累積疊軋焊工藝改善普碳鋼材料性能特征

<listing id="l9bhj"><var id="l9bhj"></var></listing>

<var id="l9bhj"><strike id="l9bhj"></strike></var>

<menuitem id="l9bhj"></menuitem>

<var id="l9bhj"></var><cite id="l9bhj"><video id="l9bhj"></video></cite>

<menuitem id="l9bhj"></menuitem>

<cite id="l9bhj"><strike id="l9bhj"><listing id="l9bhj"></listing></strike></cite><cite id="l9bhj"><span id="l9bhj"><menuitem id="l9bhj"></menuitem></span></cite>

<var id="l9bhj"></var>

<var id="l9bhj"></var>

<var id="l9bhj"></var>

留言板

尊敬的讀者、作者、審稿人, 關于本刊的投稿、審稿、編輯和出版的任何問題, 您可以本頁添加留言。我們將盡快給您答復。謝謝您的支持!

姓名
郵箱
手機號碼
標題
留言內容
驗證碼

累積疊軋焊工藝改善普碳鋼材料性能特征

許榮昌, 唐荻, 任學平, 溫永紅, 王小紅, 王耀奇

文章導航 > 工程科學學報 > 2005 > 27(4): 448-452

許榮昌, 唐荻, 任學平, 溫永紅, 王小紅, 王耀奇. 累積疊軋焊工藝改善普碳鋼材料性能特征[J]. 工程科學學報, 2005, 27(4): 448-452. doi: 10.13374/j.issn1001-053x.2005.04.015

引用本文:

許榮昌, 唐荻, 任學平, 溫永紅, 王小紅, 王耀奇. 累積疊軋焊工藝改善普碳鋼材料性能特征[J]. 工程科學學報, 2005, 27(4): 448-452. doi: 10.13374/j.issn1001-053x.2005.04.015

XU Rongchang, TANG Di, REN Xueping, WEN Yonghong, WANG Xiaohong, WANG Yaoqi. Improvment of the quality and mechanical properties of a plain carbon steel by accumulative roll-bonding[J]. Chinese Journal of Engineering, 2005, 27(4): 448-452. doi: 10.13374/j.issn1001-053x.2005.04.015

Citation:

XU Rongchang, TANG Di, REN Xueping, WEN Yonghong, WANG Xiaohong, WANG Yaoqi. Improvment of the quality and mechanical properties of a plain carbon steel by accumulative roll-bonding[J]. Chinese Journal of Engineering, 2005, 27(4): 448-452. doi: 10.13374/j.issn1001-053x.2005.04.015

許榮昌, 唐荻, 任學平, 溫永紅, 王小紅, 王耀奇. 累積疊軋焊工藝改善普碳鋼材料性能特征[J]. 工程科學學報, 2005, 27(4): 448-452. doi: 10.13374/j.issn1001-053x.2005.04.015

引用本文:

許榮昌, 唐荻, 任學平, 溫永紅, 王小紅, 王耀奇. 累積疊軋焊工藝改善普碳鋼材料性能特征[J]. 工程科學學報, 2005, 27(4): 448-452. doi: 10.13374/j.issn1001-053x.2005.04.015

XU Rongchang, TANG Di, REN Xueping, WEN Yonghong, WANG Xiaohong, WANG Yaoqi. Improvment of the quality and mechanical properties of a plain carbon steel by accumulative roll-bonding[J]. Chinese Journal of Engineering, 2005, 27(4): 448-452. doi: 10.13374/j.issn1001-053x.2005.04.015

Citation:

XU Rongchang, TANG Di, REN Xueping, WEN Yonghong, WANG Xiaohong, WANG Yaoqi. Improvment of the quality and mechanical properties of a plain carbon steel by accumulative roll-bonding[J]. Chinese Journal of Engineering, 2005, 27(4): 448-452. doi: 10.13374/j.issn1001-053x.2005.04.015

累積疊軋焊工藝改善普碳鋼材料性能特征

doi: 10.13374/j.issn1001-053x.2005.04.015

1. 北京科技大學高效軋制國家工程研究中心, 北京 100083;
2. 北京航空制造工程研究所, 北京 100024

基金項目:

國家自然科學基金資助項目(No.50375019)

作者簡介:
許榮昌(1972-),男,博士研究生

中圖分類號: TG142.1
計量
- 文章訪問數: 136
- HTML全文瀏覽量: 48
- PDF下載量: 6
- 被引次數: 0
出版歷程
- 收稿日期: 2004-06-27
- 修回日期: 2004-12-10
- 網絡出版日期: 2021-08-17

Improvment of the quality and mechanical properties of a plain carbon steel by accumulative roll-bonding

1. National Engineering Research Center for Advanced Rolling Technology, University of Science and Technology of Beijing, Beijing 100083, China;
2. Beijing Aeronautical Manufacturing Technology Research Institute, Beijing 100024, China

摘要: 在普通熱軋機上利用累積疊軋焊工藝對普碳鋼Q235進行了實驗研究,重點研究了壓下量(最大壓下量98%)、循環軋制次數等工藝參數對Q235鋼組織及性能的影響規律.結果表明:在普通熱軋機上應用累積疊軋焊工藝對同種材料進行焊合,不僅可以獲得連續、均勻的結合組織,而且使Q235鋼的組織得到明顯的細化,夾雜物分布更加均勻,材料的強度大幅度提高,抗拉強度達800MPa以上.
- 普碳鋼 /
- 累積疊軋焊 /
- 組織細化 /
- 性能特征
Abstract: Industrial experiments of Q235 plain carbon steel by Accumulitive Roll-Bonding (ARB) process were carried out. The effects of deformation temperature, reduction (the max reduction 98%) and cyclic roling pass on the microstructure and mechanical properties of the steel were investigated. The results showed that a steel with ultrafine grains and higher mechanical properties could be obtained on a plain hot rolling mill by ARB process. It was also proved that the interracial microstructure was continuous and homogeneous because of the same material rolling.
- plain carbon steel /
- accumulative roll-bonding /
- microstmcture evolvement /
- mechanical properties

參考文獻(0)

資源附件(0)

WeChat

點擊查看大圖

計量

文章訪問數: 136
HTML全文瀏覽量: 48
PDF下載量: 6
被引次數: 0

/

下載: 全尺寸圖片幻燈片

分享

用微信掃碼二維碼

分享至好友和朋友圈

返回