007, 29(5): 475-478. doi: 10.13374/j.issn1001-053x.2007.05.007

MEI Xuezhen, JIA Chengchang, YIN Fazhang, CHEN Liliang. Spark plasma sintering behavior of W-Ni-Fe cemented carbide powders[J]. Chinese Journal of Engineering, 2007, 29(5): 475-478. doi: 10.13374/j.issn1001-053x.2007.05.007

Citation:

MEI Xuezhen, JIA Chengchang, YIN Fazhang, CHEN Liliang. Spark plasma sintering behavior of W-Ni-Fe cemented carbide powders[J]. Chinese Journal of Engineering, 2007, 29(5): 475-478. doi: 10.13374/j.issn1001-053x.2007.05.007

W-Ni-Fe高比重合金的SPS燒結行為

doi: 10.13374/j.issn1001-053x.2007.05.007

1. 北京礦冶研究總院金屬材料研究所, 北京 100044;
2. 北京科技大學材料科學與工程學院, 北京 100083

基金項目:

國家自然科學基金資助項目(No.50174007)

作者簡介:
梅雪珍(1981-),女,碩士研究生;賈成廠(1949-),男,教授,博士生導師

中圖分類號: TF124
計量
- 文章訪問數: 154
- HTML全文瀏覽量: 61
- PDF下載量: 8
- 被引次數: 0
出版歷程
- 收稿日期: 2006-10-15
- 修回日期: 2006-12-10
- 網絡出版日期: 2021-08-16

Spark plasma sintering behavior of W-Ni-Fe cemented carbide powders

1. Sub-institute of Metal Materials, Beijing General Research Institute of Mining and Metallurgy, Beijing 100044, China;
2. Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China

摘要: 采用放電等離子燒結(SPS)設備制備了93W-5.6Ni-1.4Fe高比重合金,燒結溫度范圍為1100~1180℃,保溫時間為5min.對不同燒結溫度下的樣品進行了密度、硬度、抗彎強度等性能測試,采用場發射SEM觀察了樣品表面形貌及斷裂行為.結果表明:采用SPS燒結,可以在較低的溫度下實現93W-5.6Ni-1.4Fe高比重合金的固相燒結,使合金致密化,并能有效控制鎢晶粒長大,提高材料的硬度、抗彎強度等力學性能.
- 鎢合金 /
- 放電等離子燒結 /
- 燒結性能 /
- 力學性能 /
- 微觀組織
Abstract: 93W-5.6Ni-1.4Fe cemented carbides were sintered by spark plasma sintering method, in which the sintering temperature ranged from 1100℃ to 1180℃ and the holding time was 5 min. The properties such as density, hardness and bending strength of the samples sintered at different temperatures were tested, and field spray scanning electron microscopy was used to investigate their appearance and rupture behavior. The results showed that 93W-5.6Ni-1.4Fe cemented carbides with high density were sintered by SPS at low temperature. Besides grain size could be controlled, the hardness and the bending strength could also be improved.
- tungsten alloys /
- spark plasma sintering /
- sintering property /
- mechanical properties /
- microstructure

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 154
HTML全文瀏覽量: 61
PDF下載量: 8
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回